I have a 2013 Ford F-150 fx4 eco post and wanted to get the 4.5 in lift kit from super lift but was wondering would coilover fit in the future for the front or back and what size.
Does this lift allow you to use your factory Ford 20"s wheels? I know you can cram 35's on a leveling kit no problem, but with Lift kits I'm getting a lot of conflicting information about whether you can use you factory 20"s wheels or not, or whether you have to get aftermarket wheels.
I had my stock 20s on my 4 inch zone for about a week until my new ones arrived had no problems, I believe if your tire is too wide it might rub on the inside components.
You definitely can. I have a 2.5” level and i still fit 35” tires on 20” rims, might have to do a little trim but i want to get this lift for the extra night.
@@NoonMight So I ended up going with a BDS 4" and adding the Fox 2.0 leveling coilovers to the front. Backed them down to just .5" to achieve the 4.5" look of this lift. It was pricey for sure but I like the BDS warranty and plan to have this truck at least another 7-8 years. As for the wheels, kept the stock platinum 20" and put my old 295/65 on, but went ahead and cut the crash bars since I plan on upgrading to a bigger set of wheels/tires soon, probably around spring break.
@@michael5704 not with the 295/65-20 but I did just this month put 35x12.50-20 Ridge Graps on and it needed .25" spacers in the front. Without the spacers it would just barely rub the sidewalls on the knuckle. I may not have needed them if I went with a less aggressive pattern sidewall on the tires, like maybe the Terra Grappler. No spacer needed on the rear.
Yes but you can fit 35s on a level kit on a Ford F150. I have a 17 F150 with a level with 35's on 20x9 wheels, rubs a little on the plastic when i turn right but thats it.
Hi Miguel Hernandez, unfortunately we weren't able to track down the size of these exact tires, but we recommend 33x12.50’s or a metric 34” tire to clear with no trimming.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Best vidéo ever for installation
I have a 2013 Ford F-150 fx4 eco post and wanted to get the 4.5 in lift kit from super lift but was wondering would coilover fit in the future for the front or back and what size.
I have the 6” lift installed. Is there anyway I can lower it to 4.5 ?
Has anyone installed this? And if so dose the factory skid plates fit with this lift kit
Does this lift allow you to use your factory Ford 20"s wheels? I know you can cram 35's on a leveling kit no problem, but with Lift kits I'm getting a lot of conflicting information about whether you can use you factory 20"s wheels or not, or whether you have to get aftermarket wheels.
I had my stock 20s on my 4 inch zone for about a week until my new ones arrived had no problems, I believe if your tire is too wide it might rub on the inside components.
Does this work on 2WD 2016 f150?
2017 - Can I keep my stock 20" rims and put 295/65 tires on with this kit?
Yes. You can go all the way up to 35s with a 4” lift. Sorry I’m late.
You definitely can. I have a 2.5” level and i still fit 35” tires on 20” rims, might have to do a little trim but i want to get this lift for the extra night.
@@NoonMight So I ended up going with a BDS 4" and adding the Fox 2.0 leveling coilovers to the front. Backed them down to just .5" to achieve the 4.5" look of this lift. It was pricey for sure but I like the BDS warranty and plan to have this truck at least another 7-8 years.
As for the wheels, kept the stock platinum 20" and put my old 295/65 on, but went ahead and cut the crash bars since I plan on upgrading to a bigger set of wheels/tires soon, probably around spring break.
Did you have to run rear wheel spacers?
@@michael5704 not with the 295/65-20 but I did just this month put 35x12.50-20 Ridge Graps on and it needed .25" spacers in the front. Without the spacers it would just barely rub the sidewalls on the knuckle. I may not have needed them if I went with a less aggressive pattern sidewall on the tires, like maybe the Terra Grappler.
No spacer needed on the rear.
How does it ride? Stiff?
also what wheel size is this? 35/12.5r20?
Can this lift fit 35s
Yes but you can fit 35s on a level kit on a Ford F150. I have a 17 F150 with a level with 35's on 20x9 wheels, rubs a little on the plastic when i turn right but thats it.
@@Papi-mg5ck Okay Thanks Bro
Hi +A.B. Powersports, we recommend 33x12.50’s or a metric 34” tire to clear with no trimming.
@@SuperliftSuspension I have the same lift with 35' toyo rt tires and dont rub at all
@@Papi-mg5ck did you install 35's on this 4.5" lift? What year is your F-150? I just purchased the kit and 20x9 0offset, 35x12.5
Does this truck have rear wheel spacers?
no
What size is that rear block?
Likely 3" - if it were 4" there would be rake
What size tires are those
Hi Miguel Hernandez, unfortunately we weren't able to track down the size of these exact tires, but we recommend 33x12.50’s or a metric 34” tire to clear with no trimming.
@@SuperliftSuspension ok,tnks
@@MiguelHernandez-yh4jj The tires are 35"x12.50" on 20" Wheels
@@MiguelHernandez-yh4jj is this your truck?
Can you add coil overs to a 4.5 in super lift kit from and back