Floor Scrubber Maintenance: Tips to Extend the Life of Your Machine

Поделиться
HTML-код
  • Опубликовано: 16 июл 2024
  • Regular auto floor scrubber maintenance is critical to longer machine life and optimal cleaning performance.
    Follow the maintenance tips in this article before and after each use to reduce machine damage, lower the cost of repairs, and help extend the life of your machine. www.ebpsupply.com/blog/floor-...
    To Schedule Service, visit - www.ebpsupply.com/service

Комментарии • 7

  • @zdiddy987
    @zdiddy987 7 месяцев назад +1

    Nice overview that I can show my staff, thank you

  • @JohnYegres-ii8ts
    @JohnYegres-ii8ts 10 дней назад

    soy tecnico electronico especilista en maquinarias fregadoras de piso

  • @ufukalpaslan6605
    @ufukalpaslan6605 3 года назад +1

    Hi,thanks for the information.I d like to ask you my scrubber cuts power and then regains power when i ride to clean.So when i start to roll,it goes normally for a while and than it starts to cut power and suddenly regains power and goes on and same thing over and over.Do you have an idea about what could be the problem?

  • @realbillyvuitton3432
    @realbillyvuitton3432 2 года назад

    I'm having a problem with a upstruction in the suction hose, ???

  • @Stenuarts5287
    @Stenuarts5287 Год назад

    Having issues in our mall...leaves streak marks. It hasn't in the past. Any ideas??

  • @AvnerRosenstein-ULTRA-LXV
    @AvnerRosenstein-ULTRA-LXV 3 года назад +1

    what would be the problem when the clean water gets down to a certain point and then the flow isn't as good? I have a Tennant machine that has good flow for half of the clean water and then when about halfway maybe a little more and then only a little water comes out.

    • @ImperialDade
      @ImperialDade  3 года назад

      Thank you for viewing our content. Check out our video on Troubleshooting common Autoscrubber Problems - ruclips.net/video/qBYQ68gBU5k/видео.html
      It could possibly be your filter, maybe something else. If you still cannot pinpoint the problem after that, our tecs would be happy to look at your machine if you're in our area. visit this link to schedule an appointment: www.ebpsupply.com/service