Hi good day I need a blank key for a 98 c class what's the method you use to find the correct key for the car and can the im508 program that key the EIS is a 202/ 208/ 210
Hi love your videos my man it’s been a pleasure watching you. I’ve learned so much from you!! 👏🏻Thanks! I just have a quick question here…..from what I see I cannot generate a new key when all key are lost without the Apb102 IR Kablo APB102 IR. From where can I buy this key simulator Apb102 IR Kablo APB102 IR i cannot find it anywhere and it’s not available in the full upgraded package….which I bought. And is it possible to generate a new key without this simulator? Thanks 🙏🏼
Thank you for you support 🙏 To each Mb model is different. Actually if you are doing AKL situation , it’s a lot better doing on the bench. I do have some videos that show how to do AKL , some need simulator some don’t
did you used autel on many EIS modules? i had 3 one after the other that the tool could not read. 211 211 221. i got a new gbox but that didn't solved the mystery either.
Great video! However the instructions clearly state “if the key cannot be turned to the on position you must hold it there” or something along those lines I think you were just going fast and didn’t read it correctly lol
What keys do yiu use as blank? Xhorse? If yes, is it needed to be programmed for w221 by xhorse plus, or it can be used just like brend new empty blank?
You never need the j2534 it's mainly for programing modules with dealer software. It is not needed for keys unless you using a im608 because if you have a 608 there is no ports on it to connect to odb. So you gotta use j2534 on all odb programming for that reason.
@@autopurlieu What stable power supply do you recommend or you are using when programming on BMW and Mercedes to avoid any power issue that can brick a ECU?
After Ive purchased the Gbox, you have inspired me to offer the same to my customers.
I appreciate that brother.
You will do great 👍🏽
How mutch are you charging for something like this
Absolutely great instruction! Thank you!
Thank you
I love your videos thank you
I love your videos thank you
@@fuseiniadam7668 thank you
Yes if switch can not be turned on you must hold it during password calculation.
Hi good day I need a blank key for a 98 c class what's the method you use to find the correct key for the car and can the im508 program that key the EIS is a 202/ 208/ 210
Exellent work sir,well done😊
Thank you for your support 🙏
Hi love your videos my man it’s been a pleasure watching you. I’ve learned so much from you!! 👏🏻Thanks! I just have a quick question here…..from what I see I cannot generate a new key when all key are lost without the Apb102 IR Kablo APB102 IR. From where can I buy this key simulator Apb102 IR Kablo APB102 IR i cannot find it anywhere and it’s not available in the full upgraded package….which I bought. And is it possible to generate a new key without this simulator? Thanks 🙏🏼
Thank you for you support 🙏
To each Mb model is different.
Actually if you are doing AKL situation , it’s a lot better doing on the bench.
I do have some videos that show how to do AKL , some need simulator some don’t
@@autopurlieu I will check them for sure 👌 thanks and keep up the good work!
Thank you 🙏🏼
GREAT!!
did you used autel on many EIS modules? i had 3 one after the other that the tool could not read. 211 211 221. i got a new gbox but that didn't solved the mystery either.
Great job bro!
Thankx brother 🙏
out of interest im uk by the way what did you charge your customer for this?
Good job bro. Am a mecanic from senegal i plan on baying the im608. I think i need some training from you
Hi mate where did you buy the key?
Good video man!
Did you hold the key down for the whole process?
How long it's took you to get the password?
It took me 2 hrs on this one. The last end i did held the key and I don’t know if that help. But went through
Great video! However the instructions clearly state “if the key cannot be turned to the on position you must hold it there” or something along those lines I think you were just going fast and didn’t read it correctly lol
What keys do yiu use as blank?
Xhorse?
If yes, is it needed to be programmed for w221 by xhorse plus, or it can be used just like brend new empty blank?
Would you recommend the 508 over the 608 tool for starting off.
Im508 gives same key programming capabilities with im608.
I have im508, cheaper subscription
Which app used bro on mobile
That’s the autel website
Very good movie.Regards Adam Poland
Thank you sir
Perfect brother
🙏
🔥🔥🔥🔥
By any chance you east coast usa? Debating buying a pad unless i can find someone close with one.
What pad?
Is this an OEM key or an Xhorse branded key?
@@TheDersEffect8 aftermarket key fob.
OEM MB key fobs can only programmed by the dealer
You are good. Thanks anyway
I appreciate my brother
hello i have one quesstion can u make it fast mode in car with gbox with 608 pro2 ?
I don’t have a 608 pro.
But I bet you can, it won’t hurt it
Why use jump leap in engine ?
Sir what is the name of the software you use on your mobile phone?
In this video, it’s not a software. It’s the autel website
Tried 08 S550 today all keys lost Autel im608 pro via obd says eis type not supported
Its better to do it on bench.
@@autopurlieu I checked Autel coverage unlike what it showed you now it says s class 06-13 not supported all keys lost
@@user-Alhassany it says some part is supported on obd. I will still try it though on bench .
So I don’t know if it is still doable on bench as well ?
@@user-Alhassany open your device and will show tabs there for all keys lost
great job,now the buttons on the key works just fine right ?
Yes, when programmed the key fob to start . It programs the unlock and locks buttons as well
@@autopurlieu thanks for replying and help
that's a great info for me .
@@AsadGamer thank you for the support
Great videos. Curious why the hood was open?
You have to have a battery maintainer . Battery voltage Cannot drop below 12volts
@@autopurlieuДвигатель Вашей машины работает все это время ?
@@ЮрийТолстопуз been running great. No problems
How can I bring out diagrams using autel Im 508 I mean full wiring diagram
Are you looking for car wire diagram?
I don’t think autel does that.
You will need a car manufacturer software for that or maybe google search
Did you need the maxi flash?
I have im508. No I don’t
You never need the j2534 it's mainly for programing modules with dealer software. It is not needed for keys unless you using a im608 because if you have a 608 there is no ports on it to connect to odb. So you gotta use j2534 on all odb programming for that reason.
What website was you using to check if the car was supported
That’s the autel website supported list (the programmer I’m using )
@@autopurlieu Hello friend, can you give the name of the apk or web address of the program you are using? Thanks
@@ramcobabayaro it’s built in the programmer machine. You need to buy the whole machine
Where can I get the whole setup I just open a business and I need a programmer
Para que sirve la app que tiene en su Celular 📱
I just check on autel website that this car can be done an AKL situation through OBD
@@autopurlieu thanks my brother, Excellent video, I have learned a lot, I also have the IM508 equipment
@@armandoruiz9045 thank you for your support 🙏
Good job!penge vape🤣🤣
San vape ? 💨 hahaa
@@autopurlieu haha
How much do you charge customer for this?
It’s all depends on how far is the customer . From $300-$700
Each state is different
@@autopurlieu That is a lot of work imo.
@@autopurlieu What stable power supply do you recommend or you are using when programming on BMW and Mercedes to avoid any power issue that can brick a ECU?
@@jamescc2010 I’m using topdon t90a . But there’s plenty out there that comparable
@@autopurlieu What voltage do you set for Mercedes and BMW programming - 14.5v?
i need to get gbox and xp400 pro and start doing more than the obd2 process
Yes brother, this is not too bad. I know you can do it too
U can do this car by OBD just not with gbox need to do all keys lost slow not fast
It’s safer with gbox. You can try but risky . Even the tool will tell you that