DeWALT Tool Accessories Will CHANGE the Way You WORK!
HTML-код
- Опубликовано: 23 дек 2022
- Four new DeWALT Tool Accessories that Will CHANGE the Way You WORK! Doesn't matter if you're a plumber, contractor, handyman, homeowner or DIY these new tool accessories from DeWALT will change the way the construction industry approaches these types of work. Below is a comprehensive list of the attachments and which impact drivers work with them.
DEWALT IMPACT CONNECT Copper Pipe Cutter Attachment (DWACPRIR)
DEWALT IMPACT CONNECT PVC/PEX Pipe Cutter Attachment (DWAPVCIR)
‡Optimized for the following impact drivers (sold separately): DEWALT® - DCF787, DCF809, DCF840, DCF850, DCF885, DCF887, DCF888
COMPATIBLE WITH: CRAFTSMAN® - CMCF810, CMCF820 BOSCH® - 25618, IDH182, GDX18V-1800C FLEX® - 1351, FX1371A KOBALT® - K18ID-16A MAKITA® - LXDT01, LXDT08, XDT11, XDT13, XDT14, XDT15, XDT16, XDT18 METABO® - WH18DBDL2, WH18DDX MILWAUKEE® - 2653-20, 2656-20, 2760-20, 2850-20, 2853-20. CRAFTSMAN and LENOX are registered trademarks of Stanley Black & Decker, Inc. BOSCH, FLEX, KOBALT, MAKITA, METABO, and MILWAUKEE are registered trademarks of Robert Bosch GmbH, Flex-Elektrowerkzeuge GmbH, LF, LLC, Makita Corp., Metabowerke GmbH, and Milwaukee Electric Tool Corp., respectively, none of which has endorsed or approved this product or its statement of compatibility
FLEXTORQ® Square Drive Modular Right Angle Attachments 1/4" (DWAMRA14FT)
FLEXTORQ® Square Drive Modular Right Angle Attachments 3/8" (DWAMRA38FT)
Join this channel to get access to perks:
/ @vcgconstruction Хобби
Merry Christmas everyone.
Merry Christmas Billy!
Milwaukee PVC shears are my go to. Very lightweight and much simpler than an attachment
Hello Vince and VCG Gang Merry Christmas to ALL
Hello Nicholas!
SUPER Pumped for these!!!
Real NassLike!
Go Vince!
Real Nass Like Redd!
Thx for the info! Merry Christmas 🎄 & god bless
I can see using the tubing cutter on an old DeWalt driver, that I replaced with a newer Milwaukee driver. I have a feeling that many of us are getting to the point where we have old drivers laying around, and these accessories could bring life back into them.
right? I have a brushed M18 and recently upgraded to a Fuel, i could buy these, use the old impact, save like $100 on the tools plus not having to invest in M12
Hello again Vince and Vcg
Thank you for another Great Video 👍 I like the right angle attachment. I can see that working in tight spots. Merry Christmas and Happy New Year's to you and your family's. 😀
r
Merry Christmas
Merry Christmas D
I have 2 of the right-angle DRILL DRIVER attachments and they are great to have in those odd spaces. I have used them for auger bits and wood drilling and getting those SPAX (interior) screws and star-drive exterior screws out of weird spaces. I need to get a pipe cutter attachment as I am a DIYer and have not gotten a dedicated pipe cutter tool for those "once-every-2-weeks" jobs. Thank you, Vince and the VCG Crew for these videos. You all do a great job.
Reminds me of the matrix attachments that Black & Decker once had jus like the bolt on by craftsman
Yes it is exelent mechanic hand tools and yes i would glad to use it
Exactly
nice attachments
Real Nass like Chris!
I have ended up with multiple impacts... perfect addition for me
Happy new year to the vcg congrats.
Happy new year to you and yours
High Vince I’ve asked you in previous comments,do you think Dewalt or Stanley Black & Decker craftsman would be coming out with the max access auto ratchet ever again ? used to be on the 19.2 C3 line?
I have three drivers in the trailer for decks etc. But no power pvc cutter. So makes sense to use one for this on the days I have a job of these types.
I mean who doesn't have 7 Dewalt impacts already 😂
Nice
This is great
I agree! What do you think of the regeneration charging?
I don't need them, but I will buy them.
Merry Christmas guys, I do HVAC, Plumbing, Electrical, some construction work, and more, In my humble opinion I dislike these new tools I would prefer stand alone tools compared to owning a bunch of attachments that will slow down my job having to swap attachments every time I need to zip a screw or cut a pipe I think these are DIY level tools for the homeowner with projects again just my two pennies
Fair enough and we appreciate the input
Merry Christmas Vince to you and your family and all the very cool gang! Thank you for everything you do! Keep it up and God Bless!
Vince, have you tried these without using the support structure? Can you just insert them into the driver and hold the cutter well enough for a few cuts?
Good for old men
Good for all man!
If there were a 13mm bolt holding nothing to nothing on that part of the car..... A ratcheting wrench would be my second choice, right after an electric ratchet.
How long does that attachment take to put on versus just grabbing a set of cutters and cutting tool by hand put those two two erase cutting hand tools are going to outrun that when you have to put it together why bother way to go DeWalt Over Sale there you go accompanied trying to sell you something that you really don't have a need when you got the right tool for the job already
Im sorry but them cutting attachments are just a waste of money. Love ur videos
I think a better tool to buy would be a bandsaw and if a tight space is the case thumb cutters will do fine
THIS ISN'T A TOTALLY NEW IDEA, i had a black &decker tool that had a spinning motor handle and you would attach a circ saw , or router or sander attachment to it, but it was almost like a toy
Seems to me that dewalt has lowered there standards,
I sold my house and bought $3000 worth of dewalt tools
Several have been complete duds
The small propane battery heater
The small shop vac
And the little cheap flex neck flash light
And the small battery air compressor
Almost $400 worth of the tools I bought
Broke immediately or within a few months
I have some cheap harbor freight tools that have been used 10× more and are still working
I have some 20 year old craftsman 19.2 that are still working
Seems to me dewalt has out sourced there production of there cheaper tools I don't have a problem with that
But they need to retain quality control and standards
I wish I had listened to my gut and went with milwaukee or hillti
I had black and decker tools when I was a kid and they was better quality
Dewalt is the king
DeWalt is a good brand. But harbor freight tools get the job done for a fraction of the price and only last one job
Harbor freight’s don’t sell these attachments…,.Yet!
Not yet but when they do they will be cheaper and a LOT less quality!
You've finished a job with Hobo Freight Tools!? 📰😂
@@I_Died_2_Weeks_Ago yes actually I have. I even have tools from harbor freight that have lasted multiple jobs. I only buy oscillating blades from harbor freight now because I tested them and they seem to last longer than Milwaukee for 8 dollars less
The impact connect pvc cutter is garbage. Used one for a week before it broke, not even 50 cuts of 1-1/2" and 2"
Sa va peter apres 5 minutes
Nope. If you need this type of tool, do you need a dedicated tool if you don’t need this type of tool, you just need to use the manual tool.
Release date?
You can place a preorder in the video and it ships January 27th
Merry Christmas
Merry Christmas to you and yours!