mate you are a legend, would never of thought to do this. my brand new saltist hyper was stuck, tried pulling it for 10min nothing. Put some forzen veggies on it and it came undone with no issues.
I have the same rod and ran into the same issues multiple times.The ice trick works well but you need to have ice when it happens and that's not always the case. What I did was take a piece of scotch brite of a high grit(can't remember the count) and went around the male end of the rod spigot/ferrule several times. After each pass I cleaned off the area and checked the fit,you don't want to remove much and you can't put back what you removed,obviously. The ferrule is unfinished so its easy and the fit is solid.I no longer run into any issues when separating the blank and have 100% confidence in the security of rod after this 1 minute modification. I have fished the rod hard after the mod for an entire season with 0 issues. Hope that can help somebody.
Man I hope this works. Got my Valkyrie World Expedition 8' XXH stuck damn good after fishing some backcountry musky in Ontario. I feel the foam handle at the base is going to interfere with good contact to the blank. If so I might have to wait and leave the rod out in winter lol
Just tried your idea.....using frozen peas and a pack of frozen mixed vegetables....left it for 5 minutes.....bingo came apart....cheers from across the pond 👍
that *plunk* when the two pieces separate sounds like suction was causing a lot of the problem too. Maybe megabass could put a vent in the end of the butt section.
Unfortunately I found this video after my dad broke my ugly stik gx2 by trying to use pliers it’s splintered now and I don’t have a fishing rod, it was my fault though because I tighten it too much
This is legit! Saved me from having an unuseable rod because it got stucked with the rings on the wrong direction. Kudos and thanks!
Thought this was going to be a waste of time. I'm amazed how well it worked, thank you for this
The TS Destroyers are LEGIT, gorgeous rods. Have the Black Jack and just ordered the Casino from your boy Ben.
mate you are a legend, would never of thought to do this. my brand new saltist hyper was stuck, tried pulling it for 10min nothing. Put some forzen veggies on it and it came undone with no issues.
Haha awesome! Veggies are good for something!
Works like a charm! Used two frozen bags of food. Waited 5 minutes and rod pieces slipped apart first pull. 👍 Thank you.
Great tip and video as always. That's a Beast of a Rod!
I have the same rod and ran into the same issues multiple times.The ice trick works well but you need to have ice when it happens and that's not always the case. What I did was take a piece of scotch brite of a high grit(can't remember the count) and went around the male end of the rod spigot/ferrule several times. After each pass I cleaned off the area and checked the fit,you don't want to remove much and you can't put back what you removed,obviously. The ferrule is unfinished so its easy and the fit is solid.I no longer run into any issues when separating the blank and have 100% confidence in the security of rod after this 1 minute modification. I have fished the rod hard after the mod for an entire season with 0 issues. Hope that can help somebody.
You saved me! Worked like a charm!! Thanks for posting. 5 star review!!
Haha crazy how well it works!
Dude that was so friggin rad,never seen that before,good 💩Oliver 👊👊👍
Some great info.. I use an archery arrow puller...rubber gripper. Works perfectly 👌
Thank you. I put an ice pack on my rod for about 5 minutes and it came apart pretty easily!
Man I hope this works. Got my Valkyrie World Expedition 8' XXH stuck damn good after fishing some backcountry musky in Ontario. I feel the foam handle at the base is going to interfere with good contact to the blank. If so I might have to wait and leave the rod out in winter lol
I got the same problem with my Megabass evoluzion white python. I'm going to have to try this out.
Have a st croix I haven’t pulled apart in 2 years tried for 10 mins and watched this immediately came apart
Thank you..this helped me out
You gonna be fishing Torch? Or something on the east side? I’m from Michigan.
This worked like a charm...Thank you so much
Just tried your idea.....using frozen peas and a pack of frozen mixed vegetables....left it for 5 minutes.....bingo came apart....cheers from across the pond 👍
This 100% works! Thank you so much
Hi ! Could you telle me the distance between the reel holder and the butt of the rod ? Thanks !
Pertinent information right there
This worked, thanks! 👍
Cold water also works well. I used a bottle of cold water. It works well thanks bro...👍👍👍👍👌👌👌👌
that *plunk* when the two pieces separate sounds like suction was causing a lot of the problem too. Maybe megabass could put a vent in the end of the butt section.
Unfortunately I found this video after my dad broke my ugly stik gx2 by trying to use pliers it’s splintered now and I don’t have a fishing rod, it was my fault though because I tighten it too much
THANKS! This really works! Za moje kolege iz Srbije ovde mogu pogledati rastavljanje zaglavljenog ribolovačkog štapa!!!
Thanks bro. Its perfectly working 👍👍👍👍👍👍
have you fished the hinkle trout on that rod? How does it hold up?
That rod throws 24oz. The hinkle is like a senko on that thing haha.
@@OliverNgy appreciate it
Terimakasih banyak informasinya
Nice shirt!
Brush around a bit with 800 grit sandpaper. If the road is carbon. Then the congestion will decrease. Brush around a bit. Don't do too much.
Can I use liquid nitrogen
I’ve yet to find a video to help me fix my issue my reel is stuck in the brass peises do you have any tips
Did you try using the ice blocks? Should work in a similar fashion.
Ice packs did the trick! I owe you a pizza and a beer! Thanx!
Amazing how well it works right!?
Where can I purchase one of those rods?
bit.ly/2N96ldM here you go!
Amazing
Thanks
It doesn’t work on metal ferrules
Neat trick
Thx alot
Beauty!!!
Use bicycle rubber tube..
Ohhh c'mon legit ❤️❤️❤️❤️❤️
It didint work😔😔😔
Slap some Smith Rod Ferrule Wax on there while you have it apart.
Buy a can of loctite freeze and release to spray on it
Just took off my butt joint Shimano Shaula
600 bucks to ship a rod! Bullshit!!!!!
That's how we felt!