Ortur Laser Master 3 Tips for Easy Assembly
HTML-код
- Опубликовано: 30 сен 2024
- Diode lasers have made huge advances in the past several years.
Link to Ortur Laser Master 3
Amazon link: reurl.cc/5p8nMV
Official website: gozbx.com/r/jK...
Please consider supporting companies that support this channel (affiliate links)
xTool.com site: store.xtool.co...
Easel: www.inventable...
X-Carve: www.inventable...
CNC4Newbie: cnc4newbie.com...
FOXAlien: www.foxalien.c...
Amazon: Genmitsu PROVerXL 4030 amzn.to/3xPdgMP
STARBOND GLUE: www.starbond.com?rfsn=2376834.ca9c16
15% OFF PROMO CODE pawpawsworkshop15
DEWALLIE.COM: dewallie.com?aff=6
Made the Best.com: www.madethebes...?aff=111
=============================
Support my channel on Patreon: / pawpawsworkshop
Direct donations support my channel: www.paypal.me/...
Comments or questions My email is:
PawPawsWorkShop411@gmail.com
Official Website: www.sainsmart....
Link to Laser: jtechphotonics...
CNC4NEWBIE: cnc4newbie.com
Demon Controller By Designs by Phil:
cnc4newbie.com...
_______________________________________________________________________________________________
AMAZON AFFILIATE LINKS:
As an Amazon affiliate I earn from qualifying purchases. Purchases that you make help to support my channel.
Link to My Amazon Affiliate Store:
www.amazon.com...
Frequently needed supplies:
Sculfun S9 Laser: amzn.to/3KB018p
Genmitsu PROVerXL 4030 amzn.to/3xPdgMP
FOXAlien 4040xe link: www.amazon.com...
Replacement brushes for DeWalt 611 Router: amzn.to/2Sknovz
DeWalt 611 Router: amzn.to/2Sp7H6l
90 degree v-bit: amzn.to/2WspRDf
60 degree v-bit: amzn.to/2sYTK0k
Freud bottom cutting bits: amzn.to/2H30R00
Router Bit Set: Router Bit Set 1/4" Shank: amzn.to/2G4iQDH
Oramask 813 12"x10' Roll amzn.to/2VrrUe5
Oramask 813 12"x20' Roll amzn.to/2ViovxQ
Thanks for sharing real-world real-time insight into some of the particulars of this machine... it was helpful to see beyond what the instruction manual and videos show!😎
You’re welcome. Thanks for watching
Nice video! One question, do you still need to supply an airpump for the air assist to function?
Yes, you need to add your own pump. All you need to do is connect the hose. Everything on the laser is complete
Love your channel, so figured I’d ask you a question on the LM3. Bought about a month ago and nothing but connection issues. Drops jobs constantly. Over 40 emails with tech support. Everything tried doesn’t fix the issue. Have you experienced this at all? Think I’m gonna return it and go with the x-tool
I have not been pleased with it. I’ve only done one video with it and I have moved back to the xTool and Sculpfun
Actually, there is a reason why I don't make assembly videos about Ortur lasers. Ortur provides them both on the USB stick and on their RUclips channel.
Yes, you are correct and still people have problems.
The Ortur installation video is good, but it doesn't have the 'PawPaw' touches of usefulness!!
Okay, I am now convinced that I NEED one of these. The assembly looks so very straightforward .. Thank you for showing just how do-able it is. (Christmas, HURRY UP!)
This Ortur and the xTool D1 Pro are leading the industry in my opinion
I bought a OML3 recently and is this video is by far the best instructional assembly video out there. I wish I watched this one first.
Thank you for showing a BETTER WAY of assembling the Ortur LM3. Good job!
Glad it was helpful! You’re very welcome
Hello Paw Paw. I think I watched one of your videos where you show how to frame your project multiple times in Lightburn with just one click to ensure the file was where you wanted to be without having to click however many times. Can you let me know how?
Thanks for the detailed assembly video. I want to get a rotary for this also. Does the quick connect for the rotary only work for the new V3 rotary or does it also work for the V2? - Thanks
I just received my LM3 this month. And they have included the printed manual now. One piece I don’t understand. Check page 11. They say to not run the cable in the red area. Not sure why, bu there is no way to keep the cable up in the upper area where they want it. On the won end, I can see whay they want to there, based on where the cable comes out the back. The connector doesn’t even fit up on the shelf they want the cable to sit one. Any ideas?
PawPaw thank you, I got one and put together yesterday but you showed me all the features ♡
What software do you use for the ortur ?
I use Lightburn for all my lasers. Thank you for watching.
I'm totally new to laser machines lol
Hoping I can get the mode of this machine , I will get the lightburn software then , thank you!
PAWPAW,do you know if I can laser , sublimation blanks,in this case I have some tumblers blanks I bought specially meant for sublimation.
Sublimation tumblers have a polymeric polyacrylic coat
They been seating there so I want to see if I can .
Thanks for doing this. The other videos are either too quick or not clear to this “old guy” trying new tricks.
Love the diode laser videos they have helped alot but I have question about cnc which for a person with no experience in cnc which machines would you recommend for a beginner could you do a video on it
Thank you very much. If you have no CNC experience then I would suggest getting the largest machine possible based on you budget and space in your shop. The reason is you can also do small projects on a big machine. But it becomes difficult to do a large project on a small machine. Inventables XCarve with easel will get you up and running quickly. After about six years of having this machine I still use it for quick projects and for testing concepts. The FOXAlien VASTO is an excellent small machine and you can put easel software on that as well. The CNC4NEWBIE New Carve is an upgrade to the XCarve. Sooner or later you will outgrow the easel software and you will most likely move to VCarve by Vectric. This is a lot of information. I’m happy to answer any questions that you have to get you started
@@PawPawsWorkShop thank you I'm in the planning stage right now but your help is always appreciated
Again, any questions just ask. I’ll try and help
@@PawPawsWorkShop thank you when I get closer I'll pick your brain right now I just started with an atomstack x7 pro and slowly learning I'm making an enclosure and stand for it it will make it easier r to use I live in an apt right now when I use it it's out and in the way I'm lucky my other half is very tolarent
I love your videos Paw Paw. You do such a good job on them. Having said that. I don't know why you like the idler design so much. The screws that go with the idlers are not long enough to lock into the lock nuts. If you tighten the screw enough to lock into the nut the idler won't turn freely. When you are setting the tension and tighten the tension screw it pushes the idler into a slightly crooked position. I think it's a terrible design.
Interesting, I did not have that problem. I tightened them tight and they still turned freely. I like it for its simplicity and ease of access. The xTool D1 has a better design just not as easy to get to. Thanks for watching
Papa another amazing video 📹 I would if you want to see an assembly video of the Sculfun S30 trying to decide on the two. Thank you for all your help and support and great work. God bless you and your family and our entire RUclips family 👪 ❤️ 🙏 💙 ♥️ 💜 👪
Have you done any norton tiles on the OLM3? If so, what setting are you using? I've just did some at 100/90. On your video on the norton tiles your speed and power were way lower. Please keep up the great video's!!!
Ooooooooo wow.
Yeah, it’s awesome