I already did, thank you for that Kyle. I guess you could've stopped at 1,5-2k$, because this is probably the mark where "normies" would stop paying attention and stick to their similar priced all in one machines. For me the LMLM is a beautiful, durable machine, but the horizontal lever is just a fancy dip switch and you cannot do flow profiling with it. So why bother spending so much money? I only started recently with Espresso (after researching a full year) and I went with an ECM Puristika and a 1ZPresso K-Plus ... waiting for the WW KEY Grinder. :) Not cheap, no milk, but very small footprint and a E61 grouphead with all the bells and whistles (temperature sensor, flow profiling) I could've asked.
@@kpurpose1078 great machine! Well designed. For the price and value I’d personally opt for the Bianca but I understand why others would prefer the ECM.
Pro-tip for the Flair Neo: You can unscrew the bottom part of the pressurized portafilter and essentially turn it into a non-pressurized basket and use proper espresso fine grinds with it, I've been making much better espresso with it now without the pressurized bottom.
Great video. As a Gaggia Classic Pro owner, I would add that these machines have incredible community support for repair and modification. This means you can get in cheap, and later on you can add a 9 bar OPV and PID for a couple hundred bucks and breathe new life into the machine.
I recommend this machine to people starting out because of the community. The Silvia has a very robust community as well. Both have great parts availability.
The Gaggia also lets you do a very primitive form of pre-infusion or flow profiling by diverting water through the steam wand. The only frustrating thing can be the lack of steam pressure if you miss the sweet spot to start steaming before the boiler turns off again
For 700 ish I went for Lelit Anna PID + Mignon Silenzio. 2.5x boiler size of GC, way better temp stability and steam power, built in pressure gauge and PID. 57 mm is an annoyance but everytime I get accessories I find more. I think that's a far superior choice over a GC.
just got a Lelit P41PLUST for 300 second hand, got a mazzer super jolly for 200 second hand. before this I had a nuova simonelli cup commercial plumbed in, the grinder was absolutely good enough for it. I don't think actually that this grinder is not good enough for almost anything which is ridiculous at 200 usd. the Lelit I like, but after the commercial NS it's obviously a step back. at least it heats up way quicker :)
In US anna is definitely a superior choice, PID for only 120$ more than GC. Here in Russia to get PL41T you would have to pay 230$ over the GC. A price of lelit fred.
I own the Niche Zero and a modified Gaggia Classic Pro, with a PID, naked portafilter, 9 bar OPV mod and pressure gauge. Got the Gaggia second hand for 200$ and the mods added another 150$. Got the NZ for 400$ from a friend. This 750$ setup produces coffee that a new and unmoded 3000$ setup will do, if you are not interested in milk! So if you are on a budget, look for bargains and get your hands dirty!
Just imagine all the possibilities when you include used gear. I got an older Rancilio Silvia and Rocky, both in perfect working condition, for $700 combined.
My setup is the Flair 58, Fellow Stagg kettle and the Niche Zero (and I use Bellman steamer for the milk). I intentionally picked this set up over the La Pavoni for more consistent temperature control and much easier maintenance. I reckon it’s a pretty under rated set up, and I’m glad there’s a push for manual espresso machines that could rival machines that cost thousands. On the expensive side, Olympia Cremina would be nice but it’s $7000 here in Australia, and I’m not so sure whether its espresso quality justifies its price.
The temp issues for La Pavoni are a little overstated. I can do back to back shots and the only thermal management needed is running the portafilter under cold water and putting it in the group head for a minute or so. By the time I'm done grinding it's back to whatever Brea temp I want.
Another Aussie here. I too picked Flair 58 over La Pavoni for the same reasons and have the same setup you have with the exception of the Bellman, instead have a Bialetti Tutocremma which on a gas cooktop is pretty quick, simple and effective. That being said I don't do milk that much, on weekends I get to enjoy the espresso as is, but most times I will make a long black in a thermal mug and take it to work.
As a Rancilio Silvia and a Gaggia owner and as a very experienced barista. I would say a Flair with a pressure gauge will make better and more consistent espresso. I know many former Silvia owners have said the same
@@KyleRowsell I fully get that too. But it is amazing how the flair community pumps out amazing latte art using a simple French press or nanofoamer. In addition with the inconsistency you get from the Silvia espresso. It tends to impart off flavors in your milk drinks. No one likes bitter microfoam
mazzer super jollys or minis can be bought second hand for around 200 usd, can be modded to be doserless and when used correctly they're 100% retention-free. literally down to 0.1 grams - while the grind quality is even better than the niche with the bigger flat burrs.
My main issue with coffee channels that throw out a million machines at crazy prices is that they don't mention the cost of upkeep. I've read about the upkeep (maintenance, replacing parts, etc) of machines like the La Marzocco surpassing the cost of the machine after a handful of years and this was for personal use. Which is crazy for the price you pay. It sounds like a regular occurrence and definitely needs to be talked about more often.
My first google research is always "rancilio silvia parts". I want to see who is dealing the parts and what they cost. Who services the machine and where. I was going to buy quick mill but due the lack of parts dealers it was a no go
For those on a budget, I recommend getting a DF64 over the Niche Zero. It's half the price, even after upgrading to the titanium burrs, provides zero retention as well, and has a stronger motor.
DF64 is a great value, but I find it does better with lighter roasts than medium-> Darker stuff, so if that's your thing the Eureka burrs or conical burrs tend to do a better job with that (less clarity or a more traditional profile seems beneficial there).
What about for someone in the UK? The NZ is only £100 more than the DF64 with stock burrs, and most mods I’m seeing for the DF64 to address the annoyances are sold from USA and would cost a lot to ship. By the time I get it to where I want it I can pay for the NZ..
@@RavenSWE Hmm I'd imagine that if the costs associated with getting/modding the DF equate the the price of the NZ, I'd just grab the NZ. For where I'm from (SG), the cost of the DF + titanium burrs were less than half the price of the NZ, and were readily in stock (unlike the DF). I'd say both are great grinders, but go for the one that makes the most sense cost-wise in this case
My anywhere setup that I take camping, work, travel and at home: 9Barista $450, Bellman 50SS Steamer $100, 1Zpresso J-MAX $200. Making a Cappuccino better then a café anywhere you have fire, cooktop or portable stove priceless.
Great options. Just sent to my friend who was saying he feels it is time to get another machine. We both had the breville before. Mine died after 10 years his died after 5 years. I had told him to get the Bambino. Me, I finally saved up enough and last month got the La Pavoni Europiccola. I have owned a Baratza Virtuoso Preciso for 11 years and got a Comandante C40 cos you must have coffee in a power failure.
Have you gotten a chance to check out the Breville Barista Pro? It's $100 more than the BBE, but it has a better PID, a stepless grinder, a more powerful steam wand, and a built-in shot timer. It's not a 58mm, but it's easily a step above the BBE.
I'm using the Delonghi Dedica, switched out the original pressurized portafilter it comes with and instead used a 51mm bottomless portafilter. Also switch out the panarello steam wand with a proper stainless steam wand. For the grinder, I paired it with the Timemore C2 with their new E&B Burr, VASTLY improving its fine grind capabilities. Total comes to about $350 (Php17,000 where I'm from)
I know it wasn't in the video, but does anyone have experience with La Pavoni lever machines? I don't know how they compare to the machines on this video, but OMG are they beautiful! Great video, as always Kyle!
Setup I am looking at will net me about $2750(CAD) and I think its a winner. For the same price as a Rocket Apartamento, I'll go for the Lelit Mara X with a DF64. I like the compact footprint for my apartment, and it has more control than the Rocket will offer. Basically get a DF64 for free...
My current setup: Rocket Appartamento with an Eureka Mignon MCI (that’s the old home model before they came out with the new range). I am currently looking to upgrade. I would like more control over temperature and flow as well as a grinder that is capable of single dosing and offers more flavour clarity. Also, I don’t like wood applications. What would you go for? Please comment below. Setups I am currently contemplating: Machines: - Profitec Pro700 fitted with the flow control kit - LM Linea Mini with the brew pedal mod Grinders: - Eureka Mignon Oro XL - Niche Zero (I don’t like it’s look though) What other machines or grinders would you suggest? Upper price limit for a machine 5000€. Upper limit for a grinder 1500€.
I would have added the caveat that the Gaggia Classic Pro does require some mods to really get the bang for the buck. I've been researching machines for about 2 years now; and the main reason I haven't jumped on the Gaggia Classic Pro is because most users say that you need to know how to temperature surf as well as mod the machine. It's a little intimidating for anyone just getting into the hobby.
I think a better grinder is much higher priority. I personally went with a Profitec Pro 700 and Monolith Flat MAX instead of something like the La Marzocco and Niche in the same price range.
Just purchased a Silvia Pro! Got a great price on account of the ProX version just being released, also waiting on my Niche Zero to arrive :) Total setup cost was about $2050
As much as you (and many others) seem married to the Gaggia Classic Pro, when I was looking for an intro Prosumer-grade machine I found the Bezzera Hobby to be more consistent in temperature output and just more enjoyable to use in general. I paired it with the Eureka Mignon Silencio and haven’t had a moment’s regret; nor have I felt the need (at least not yet) to start considering upgrades.
Respectfully, I think you're overlooking the budget contraints that are the backbone of this video. The Bezzera Hobby may very well be superior to the Gaggia; it is also nearly double the price. The cheapest I've found it new is 799, which pretty much blows up the $550, $700, and $850 price points if you need to pair it with a quality grinder. For $1000, yes, but will the grinder you purchase with the leftover $200 be the quality of the Silenzio?
I just modded my gaggia classic by adding a PID, flow control knob, and 9 bar OPV spring. This basically makes a $500 machine to a $3000 machine. Highly recommend!
On the high end, add in Slayer SG, La Marzocco GS3. You could do a whole video on the "features" and differentiation on all of the units as you spend more. Boiler count/volume is a whole thing, then boiler vs HX is a whole thing. Then you have rotary vs vibe pumps. Then you have temp control PID vs thermostat + temp control/variance/thermal volume+stability. Then you have not only flow control, but flow profiling and the linea mini has neither with a fixed gicleur. You also have internal vs external pump, internal reservoir vs plumbed, etc. There's a ton of stuff to take in to account when picking a machine for home. Then for a business, you have all of that plus you need certifications like UL and NSF.
I absolutely agree with your setups. sometimes, especially in other countries (even in the US), getting a Niche is like finding gold in your courtyard. But, yes... I believe you nailed it. Some people would've chosen the Profitec 700 for its PID capabilities. In the end, ECM. La Marzocco, Crem, and so on are excellent machines at the top. For sure, why should I get a Silvia if I can get a Gaggia Classic?. It's the same but nicely built. I believe there's something you didn't address: fixing these machines. The electronic ones (Brevilles or Sages) areblack boxes, like a computer (as is the Decent). If anything stops working, that's it. The other machines... well, you can open them and fix everything with a couple of tools. That also goes for some electronically controlled grinders. I would stay away from them until they show they can last 10 or 20 years flawlessly as the Gaggia, the Silvia or the Lelit do. My grinder is 30 years old... just switching its fat burrs every three or four years make it a beast of an investment.
I agree with your comments. The Breville is a black box because it is an appliance. Where the higher end models are machines. Appliances have a shelf life. The Niche maybe great. Never owned one. It is a conical burr. One very influential person in Seattle says that is what you want. Most baristas would say use a flat burr grinder. I might argue the grinder is just as important as the espresso machine. The boutique grinders go on sale a few times a year and sell out in a matter of minutes.
I dont want to grind manually and the nieche isnt available to me so I ordered the Varia Vs3 V2 and I dont want the work involved with a flair but I want a good espresso in the morning for myself so I ordered the 9barista simple and beautiful. Its and expensive setup yes but there is no faff involved and I hope it will transform my Mornings from now on to excellence ❤️
3 года назад
I would like to give shout to DeLonghi EC 685 (or similar dedica). For 150 eur, its easily upgradable to unpressurized basket. Also, more budget friendly Eureka Mignon Manuale (name is different for Canada, i cant remember how its called), which is just 260eur, compared to 330eur for Silenzio. Literally, only difference is louder sound and no way of dosing, other than "push to grind" button. I have upgraded to Lelit Anna with PID year ago, but drinking mostly milk drinks, im waiting for Bianca to be delivered in next 5-6 days :). Its much cheaper in Europe, you can get it for around 1600-1700 eur.
After dialing in a shot on any of these machines, all using the niche zero, is there a night and day difference between shots at the bottom to top, and where does that break occur, if at all?
@@KyleRowsell thanks, Kyle. But I think it’s enough time to upgrade grinder machine. Could you please advise me Niche Zero or Eureka Mignon XL? Highly appreciate that!
Other Good options to consider: 1zPresso Hand Grinders, DF64 electric grinder, QuickMill Silvano Hybrid dual boiler (Boiler + Thermoblock with PID) La Pavoni Europicolla or Similar Lever Machine is also a great budget option (smaller portafilter size, manual lever) Lelit Elizabeth (mini dual boiler) La Spaziale machines (dual boilers, great features such as volumetric brewing, but smaller portafilters) Quickmill Vetrano 2b or Profitec Pro 700 / ECM Synchronika, (higher end dual boilers similar to the Bianca) For beginners especially I'd avoid HX (heat exchanger) machines. Agree/Disagree?
@@KyleRowsell understand that mini suggestion is coming from durability point of view. but i would think if grinder is more important than machine? if yes than maybe a titan matching with Bianca bcos of flow ctrl wld b better even if not DE. thanks for all the great vids so far. thanks
No Flair Pro 2? Straight from the Signature to the 58. I recently spent $420 combined, on a Flair Pro 2 and a 1Zpresso JX-Pro and it's been a wonderful upgrade from french press.
I've got a problem with my 20 year old Frankenstein Gaggia Classic. It makes great espresso. How do I justify to myself going to a Bianca, just for the milky drinks? The fact you have the Gaggia in 3 categories, speaks for itself. Damn you Gaggia, you're too good :(
I like the suggestions on espresso machine, but I’d have changed grinders more. Niche is great, but missing out on the flat burr category that most high end speciality cafes are favoring for taste profiles of lighter roasts. I’d be searching out the flat burr grinders in the prosumer market, before getting bells & whistles of the big boy espresso machines. For example, pair the Option-O with even the cheapest espresso machine on the list, and I think the average coffee drinker would taste the improvement VS niche + linea mini. Grinder in nearly all circumstances dictates cup quality far more than espresso machine. This from a decade working professionally in coffee :)
Can't argue with you there! Keep in mind I do recommend the Vario +, P64, Mignon silenzio and specialita in this video. But for sake of time - limited it to these options :)
@@KyleRowsell good point. I’m less familiar with the Mignon line of grinders. And maybe I just missed the flat burr vs conical info. Overall the video is great. I think the Vario doesn’t get enough love ;)
I just spent 2600 on a lelit Elizabeth and Eureka Atom grinder. This is my first espresso machine and grinder setup. I think Inmight have spent a little too much 😕. Just got it and have not used it yet; I hope that the learning curve is not that steep!
I love youre videos . I have the breville barista express paired with eureka specialita grinder i love it my eureka specialita has trully changed my espresso game .
My setup is all over the place: Flair classic with the Commandate Handgrinder for nerding around plus a Breville Barista and a cheapo electric grinder for the daily quick coffees. The Baratza Sette is on the list for Xmas gifts to myself.
I am having fun with my cheap Flair manual lever machine and Vietnamese phin filter both super cheap while I get my Rocket Cellini repaired. Looking for an upgrade but do not want to drop 10k on a machine. Looking at Profitec 800 and Bezerra Strega if I go spring lever or ECM Synchronika, Bezerra Duo Matrix and Lelit Bianca if I stay semi auto. Would love to try out a Dalla Corte Mina.
Coffee crema is hard to make and impossible to replace. Milk foam is easy. You don't even need that electric thingies, you can make it in any jar coktail shaker-style
bad advice..., at the 1500/1800 mark you should get a dual boil with a Faema E61 group like a Bezerra Magica and a decent grinder such as Eureka Mignon, with that you have 4.9/5 already semi professional
My intro setup was great. Sage babycino plus, the auto milk frothing was fantastic. Paired with the lelit fred grinder. Before moving onto a bianca and niche when I was ready to up my game.
I bought a Gaggia and a Sette 270 and I'm still struggling with the Gaggia. I always end up with a sour taste and the shots are really inconsistent. I'll have my grind size set for one shot and it will work fine and the next shot will come out either really slowly or way to fast. Seems to be related with the machine pushing with too much pressure. I would love a Bianca though. But for the moment I'm enjoying filter coffees (V60, Clever Dripper, Aeropress, Chemex, etc).
I hope you resolved the issue by now, but if not, am thinking you might want to add PID, flow control, and the nine bar spring to your Classic Pro. The nine bar spring would provide nine bars at the group head, and it's relatively easy to install. As for the rest of the mods, they are more involved. Also, make sure the coffee you purchase is specifically for espresso. Any others would potentially provide a sour taste in my experience.
Rancillio has a reputation for poor temperature stability for the money. The Breville is not a prosumer machine. It's an appliance made in China. If you get 5 years out of one you'd be doing very well. Agree on the Lelit. The Decent is the machine for those who believe to get excellent coffee you must sacrifice convenience. Linea Mini makes lovely coffee, but for the money I'd want to have flow control and/or volumetric dosing. Lovely tasting offee though. I'm surprised you didn't consider the Crem One or ECM/Profitec range.
My first "espresso setup" was the wacacao nanopresso and a random no brand hand grinder from costplus world market lol. i would use a power drill to grind my coffee😂 now i have the gaggia classic and Ceado E5P and i love the combo. May upgrade to another brewer in a few years
You may want to include La Spaziale Vivaldi plumbed in machine. Have tested shots pulled against a Linea Mini and no difference to me. Plus has programmable volumetric dosing as well as electronic programmable temp and front panel temp leds. Twin boiler, rotary pump Commercial power steam.Workhorse, super reliable more than enough for home use and many are used in small cafes. Famous made in Italy brand full on commercial machines in use throughout the world. I have zero commercial interest in LS but have owned one for many years. Half the price of the Linea Mini. La Marzocco gained ,uch notoriety as Starbucks used them mainly for their steaming ability before dropping them for superauto machines. Starbucks in no way should be used as an espresso yardstick.
Great video. I am wanting to get into proper espressos now. Quality of the espresso is #1 priority, then also the quality of the machine. No budget. I don't mind a couple steps, but I do not see myself getting to into the science with a very manual machine. What would you recommend for best match for me? Thank you
I've been using Flair Neo + Bottomless portafilter and the Baratza Sette 30. If you don't want to deal with manual grinding, I don't think you can get better bang for the buck. Thanks for the video!
Is the difference in espresso quality between the Breville Bambino and the Gaggia Classic such that the average person would be able to tell the difference?
Bambino comes with a pressurized baskets, which give noticeable inferior results, but you can upgrade to something like IMS (around $15-20). it also offers smaller space for heating cups up, which is very convenient (heating, not smaller space). 58mm group for Gaggia is also a nice addition, as most accessories are made with 58mm groups in mind. Gaggia in the US might be more expensive than in Europe, so keep that in mind. in Poland, where I live, the Bambino Plus is roughly around the price of Gaggia Classic, so I would probably consider them in the same bracket. Some also put into question the thermal stability of a Thermoblock system (called ThermoJet in Bambino), but that need some looking into.
You also would have to consider serviceability. I know there are a lot of threads on forums about fixing Gaggia Classic's problems, but I don't know about Bambino.
I would featured the 9barista somewhere in there. It's a different setup but an option to consider if only pulling 1 shot. I'd be curious to hear your views on it.
For the $2k budget, I think you should include the Lelit Elizabeth. For being a dual boiler with PID and great build quality, not sure what else competes for the dollars.
Great option for sure! I opted for the Breville here to make room for a great grinder in the 270 to fit under $2000. But the Elizabeth is definitely fantastic.
My goal set up is the Bezzera Duo MN with the Weberworkshop Key grinder. I would love to save up for the Victoria Arduino Eagle One Prima instead, but that would cost more than the set up I mentioned plus no grinder..so maybe sometime in the future that'll be my end game upgrade
Proud owner of a used Rancilio Silvia & Niche Zero! It's a great combo. I was struggling with an old Rancilio Rocky grinder until I upgraded to the Niche and my shots improved immensely. The Silvia is built like a tank so they make great 2nd hand bargains. And I love the 58mm portafilter because I can use VST baskets with it.
I’ve just picked up a Silvia v5 in basically perfect condition for £220 ($300), absolute steal. Waiting for Niche to restock in June and I’ll have my first setup for a very reasonable price
Quickmill Silvano was my first machine that could steam milk and brew coffee at the same time, it's a bit of a unique one since it's not quite a dual boiler it has brew boiler, and a thermoblock but has an extra vibratory pump so it can do both at the same time, which I probably utilized all but like 5x in the 10 years I used it :D Funny how having a machine that can do both was such a priority for me when i was shopping for a machine. Lasted 10+ years with basically no maintenance (before I upgraded and re-sold it), so I was pretty happy with it.
Lightly modded Gaggia Classic (OG) + Specialita kicks most of my local cafe's butts for pure espresso, no questions, bit it IS a gamble on temperature between a good shot and perfetto. I'm at the point where the gaggia could be replaced and I'm thinking mara X Vs Rancilio Silvia X pro . Does the Bianca make my decision redundant , ie just save up a bit longer lol
Without the pain in the a$$ of the workflow of manual espresso machines, the Signatur do more by they own even better than the gaggia classic pro (stock), you could control water temp (but it's not like ride a bike), the pressure aka Lance: flow , preinfusion etc... If you made some mods to the gaggia, you could possibly do more, but it's a super cheap way to enter in the espresso world and understand all the variables that an espresso have.
Do you have any videos that go nuts with the tech? Im an engineer and id honestly love to know how it all works down to the fundamentals (and maybe build my own machine while im at it)
Hello Kyle ! Thanks for the video...Quick question : I can not decide between the sage barista express vs the kit Gaggia Pro + Eureka grinder...what would you recommend and why ? Both in the same budget in my country :)
Really can't decide on my go to setup... Sage / Breville Oracle Touch or maybe the Dual Boiler with a decent grinder (maybe Sette 270WI). Really like that automatic milk thing, profiles and stuff from the Oracle Touch, but the dual boiler has more options for customizing. Also the integrated grinder and missing configuration for the amount of ground coffee might give me a headache because you might end up buying another grinder. Switched to an Aeropress with hand grinder (1Zpresso Q2) last year or sth after coming from different fully automatic machines and being sick of those hygienic problems that arise after time with all the damp coffee ground getting every in the machines. This really gives me headaches, a lot of pro and cons and €€€ / $$$ 😅
First off, awesome vid Kyle!! I was hoping you would do a follow up to the coffee kits setup video :)! Keep these up, they are my favorites. My setup is also 850 bucks! I've got a Gaggia Classic Pro with a DF64. They're both all white and I'm absolutely in love with it and the espresso it produces. Just wanted to say hello from a big fan from the Netherlands
I honestly think the Quick Mill Anita or the Bezzera BZ13 both deserved to be on here paired with a DF64 or a Baratza for the around 2 grand price. Hardly anyone makes an affordable heat exchanger machine these days the value for the money both of those offer especially with the Quick Mill getting into a full feature E61 Italian built machine for under 2k (love my quick Mill) and the Bezzera being NSF rated perfect for a small catering business, or a small gallery and an optional programable model very difficult to overlook. I think if you do a reboot you should considering adding one or both of those to the list.
That's how second hand market for GCP is created, just suggest paring it with affordable hand grinder and voila, 2 months after publishing you're getting a crowd of happy used GCP owners.
Dude great video I want to upgrade my machine so thanks for the overall heads up. I have the bambino and got the silenzio from watching one of your videos, now it's time to upgrade the machine. Keep them coming.
Hey Bud, my wife and I are opening a coffee trailer, what espresso machine would you recommend? We want to keep a tight budget as we starting? We have the Breville Barista pro. Wondering if that's enough or should we one of the ones in this video!
I’d truly appreciate if you smash that like button 👍🏼 which setup did I miss?
Haha this is very close to the list of recommendations I made to a colleague this week. Great vid, clear story!
I already did, thank you for that Kyle. I guess you could've stopped at 1,5-2k$, because this is probably the mark where "normies" would stop paying attention and stick to their similar priced all in one machines.
For me the LMLM is a beautiful, durable machine, but the horizontal lever is just a fancy dip switch and you cannot do flow profiling with it. So why bother spending so much money?
I only started recently with Espresso (after researching a full year) and I went with an ECM Puristika and a 1ZPresso K-Plus ... waiting for the WW KEY Grinder. :)
Not cheap, no milk, but very small footprint and a E61 grouphead with all the bells and whistles (temperature sensor, flow profiling) I could've asked.
Hi Kyle, what about the ECM Synchronika? What are your thoughts on that machine … with flow control.
@@kpurpose1078 great machine! Well designed. For the price and value I’d personally opt for the Bianca but I understand why others would prefer the ECM.
Great video Kyle! What about the Nomad for $230 (as a Flair alternative)?
Pro-tip for the Flair Neo: You can unscrew the bottom part of the pressurized portafilter and essentially turn it into a non-pressurized basket and use proper espresso fine grinds with it, I've been making much better espresso with it now without the pressurized bottom.
Thanks for sharing friend!
Great video. As a Gaggia Classic Pro owner, I would add that these machines have incredible community support for repair and modification. This means you can get in cheap, and later on you can add a 9 bar OPV and PID for a couple hundred bucks and breathe new life into the machine.
Love it! Thanks for the comment
I recommend this machine to people starting out because of the community. The Silvia has a very robust community as well. Both have great parts availability.
The Gaggia also lets you do a very primitive form of pre-infusion or flow profiling by diverting water through the steam wand. The only frustrating thing can be the lack of steam pressure if you miss the sweet spot to start steaming before the boiler turns off again
Yeah but the flip side of that is why is it missing PID and proper pressure to begin with?
@@sAmiZZle82yeah I quickly put the PID kit on my GCP for this reason
For 700 ish I went for Lelit Anna PID + Mignon Silenzio. 2.5x boiler size of GC, way better temp stability and steam power, built in pressure gauge and PID. 57 mm is an annoyance but everytime I get accessories I find more. I think that's a far superior choice over a GC.
just got a Lelit P41PLUST for 300 second hand, got a mazzer super jolly for 200 second hand.
before this I had a nuova simonelli cup commercial plumbed in, the grinder was absolutely good enough for it. I don't think actually that this grinder is not good enough for almost anything which is ridiculous at 200 usd.
the Lelit I like, but after the commercial NS it's obviously a step back. at least it heats up way quicker :)
In US anna is definitely a superior choice, PID for only 120$ more than GC. Here in Russia to get PL41T you would have to pay 230$ over the GC. A price of lelit fred.
I own the Niche Zero and a modified Gaggia Classic Pro, with a PID, naked portafilter, 9 bar OPV mod and pressure gauge. Got the Gaggia second hand for 200$ and the mods added another 150$. Got the NZ for 400$ from a friend. This 750$ setup produces coffee that a new and unmoded 3000$ setup will do, if you are not interested in milk! So if you are on a budget, look for bargains and get your hands dirty!
Just imagine all the possibilities when you include used gear. I got an older Rancilio Silvia and Rocky, both in perfect working condition, for $700 combined.
absolutely! I didn't include used or modded gear but the world of possibilities truly opens up when you go there.
Awesome. Where you get it from?
I got a Mazzer Super Jolly (Reddit used gear snag) and a Rancilio Silvia (extremely lucky goodwill find) for a combined $490.
Can only recommend going used. Got one old but sturdy gaggia Classic from 2001 on ebay paired with a Nemolux grinder for 75€
@@nreivajcg scouting out eBay and marketplace! Takes some time but you can save money.
My setup is the Flair 58, Fellow Stagg kettle and the Niche Zero (and I use Bellman steamer for the milk). I intentionally picked this set up over the La Pavoni for more consistent temperature control and much easier maintenance. I reckon it’s a pretty under rated set up, and I’m glad there’s a push for manual espresso machines that could rival machines that cost thousands.
On the expensive side, Olympia Cremina would be nice but it’s $7000 here in Australia, and I’m not so sure whether its espresso quality justifies its price.
Thanks for the thoughts and comment friend!
The temp issues for La Pavoni are a little overstated. I can do back to back shots and the only thermal management needed is running the portafilter under cold water and putting it in the group head for a minute or so. By the time I'm done grinding it's back to whatever Brea temp I want.
Another Aussie here. I too picked Flair 58 over La Pavoni for the same reasons and have the same setup you have with the exception of the Bellman, instead have a Bialetti Tutocremma which on a gas cooktop is pretty quick, simple and effective.
That being said I don't do milk that much, on weekends I get to enjoy the espresso as is, but most times I will make a long black in a thermal mug and take it to work.
As a Rancilio Silvia and a Gaggia owner and as a very experienced barista. I would say a Flair with a pressure gauge will make better and more consistent espresso. I know many former Silvia owners have said the same
Can’t argue with you! Many people desire steaming capabilities so that’s something I consider in listing these machines.
@@KyleRowsell I fully get that too. But it is amazing how the flair community pumps out amazing latte art using a simple French press or nanofoamer. In addition with the inconsistency you get from the Silvia espresso. It tends to impart off flavors in your milk drinks. No one likes bitter microfoam
mazzer super jollys or minis can be bought second hand for around 200 usd, can be modded to be doserless and when used correctly they're 100% retention-free. literally down to 0.1 grams - while the grind quality is even better than the niche with the bigger flat burrs.
My main issue with coffee channels that throw out a million machines at crazy prices is that they don't mention the cost of upkeep. I've read about the upkeep (maintenance, replacing parts, etc) of machines like the La Marzocco surpassing the cost of the machine after a handful of years and this was for personal use. Which is crazy for the price you pay. It sounds like a regular occurrence and definitely needs to be talked about more often.
My first google research is always "rancilio silvia parts". I want to see who is dealing the parts and what they cost. Who services the machine and where.
I was going to buy quick mill but due the lack of parts dealers it was a no go
For those on a budget, I recommend getting a DF64 over the Niche Zero. It's half the price, even after upgrading to the titanium burrs, provides zero retention as well, and has a stronger motor.
Another great option! Again - if you can find them in stock!
DF64 is a great value, but I find it does better with lighter roasts than medium-> Darker stuff, so if that's your thing the Eureka burrs or conical burrs tend to do a better job with that (less clarity or a more traditional profile seems beneficial there).
What about for someone in the UK? The NZ is only £100 more than the DF64 with stock burrs, and most mods I’m seeing for the DF64 to address the annoyances are sold from USA and would cost a lot to ship. By the time I get it to where I want it I can pay for the NZ..
@@RavenSWE Hmm I'd imagine that if the costs associated with getting/modding the DF equate the the price of the NZ, I'd just grab the NZ.
For where I'm from (SG), the cost of the DF + titanium burrs were less than half the price of the NZ, and were readily in stock (unlike the DF).
I'd say both are great grinders, but go for the one that makes the most sense cost-wise in this case
What is wrong with DF64 with stock burrs with Barista Pro ? Or would Sette 270/wi be as good?
My anywhere setup that I take camping, work, travel and at home: 9Barista $450, Bellman 50SS Steamer $100, 1Zpresso J-MAX $200. Making a Cappuccino better then a café anywhere you have fire, cooktop or portable stove priceless.
For those on a budget pick up a second hand Gaggia Classic, picked mine up for £300, brand new they're around £500
Great options. Just sent to my friend who was saying he feels it is time to get another machine. We both had the breville before. Mine died after 10 years his died after 5 years. I had told him to get the Bambino. Me, I finally saved up enough and last month got the La Pavoni Europiccola. I have owned a Baratza Virtuoso Preciso for 11 years and got a Comandante C40 cos you must have coffee in a power failure.
Me: Kinu M47 Classics + Flair 58, get the variable pressure and step-less grinder. And it’s CHEAP
$6,000 is the most I would spend on my next car or truck!!
Have you gotten a chance to check out the Breville Barista Pro? It's $100 more than the BBE, but it has a better PID, a stepless grinder, a more powerful steam wand, and a built-in shot timer. It's not a 58mm, but it's easily a step above the BBE.
I'm using the Delonghi Dedica, switched out the original pressurized portafilter it comes with and instead used a 51mm bottomless portafilter. Also switch out the panarello steam wand with a proper stainless steam wand.
For the grinder, I paired it with the Timemore C2 with their new E&B Burr, VASTLY improving its fine grind capabilities.
Total comes to about $350 (Php17,000 where I'm from)
I know it wasn't in the video, but does anyone have experience with La Pavoni lever machines? I don't know how they compare to the machines on this video, but OMG are they beautiful!
Great video, as always Kyle!
Shall we cover la pavoni in the future?
@@KyleRowsell why yes we should.
The Italians have STYLE!
Yes! La Pavoni is a beauty, but also the Olympia Cremina.......
@@raiuno90 I had never seen one before. Looks like they are hard to come by!
Setup I am looking at will net me about $2750(CAD) and I think its a winner. For the same price as a Rocket Apartamento, I'll go for the Lelit Mara X with a DF64. I like the compact footprint for my apartment, and it has more control than the Rocket will offer. Basically get a DF64 for free...
My current setup: Rocket Appartamento with an Eureka Mignon MCI (that’s the old home model before they came out with the new range). I am currently looking to upgrade. I would like more control over temperature and flow as well as a grinder that is capable of single dosing and offers more flavour clarity. Also, I don’t like wood applications. What would you go for? Please comment below.
Setups I am currently contemplating:
Machines:
- Profitec Pro700 fitted with the flow control kit
- LM Linea Mini with the brew pedal mod
Grinders:
- Eureka Mignon Oro XL
- Niche Zero (I don’t like it’s look though)
What other machines or grinders would you suggest? Upper price limit for a machine 5000€. Upper limit for a grinder 1500€.
My choice is a Cafelat Robot Barista with DF54 grinder (approx. 700 USD). I am still getting familiar with them, but they are very promising so far.
I would have added the caveat that the Gaggia Classic Pro does require some mods to really get the bang for the buck. I've been researching machines for about 2 years now; and the main reason I haven't jumped on the Gaggia Classic Pro is because most users say that you need to know how to temperature surf as well as mod the machine. It's a little intimidating for anyone just getting into the hobby.
I’m running the Normcore grinder and the flair Neo (without the gasket) and I LOVE IT.
I think a better grinder is much higher priority. I personally went with a Profitec Pro 700 and Monolith Flat MAX instead of something like the La Marzocco and Niche in the same price range.
Just purchased a Silvia Pro! Got a great price on account of the ProX version just being released, also waiting on my Niche Zero to arrive :) Total setup cost was about $2050
Wonderful!
As much as you (and many others) seem married to the Gaggia Classic Pro, when I was looking for an intro Prosumer-grade machine I found the Bezzera Hobby to be more consistent in temperature output and just more enjoyable to use in general. I paired it with the Eureka Mignon Silencio and haven’t had a moment’s regret; nor have I felt the need (at least not yet) to start considering upgrades.
many Lelits are also better, particularly when compared to newer GCs.
Respectfully, I think you're overlooking the budget contraints that are the backbone of this video. The Bezzera Hobby may very well be superior to the Gaggia; it is also nearly double the price. The cheapest I've found it new is 799, which pretty much blows up the $550, $700, and $850 price points if you need to pair it with a quality grinder. For $1000, yes, but will the grinder you purchase with the leftover $200 be the quality of the Silenzio?
I just modded my gaggia classic by adding a PID, flow control knob, and 9 bar OPV spring. This basically makes a $500 machine to a $3000 machine. Highly recommend!
Love it! Thanks for the comment
Good for you, but not sure why they didn't include PID as an option upon purchase. I would have gladly sent about $200.00 more for that option.
We are... interested in espresso ☕☕
I'd go with a GS3 AV paired with Mythos 1 Clima Pro grinder and a PuqPress for good measure
Hm, seems reasonable.
On the high end, add in Slayer SG, La Marzocco GS3. You could do a whole video on the "features" and differentiation on all of the units as you spend more. Boiler count/volume is a whole thing, then boiler vs HX is a whole thing. Then you have rotary vs vibe pumps. Then you have temp control PID vs thermostat + temp control/variance/thermal volume+stability. Then you have not only flow control, but flow profiling and the linea mini has neither with a fixed gicleur. You also have internal vs external pump, internal reservoir vs plumbed, etc. There's a ton of stuff to take in to account when picking a machine for home. Then for a business, you have all of that plus you need certifications like UL and NSF.
I absolutely agree with your setups. sometimes, especially in other countries (even in the US), getting a Niche is like finding gold in your courtyard. But, yes... I believe you nailed it. Some people would've chosen the Profitec 700 for its PID capabilities. In the end, ECM. La Marzocco, Crem, and so on are excellent machines at the top. For sure, why should I get a Silvia if I can get a Gaggia Classic?. It's the same but nicely built. I believe there's something you didn't address: fixing these machines. The electronic ones (Brevilles or Sages) areblack boxes, like a computer (as is the Decent). If anything stops working, that's it. The other machines... well, you can open them and fix everything with a couple of tools. That also goes for some electronically controlled grinders. I would stay away from them until they show they can last 10 or 20 years flawlessly as the Gaggia, the Silvia or the Lelit do. My grinder is 30 years old... just switching its fat burrs every three or four years make it a beast of an investment.
I agree with your comments. The Breville is a black box because it is an appliance. Where the higher end models are machines. Appliances have a shelf life. The Niche maybe great. Never owned one. It is a conical burr. One very influential person in Seattle says that is what you want. Most baristas would say use a flat burr grinder. I might argue the grinder is just as important as the espresso machine. The boutique grinders go on sale a few times a year and sell out in a matter of minutes.
I dont want to grind manually and the nieche isnt available to me so I ordered the Varia Vs3 V2 and I dont want the work involved with a flair but I want a good espresso in the morning for myself so I ordered the 9barista simple and beautiful. Its and expensive setup yes but there is no faff involved and I hope it will transform my Mornings from now on to excellence ❤️
I would like to give shout to DeLonghi EC 685 (or similar dedica). For 150 eur, its easily upgradable to unpressurized basket. Also, more budget friendly Eureka Mignon Manuale (name is different for Canada, i cant remember how its called), which is just 260eur, compared to 330eur for Silenzio. Literally, only difference is louder sound and no way of dosing, other than "push to grind" button. I have upgraded to Lelit Anna with PID year ago, but drinking mostly milk drinks, im waiting for Bianca to be delivered in next 5-6 days :). Its much cheaper in Europe, you can get it for around 1600-1700 eur.
Don't expect that Baratza grinder to last, I went through 2 of them in less then 3 years and finally gave up on Baratza.
You did not disappoint when you put the linea mini on top of the list… numero uno in the game!!
It's a beauty!
After dialing in a shot on any of these machines, all using the niche zero, is there a night and day difference between shots at the bottom to top, and where does that break occur, if at all?
Flair 58 and Kinu M47 classic. They’re my set up now 😊
Sounds fantastic!
@@KyleRowsell thanks, Kyle. But I think it’s enough time to upgrade grinder machine. Could you please advise me Niche Zero or Eureka Mignon XL? Highly appreciate that!
I already spent enough money on my Barista Pro, (Which provides a great shot) and here I am looking at other suggestions.
Other Good options to consider:
1zPresso Hand Grinders, DF64 electric grinder,
QuickMill Silvano Hybrid dual boiler (Boiler + Thermoblock with PID)
La Pavoni Europicolla or Similar Lever Machine is also a great budget option (smaller portafilter size, manual lever)
Lelit Elizabeth (mini dual boiler)
La Spaziale machines (dual boilers, great features such as volumetric brewing, but smaller portafilters)
Quickmill Vetrano 2b or Profitec Pro 700 / ECM Synchronika, (higher end dual boilers similar to the Bianca)
For beginners especially I'd avoid HX (heat exchanger) machines.
Agree/Disagree?
i would think a P100 + DE1XL would be much better option at 6k ish range compared to mini.
Totally agree
Even with the p64
Fair enough! There are so many different routes we could have taken in this video. Thanks for the comment!
@@KyleRowsell understand that mini suggestion is coming from durability point of view. but i would think if grinder is more important than machine? if yes than maybe a titan matching with Bianca bcos of flow ctrl wld b better even if not DE.
thanks for all the great vids so far. thanks
No Flair Pro 2? Straight from the Signature to the 58. I recently spent $420 combined, on a Flair Pro 2 and a 1Zpresso JX-Pro and it's been a wonderful upgrade from french press.
I've got a problem with my 20 year old Frankenstein Gaggia Classic. It makes great espresso. How do I justify to myself going to a Bianca, just for the milky drinks? The fact you have the Gaggia in 3 categories, speaks for itself. Damn you Gaggia, you're too good :(
I like the suggestions on espresso machine, but I’d have changed grinders more. Niche is great, but missing out on the flat burr category that most high end speciality cafes are favoring for taste profiles of lighter roasts. I’d be searching out the flat burr grinders in the prosumer market, before getting bells & whistles of the big boy espresso machines.
For example, pair the Option-O with even the cheapest espresso machine on the list, and I think the average coffee drinker would taste the improvement VS niche + linea mini.
Grinder in nearly all circumstances dictates cup quality far more than espresso machine.
This from a decade working professionally in coffee :)
Can't argue with you there! Keep in mind I do recommend the Vario +, P64, Mignon silenzio and specialita in this video. But for sake of time - limited it to these options :)
@@KyleRowsell good point. I’m less familiar with the Mignon line of grinders. And maybe I just missed the flat burr vs conical info. Overall the video is great. I think the Vario doesn’t get enough love ;)
My first setup was a Silva and a Vario. Sold it to a regular customer who still uses it daily. It’s got 10+ yrs on it now.
@@darylgrunau I agree! It’s why I reviewed the new vario + line!
@@KyleRowsell do they no longer make the straight Vario? Or are they all Vario+ now?
What a cinematic intro, Kyle! You've outdid yourself! Amazing :D
Thanks Filip! Always trying to improve!
What was that transparent box on the bambino for?
I just spent 2600 on a lelit Elizabeth and Eureka Atom grinder. This is my first espresso machine and grinder setup. I think Inmight have spent a little too much 😕. Just got it and have not used it yet; I hope that the learning curve is not that steep!
I love youre videos . I have the breville barista express paired with eureka specialita grinder i love it my eureka specialita has trully changed my espresso game .
Thanks for watching!
What about the Gaggia with PID and flow control pared with Mazzer major moddded for single dosing? Under $1000 if you buy them used
Great thoughts! I didn't include modded or used equipment here. Otherwise a great option!
My setup is all over the place: Flair classic with the Commandate Handgrinder for nerding around plus a Breville Barista and a cheapo electric grinder for the daily quick coffees. The Baratza Sette is on the list for Xmas gifts to myself.
I am having fun with my cheap Flair manual lever machine and Vietnamese phin filter both super cheap while I get my Rocket Cellini repaired. Looking for an upgrade but do not want to drop 10k on a machine. Looking at Profitec 800 and Bezerra Strega if I go spring lever or ECM Synchronika, Bezerra Duo Matrix and Lelit Bianca if I stay semi auto. Would love to try out a Dalla Corte Mina.
How is the Eureka Mignon Silenzio bette than the Brew Proor Specialita or Crono? How about Eureka Helios 65 or 80?
Kyle would love to see an espresso comparison video featuring local cafes or Starbucks/dunkin type locations. Great content my friend !
Great idea! Thanks for watching.
btw. Doesn’t the Breville Dual Boiler offer more than Linea Mini? besides the looks, longevity and steam power
It sure does! And I mentioned that it lacks some of the tech. But the LM makes up for build quality where the breville falls short.
Coffee crema is hard to make and impossible to replace. Milk foam is easy. You don't even need that electric thingies, you can make it in any jar coktail shaker-style
Not the same as with steam, but neither is with those blender style devices
Also if you use RO filter water I dont think there will be any limestain so doesn't that make Third Wave Water useless?
I can't afford a niche zero else that would be my pick. I went with a ROK gc grinder and I saving up for a flair 58
bad advice..., at the 1500/1800 mark you should get a dual boil with a Faema E61 group like a Bezerra Magica and a decent grinder such as Eureka Mignon, with that you have 4.9/5 already semi professional
My intro setup was great. Sage babycino plus, the auto milk frothing was fantastic. Paired with the lelit fred grinder.
Before moving onto a bianca and niche when I was ready to up my game.
I bought a Gaggia and a Sette 270 and I'm still struggling with the Gaggia. I always end up with a sour taste and the shots are really inconsistent. I'll have my grind size set for one shot and it will work fine and the next shot will come out either really slowly or way to fast. Seems to be related with the machine pushing with too much pressure. I would love a Bianca though. But for the moment I'm enjoying filter coffees (V60, Clever Dripper, Aeropress, Chemex, etc).
I hope you resolved the issue by now, but if not, am thinking you might want to add PID, flow control, and the nine bar spring to your Classic Pro. The nine bar spring would provide nine bars at the group head, and it's relatively easy to install. As for the rest of the mods, they are more involved. Also, make sure the coffee you purchase is specifically for espresso. Any others would potentially provide a sour taste in my experience.
Rancillio has a reputation for poor temperature stability for the money. The Breville is not a prosumer machine. It's an appliance made in China. If you get 5 years out of one you'd be doing very well. Agree on the Lelit. The Decent is the machine for those who believe to get excellent coffee you must sacrifice convenience. Linea Mini makes lovely coffee, but for the money I'd want to have flow control and/or volumetric dosing. Lovely tasting offee though. I'm surprised you didn't consider the Crem One or ECM/Profitec range.
My first "espresso setup" was the wacacao nanopresso and a random no brand hand grinder from costplus world market lol. i would use a power drill to grind my coffee😂 now i have the gaggia classic and Ceado E5P and i love the combo. May upgrade to another brewer in a few years
You may want to include La Spaziale Vivaldi plumbed in machine. Have tested shots pulled against a Linea Mini and no difference to me. Plus has programmable volumetric dosing as well as electronic programmable temp and front panel temp leds. Twin boiler, rotary pump Commercial power steam.Workhorse, super reliable more than enough for home use and many are used in small cafes. Famous made in Italy brand full on commercial machines in use throughout the world. I have zero commercial interest in LS but have owned one for many years. Half the price of the Linea Mini. La Marzocco gained ,uch notoriety as Starbucks used them mainly for their steaming ability before dropping them for superauto machines. Starbucks in no way should be used as an espresso yardstick.
Great video Kyle. I currently have the Breville Dual Boiler paired with Ceado E37J grinder. Love it so far!
Great video. I am wanting to get into proper espressos now. Quality of the espresso is #1 priority, then also the quality of the machine. No budget. I don't mind a couple steps, but I do not see myself getting to into the science with a very manual machine. What would you recommend for best match for me? Thank you
I've been using Flair Neo + Bottomless portafilter and the Baratza Sette 30. If you don't want to deal with manual grinding, I don't think you can get better bang for the buck.
Thanks for the video!
Is the difference in espresso quality between the Breville Bambino and the Gaggia Classic such that the average person would be able to tell the difference?
For sure you can hear the difference. My Gaggia is way more quiet than my Breville.
Bambino comes with a pressurized baskets, which give noticeable inferior results, but you can upgrade to something like IMS (around $15-20). it also offers smaller space for heating cups up, which is very convenient (heating, not smaller space). 58mm group for Gaggia is also a nice addition, as most accessories are made with 58mm groups in mind.
Gaggia in the US might be more expensive than in Europe, so keep that in mind. in Poland, where I live, the Bambino Plus is roughly around the price of Gaggia Classic, so I would probably consider them in the same bracket.
Some also put into question the thermal stability of a Thermoblock system (called ThermoJet in Bambino), but that need some looking into.
You also would have to consider serviceability. I know there are a lot of threads on forums about fixing Gaggia Classic's problems, but I don't know about Bambino.
@@yandeslongchamps Thanks, can you easily taste a difference?
@@Narezaath Thank you
Sage/breville barista pro is the best under 700 quid.
I would featured the 9barista somewhere in there. It's a different setup but an option to consider if only pulling 1 shot. I'd be curious to hear your views on it.
What should I choose between flair pro 2 vs gaggia classic pro?
I don't mean to nitpick but where the scales at? Or puck prep gear and tampers? Bottomless portafilters?
holy moly do i wish i could afford one of these beauties
living vicariously thru you
For the $2k budget, I think you should include the Lelit Elizabeth. For being a dual boiler with PID and great build quality, not sure what else competes for the dollars.
Great option for sure! I opted for the Breville here to make room for a great grinder in the 270 to fit under $2000. But the Elizabeth is definitely fantastic.
My goal set up is the Bezzera Duo MN with the Weberworkshop Key grinder. I would love to save up for the Victoria Arduino Eagle One Prima instead, but that would cost more than the set up I mentioned plus no grinder..so maybe sometime in the future that'll be my end game upgrade
No mention of the Rancilio Pro or the Pro X. Why?
You forgot Della Corte studio. What’s your thoughts on this?
I paired my Gaggia Classic Pro with DF64 grinder. Works great!
Great pair! Thanks for sharing!
Proud owner of a used Rancilio Silvia & Niche Zero! It's a great combo. I was struggling with an old Rancilio Rocky grinder until I upgraded to the Niche and my shots improved immensely. The Silvia is built like a tank so they make great 2nd hand bargains. And I love the 58mm portafilter because I can use VST baskets with it.
Thanks for sharing!
I’ve just picked up a Silvia v5 in basically perfect condition for £220 ($300), absolute steal. Waiting for Niche to restock in June and I’ll have my first setup for a very reasonable price
Kinda surprised you didn't pair the flair 58 with a Kinu M47... Speaking of which is this pair any good?
Quickmill Silvano was my first machine that could steam milk and brew coffee at the same time, it's a bit of a unique one since it's not quite a dual boiler it has brew boiler, and a thermoblock but has an extra vibratory pump so it can do both at the same time, which I probably utilized all but like 5x in the 10 years I used it :D Funny how having a machine that can do both was such a priority for me when i was shopping for a machine. Lasted 10+ years with basically no maintenance (before I upgraded and re-sold it), so I was pretty happy with it.
hey I know this comes late, but what's the price bracket for diminishing returns? tia
Lightly modded Gaggia Classic (OG) + Specialita kicks most of my local cafe's butts for pure espresso, no questions, bit it IS a gamble on temperature between a good shot and perfetto.
I'm at the point where the gaggia could be replaced and I'm thinking mara X Vs Rancilio Silvia X pro .
Does the Bianca make my decision redundant , ie just save up a bit longer lol
Without the pain in the a$$ of the workflow of manual espresso machines, the Signatur do more by they own even better than the gaggia classic pro (stock), you could control water temp (but it's not like ride a bike), the pressure aka Lance: flow , preinfusion etc... If you made some mods to the gaggia, you could possibly do more, but it's a super cheap way to enter in the espresso world and understand all the variables that an espresso have.
Do you have any videos that go nuts with the tech? Im an engineer and id honestly love to know how it all works down to the fundamentals (and maybe build my own machine while im at it)
Hello Kyle ! Thanks for the video...Quick question : I can not decide between the sage barista express vs the kit Gaggia Pro + Eureka grinder...what would you recommend and why ? Both in the same budget in my country :)
Really can't decide on my go to setup...
Sage / Breville Oracle Touch or maybe the Dual Boiler with a decent grinder (maybe Sette 270WI). Really like that automatic milk thing, profiles and stuff from the Oracle Touch, but the dual boiler has more options for customizing. Also the integrated grinder and missing configuration for the amount of ground coffee might give me a headache because you might end up buying another grinder.
Switched to an Aeropress with hand grinder (1Zpresso Q2) last year or sth after coming from different fully automatic machines and being sick of those hygienic problems that arise after time with all the damp coffee ground getting every in the machines.
This really gives me headaches, a lot of pro and cons and €€€ / $$$ 😅
What about the DeLonghi La Specialista Prestigio instead of the Breville Barista pro?
First off, awesome vid Kyle!! I was hoping you would do a follow up to the coffee kits setup video :)! Keep these up, they are my favorites.
My setup is also 850 bucks! I've got a Gaggia Classic Pro with a DF64. They're both all white and I'm absolutely in love with it and the espresso it produces. Just wanted to say hello from a big fan from the Netherlands
Thank you! Much appreciated!
Sad the nomad was not on the 250 range, is portable and is awesome.
So, having very good grinder (manual, gues which one) Gaggia Classic is the best choice for the "ordinary" people?
I'd say the GCP with a great grinder is fantastic
Nice vid Kyle, as always
Thanks for watching!
I would choose Decent DE-1 paired with Ditting 804 Lab Sweet, but for now I have 1zpresso jx-pro and leverpresso.
Thanks for sharing!
My setup!!
I honestly think the Quick Mill Anita or the Bezzera BZ13 both deserved to be on here paired with a DF64 or a Baratza for the around 2 grand price. Hardly anyone makes an affordable heat exchanger machine these days the value for the money both of those offer especially with the Quick Mill getting into a full feature E61 Italian built machine for under 2k (love my quick Mill) and the Bezzera being NSF rated perfect for a small catering business, or a small gallery and an optional programable model very difficult to overlook. I think if you do a reboot you should considering adding one or both of those to the list.
Thoughts on new dual boiler Rancillio Silvia Pro x?
That's how second hand market for GCP is created, just suggest paring it with affordable hand grinder and voila, 2 months after publishing you're getting a crowd of happy used GCP owners.
Hard to beat!
What about the Lelit Bianca with the Ceado E37J?
I'd like you to talk about spring lever machines like the Olympia cremina SL or the profitec pro80p or bezerra strega
Dude great video I want to upgrade my machine so thanks for the overall heads up. I have the bambino and got the silenzio from watching one of your videos, now it's time to upgrade the machine. Keep them coming.
Glad I could help
Eureka lineup of grinder? Especially the manuale which is the same as silenzio without the timer and silent technology
Hey Bud, my wife and I are opening a coffee trailer, what espresso machine would you recommend? We want to keep a tight budget as we starting? We have the Breville Barista pro. Wondering if that's enough or should we one of the ones in this video!