How to Resurface Clutch Pressure Plate | Lining and Polish of Pressure Plate
HTML-код
- Опубликовано: 8 сен 2024
- Welcome to Wondering Skills.
Subscribe the channel Pakistani Trucks and Press Bell Icon for getting notification of My channel Wondering Skills videos.
How to Resurface Clutch Pressure Plate | Lining and Polish of Pressure Plate
#pressureplatelining
#polishpressureplate
#wonderingskills
![ARGENTINA vs. CHILE [3-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 7](http://i.ytimg.com/vi/De3AWmXzhuA/mqdefault.jpg)
These gents do a hell of a job with the equipment they have! Most mechanics and, or machinists wouldn’t try to fix this issue with primitive tools and equipment. These guys are lucky to have the items they need basic as they are. Good job, thanks for the video.
the problem with using a grinder for facing all the clutch is that grinding stone is constantly shrinking so your cut comes out at a slight angle
Very tru
Exactly what I was saying/thinking through the entire video.
@@markarita3 Yeap... I thought the same. If they adapted a grinding stone........
works for surface grinders
I know its not the same, but the same principle
@@rexaitken Surface grinders barely kiss the surface (or at least, they should). That plate should've been machined, not grinded.
i like his safety squints and his invisa steel toes also nice use of his eyecrometer when setting up the plate
haha😂
“Eyecrometer” 😂😂😂😂you shootout
Specialist equipment
Eyecrometer 😄 🤣 😂
The guy is an employer not an employer. He uses the tools and procedures he was given/taught. Stop giving shit about the fact that he was born in a 3'rd world country. Like someone else was saying he gets the job done, regardless of the fact that he doesn't have all your fancy tools and safety procedures...
Interesting your creativity, remembering that it is not the correct one, but only we know our needs. Greetings from Brazil 🇧🇷
That's a very creative use of what you have to give life to an old part, maybe wear some safety glasses and protect the inner working of the lathe.
Диск в утиль. Он весь в трещинах. ТБ на высшем уровне.
А образива для станка очень полезна😂
Да и вообще резец в станке на х.я ставится?
Как говорится из г0вна в г0вно по красивее!🤣🤣🤣🤣
It's only pressure plate don't deserve red carpet in our these guys good job
Видео 👍, персонаж просто гений своего дела😁.
Guys, protect the lathe ways from grinder grit.
I would be more worried about the 100 pound parts they keep dropping on them.
And weld splatter🤣
These guys use the lathe as ground when welding on it. It’s basically ruined already. They don’t care if the ways wear and it turns tapers
And use a mask!
Eye protection? Grind and grind ... but cracks still there ... stupid waste of time ...
Pakistanis learned a long time ago that cracks make the gripping force that much better😊
Agree ☺️
Right
this is the cleanest shop yet, with newer equipment. nice!
Сразу видны технологии сверх людей
Pakistani work force is very talented......
Презентация нового обрабатывающего центра!
Even if it was a proper resurface (which it was not, the grinder stone shrinks as it grinds) the plate is still thin after the "repair" a more important it is still cracked.
That's a very first world observation. AKA correct
Sometimes that is the best they can do with the gear on hand.
Сначала увидел резец на токарном,подумал -"Что то новое"
Ан нет,прицепили болгарку и погнали точить...
Но парадокс в том что работает,если бы не работало,то не делали бы!..
С языка снял
👍
Best possible finish when lathe spindle running in reverse and using machine driven cross feed. But you're doing what you can with what you've got. Dial indicator and dead-blow hammer would help setup.
There are no dial indicators in Pakistan - any instruments that have needles in them are considered Haram - against Islamic Policies.
Pretty much any good shop practice would be an improvement but Pakistan.
Couldn't agree more. I used to get best results using a stone in my air grinder. To have a nice lathe and no dial indicators is strange.
@@TheFeller1554 yes you are right i have much better improve know i made every instruments cnc machine
Наилютейший чувак. В России с индикатором не все могут выставить
Глаз набитый осталось морду набить!🤣🤣🤣
I like the grinder set up!
это он еще сож не включил)) Направляющим станка от абразива хана, легким токаря хана, диск сцепления в трещинах
Unbelievable. Never imagined such a special purpose machine. Yes, care needs to be taken on the wear of the angle grinder wheel for flatness of the clutch surface. Awesome application/ approach though. We all can work on it. Much respects 🙏✊✊✊✊✊
A very effective idea for grinding the clutsh plate when using an angle grinder. Congratulations 👌.
Thank you 😀.
I take it most people retire both young and blind from this profession over there.
Great Idea!
excelente video saludos from Chile, pero faltan eye protection
Absolutely hilarious!
I know right. Should be titled "The part that got me fired for passing as good".
Widziałem już,po pierwszym filmie , że dla was nie ma rzeczy niemożliwych do. zrobienia.Pozdtawiam z Polski.
Great video 👍
Was glad to see him use a straight edge after grinding because even though I am NOT a machinist I would not expect the flex in the grinder setup to flatten/true the flywhell like a rigid cutter head would. But, he could tll more about how untrue the surface was and I guess he determined the he did not need to cut it to true it.
"Нігде не бьйот, везде берьотъ!" (ДМ)
ДМ тихонько плачет в сторонке
Дикий народ
@@alexfisonlife зачем плачет??? может тихо конспектирует дабы не забыть ))
So good to see hands on work
Ёбушки-Воробушки! А мы индикаторами и точным инструментом пользуемся!!! Вот теперь знаю как протачивать надо!
Не вздумай. 😁 Я расскажу дядьке Максиму. Он тебя наругает.
Это корзина сцепления ооочень старого образца там пружина регулируемая болтиками, покрутят и ничего бить не будет)) А вот сам способ точнуть болгаркой мне понравился...резцы целее будут))
А как выставить по индикатору искривленную деталь?
@@1aleksiv искать базу...
@@user-rr3xi7hq7k где,в тундре? обработанная сторона искривлена,а обратная сторона литьё. Где её искать? Он нашёл правильно,касанием резца. Другое дело,нужно балансировать.
💯/💯👍👍طريقة جميلة... احسنت وفقك الله
I'm from Vietnam, nice to know you're passionate about mechanics 👍👍 let's share experiences together🤝💯
Cool 👍
Nice, goodjob frend
Пуканы горят у экспертов. Class!
🤣🤭💪
😄😄😄
Это токарный и круглошлифовальный станок.
Thanks for video keep going 🤠 greeting from Morocco
💗
As a machinist, I see a few issues. The first one is the lack of safety glasses. The second one is over tightening the clutch as it can cause premature wear on the jaws and other internal parts.
Lastly, trying to hold the pressure plate or brake rotors using the chuck jaws will not ensure a continuous even cut. The vibration and harmonics of cutting will cause unwanted movement in your work piece. A piece of rubber strapping or anything to absorb the vibration around the device will help somewhat but not eliminate it. Andy 🇨🇦
It’s not a Space Shuttle. It’s a truck serving the ignorant people of Third World. A place where life is cheap and easy to replace.
Thank you very much. periyakulam.pichaimani mec tamilnadu S.India
Lol when he put the grinder in the tool holder I lost it 🤣
Que buen ingenio, le sugiero usar protección ocular.
After watching the video, I want to try to put the flywheel on a LP turn table and grind it with a wood block and sandpaper
.... do not wonder if you get a better result after all !
That' is great style very good my dear brother ❤
you gentlements do very good werk, deepest respect!!!
ماشاالله زبردست
Jazak Allah
As a machinist the use of a hard mallet makes me cringe abit. But very creative with the grinder 👍
من الاردن تحية لشعب باكستان الذكي
Amazing skill complete
I wish I could emigrate to Pakistan to learn from you.
Thanks my brother, I wish to settle in Skardu, im from south africa.
First step..... get rid of your steel toes and safety glasses....next step.....get loose fitting long sleeves around the lathe.....3rd.....leave the t-handle in the chuck and turn lathe on.
I think you will learn more and the right way to b a turner
Need to get some covers made to catch all the grinding dust. It mixes with the lubricants to make a grinding paste that will wreck your lovely new lathe. I use old bits of carpet with sticky old grease to catch all the dust. Works well and protects my lathe guides. Cheap but very effective.
Look at the rest of the shop! Look at the part that I would assume, being he took it out of the chuck and threw on the floor, to be done. I think grinding dust on the ways is the least of their concerns
Wow! That's the craziest shit ive ever seen. Guess it must work though???? You can't "eyeball" the surface with a straight edge to see if it's truly flat. But, if that's all the tools you have--------
Great video, thanks for posting and sharing. I am long time subscriber. Your skills and adaptive methods amaze me more and more each day. May GOD bless you all.
Excellent, I love how you make tols to the job. زه خوښوم چې تاسو څنګه د اسانه کار کولو لپاره تول جوړ کړئ، تاسو هلکان ډیر هوښیار یاست مبارکي. له امریکا څخه
bravo, molto ingenioso,,
Love the guarding, the toe tectors. as for the truing obviously hasn’t got a clock, but what the hell it was cheap
like the way u held the grinder
are the pressure plate spring cover need to reface too so it can be back to original height?
Неандертальцы. Проверил на глаз биение, установил болгарку и отшлифовал. Это кошмар!!!!
вообще жесть, абразив и токарный стакок с открытой коробкой...
@@user-pr6mu9qx2s они чем то похожи на нас
@@user-yh5fn2mx3z согласен , мы так быстро прогрессируем, что даже как пакистанцы скоро не сможем работать)
@@user-pr6mu9qx2s да дядька
Тут всё на двух китах стоит: 1 максимально серьезная морда работника 2 собственно сам процесс но с той же серьезной рожей, а качество, результат допуски до пизды, расколется сварят также проточат и погнали
Гениально!
Svaka cast nemogu da Verujem to nasi strugari u Srbiji nemaju Pojma👍
Нраица, як новый 👍
Ещё походит)))
Should wear eye protection, most important.
But he does the job with what he got. that's impressive.
Should use lathe rather than grinder.
Баракалла йигитлар узбек техно дан салом
Interesting use of a grinding wheel to resurface a clutch pressure plate.
Всё нормально! Теперь, с большой вероятностью, мобиль при трогании будет биться как припадочный, и диски менять придется ежеквартально 😁
Это корзина сцепления ооочень старого образца там пружина регулируемая болтиками, покрутят и ничего бить не будет.
@@user-rr3xi7hq7k болтиками регулируются лапки. Поверхность нажимного диска должна быть плоскопараллельна маховику, чего подобной обработкой добиться довольно сложно.
@@vofn5092 плоскопараллельность задаётся при монтаже на вал.
I like that his shirt has a collar. Classy. Don’t always see that in a place like this...
Sir great work
Ek video broken propeller shaft & allinement repair ki bhi bnao
InshAllah wo kam nazar aaya to bana den gy
Like watching black holes collide.
I find it astounding that they would even spin it up with all the cracks in it, scrap only.
Super dear bro In our lathe we do cutting tool we use big griending wheels
Coloca o relógio comparador nesse disco mano .. É bem mais fácil !!!
👍👍👍👍👍thank you for sharing
Good wok
Great 👍
Thanks
nice and clean machine!
"Last week I couldn't even spell masheenist, now I is one."
Диски все в трещинах , весёлые парни.
У меня такие тормозные были...продал вместе с машиной!
Mujhe machine acchi lag rahi hai...
Khubsurat hai dekhne m
Shukrya
А токарный новый. Видимо, раньше на коленке делали😂
Скорее крашеный. В "коробке" видна шестерня не пришей к пизде рукав. Скорее всего убитую коробку переделали на ремни. А то чей то за с танок с фрикционом в виде натяжки ремня. А реверс как осуществлять допустим при нарезании резьб.
Masha Allah bohat khob bhai Jan
Жесть. Різець напевно один, боїться заламати, а кругів до болгарки навалом.
та не. просто станок шибко пыль абразивную любит )))
Классный был станок 🙄
Very good idea of a makeshift tool post grinder. If the grinder had a third support I guess it would make it more steadier.
Теперь Я видел ВСЁ😨
nice
Es la primera vez que veo un video de este tipo con algo nuevo(torno) jaja
Good idea👍👍👍👍
thank You
That abrasive dust is great for the bed ways.
It acts like graphite powder . Indeed great lubrication
It loves that kind!
precision, i like it 👍
🤣🤣🤣🤣
Ааааааа, пздц!!! Посмотри и не делай так Никогда!!!!
Không tiện mà là mài ! Ok , hay
So you machine it flat then throw it on the ground. Slow 👏
It was hot. I guess😉
@@Lorand24 Nope. They just throw everything on the ground.
@@Happy357mag yeah, for some reason that i dont understand they prefer the ground instead of a table. They do everything on the ground, i've seen several videos.
@@Lorand24 And wear sandals around heavy equipment
@@rooftopvoter3015 can't drop it on your foot if it is already on the ground!
You are jenius man👍
Good job reusing what u have
Ah a tool post angle grinder, handy.
Зачем, так? Чем ему резец не понравился.? И как по изношеной поверхности, он выставляет "биение".?
ну так и выставляет))
Good
Скиньте это видео бербраеру, пусть опыта набираеся
😂😂😂
Он до сих пор стеклотекстолит к станку не допускает, а тут с болгаркой на суппорте!
@@user-pm7mr9uj7l я просто чугун точить ненавижу. а тут такое.
Well that's nice. As the abrasive media wears from the grinder its diameter decreases making a minute curve in your part. WTG!