Why would you need to disconnect your battery?!?! Unless doing so resets the computer I guess to learn the increased airflow.. but technically it should auto learn and make adjustments on the fly.. Can any mechanic comment on this..
graphicsgod I’m not a mechanic myself.. but I’m very interested in mechanics.. I may have a answer, if u don’t disconnect the negative battery and just install the cold air intake itself.. when starting it, it will pop up the check engine light, which u will have to reset it for 10 or 20 minuets... Note: this isn’t actual answer, this is my possible answer for your question.. hope that helps! :)
D4RK KN1GHT 52 Just did this mod and no engine lights were triggered, nor any issues have happened! If anything it sounds soo good and feels like I have more power due to the increased air flow! I'm not sure if the computer compensated for the increased air flow or not, due to the fact I did not disconnect the battery..
graphicsgod hmmm..but if it theres isn’t a triggered check engine light or anything then ur all good.. but the computer part I’m not to sure about that... my previous answer was a maybe answer for you. But like I said if there’s no engine light ur good to go
@@KNfilters ok thanks, would u recommend a cold air intake on the v6? i can get and install my own pieces i'm just not wanting to spend the money for something not worth it
Need help i have this exact model part and a 2015 camaro v6 i cant find a water repellent filter sock for it anywhere if someone could help much appreciated!!
Yes this system will fit a 2015 Chevrolet Camaro 3.6L. We have several systems for that vehicle, check them out on the following page www.knfilters.com/chevrolet/camaro/3.6l-v6-gas/2015/
Yes this system will fit a 2015 Chevrolet Camaro 3.6L. Check out the product page on our website www.knfilters.com/57-3078-performance-air-intake-system
My car ran great before install and now it will idle inconsistently and stall out shortly after starting. I disconnected the negative terminal during install and my car won't accept new part. CEL also came on for P0102 MAF sensor readings. I double checked that there isn't any loose connections and sensor has been cleaned. Any suggestions?
No this part will not work on a 2011 Chevrolet Camaro 3.6L, however there are a number of intake options for that vehicle. Check out the following link: www.knfilters.com/chevrolet/camaro/3.6l-v6-gas/2011/
All K&N intake systems provide a guaranteed increase in horsepower and torque with factory ECU settings. This system has been tested to provide an increase of 13.14HP and 14.44 LBFT. Check out the dyno chart on our website kandn.com/dynocharts/57-3078_dyno.pdf
@@KNfilters why should anyone trust YOUR dyno charts ???? Unless the car is tuned for the mod NO one will see an increase in HP.....in fact they may see a decline in performance......... FACT !!!
If he says "provided" one more time he's gonna catch this ass whooping "provided" by these hands
Lmao
I'm about to install this on my friends car. Thanks for the info.
The CTS uses the same air box and filter as the CTS-V 6.2L S/C, so I'm not really seeing it being a restriction on a 3.6l NA
what is the diameter of the pipe?
Omg stop saying "the provided hardware" and say the name of the tools. Would be more helpful
Why would you need to disconnect your battery?!?! Unless doing so resets the computer I guess to learn the increased airflow.. but technically it should auto learn and make adjustments on the fly.. Can any mechanic comment on this..
graphicsgod I’m not a mechanic myself.. but I’m very interested in mechanics.. I may have a answer, if u don’t disconnect the negative battery and just install the cold air intake itself.. when starting it, it will pop up the check engine light, which u will have to reset it for 10 or 20 minuets... Note: this isn’t actual answer, this is my possible answer for your question.. hope that helps! :)
D4RK KN1GHT 52 Just did this mod and no engine lights were triggered, nor any issues have happened! If anything it sounds soo good and feels like I have more power due to the increased air flow! I'm not sure if the computer compensated for the increased air flow or not, due to the fact I did not disconnect the battery..
graphicsgod hmmm..but if it theres isn’t a triggered check engine light or anything then ur all good.. but the computer part I’m not to sure about that... my previous answer was a maybe answer for you. But like I said if there’s no engine light ur good to go
all mods recommend disconnecting battery so you dont cause a short
Will it fit a 2015 rs Camaro
Yes, this system will fit a 2015 Camaro 3.6L
How much is this? K&N products are too expensive.
Man Tran 300
tryna install cold air intake on my 97 camero rs
We don't have a kit for a v6 car but if you have the 5.7L v8 check out the following www.knfilters.com/57-3010-1-performance-air-intake-system
@@KNfilters ok thanks, would u recommend a cold air intake on the v6? i can get and install my own pieces i'm just not wanting to spend the money for something not worth it
Please feel free to contact our Product Specialists at 800-858-3333 or tech@knfilters.com with your question for a detailed answer and support.
How about 2015 v6?
Check out the following page www.knfilters.com/chevrolet/camaro/3.6l-v6-gas/2015/
Need help i have this exact model part and a 2015 camaro v6 i cant find a water repellent filter sock for it anywhere if someone could help much appreciated!!
Check out the following link for a compatible filter wrap www.knfilters.com/rc-5107dk-air-filter-wrap
Would a 2020 k&n v6 air intake fit a Camaro 2015 v6 lt
Yes this system will fit a 2015 Chevrolet Camaro 3.6L. We have several systems for that vehicle, check them out on the following page
www.knfilters.com/chevrolet/camaro/3.6l-v6-gas/2015/
Does this fit a 2015 Camaro LT V6?
Yes this system will fit a 2015 Chevrolet Camaro 3.6L. Check out the product page on our website www.knfilters.com/57-3078-performance-air-intake-system
Yo quiero ver el video pero con camaro 2001
this is ilegal in california ?
Yes, this system is legal for use in all 50 states. Check out the product page on our website www.knfilters.com/57-3078-performance-air-intake-system
Will this fit on a 2016?
No, this will not fit a 2016 Camaro 3.6L. Check out the following page for products that will : www.knfilters.com/chevrolet/camaro/3.6l-v6-gas/2016/
@@KNfilters okay thank you!
I can’t find out where to add my k/n oil filter at I put the air filter on but u cane with small one too I gave 1998 z28 LS1 Camaro
Please contact our product specialists at 800-858-3333 or tech@knfilters.com for help with your question
Why does my car keep turning off
Please contact our product specialists at 800-858-3333 or tech@knfilters.com. They will be able to quickly help you resolve the issue.
Did you ever figure out what the issue was?
My car ran great before install and now it will idle inconsistently and stall out shortly after starting. I disconnected the negative terminal during install and my car won't accept new part. CEL also came on for P0102 MAF sensor readings. I double checked that there isn't any loose connections and sensor has been cleaned. Any suggestions?
@@matthewsparks113 did you make sure you put the mass air flow sensor in the correct way
Its out of stock...
Does this work on a 2011
No this part will not work on a 2011 Chevrolet Camaro 3.6L, however there are a number of intake options for that vehicle. Check out the following link: www.knfilters.com/chevrolet/camaro/3.6l-v6-gas/2011/
waste of money if you don't have the car tuned properly for this mod......
All K&N intake systems provide a guaranteed increase in horsepower and torque with factory ECU settings. This system has been tested to provide an increase of 13.14HP and 14.44 LBFT. Check out the dyno chart on our website kandn.com/dynocharts/57-3078_dyno.pdf
@@KNfilters why should anyone trust YOUR dyno charts ???? Unless the car is tuned for the mod NO one will see an increase in HP.....in fact they may see a decline in performance......... FACT !!!
@@jessieismyfriend I wanna get a cold air intake for my 2015 Camaro so should I get a tune first before I even get the intake?
@@jacobcardenas9697 get the air intake installed and then have it tuned by someone who knows what they're doing
Bruhh it sounds the same 😂😂😂
No it doesn’t lol
@@cameronsloan1873 yeah it definitely didn't make any difference in sound
You mad?