CFS Fibreglass GRP Roofing Laminate & Topcoat
HTML-код
- Опубликовано: 11 фев 2016
- CFS Fibreglass, basic flat roofing GRP laminate application and topcoat finish.
Featured Products:
General Purpose Resin - goo.gl/dD65DZ
120mm Resin Roller - goo.gl/borLLm
450g Chopped Strand Mat - goo.gl/GQZ64Q
140mm Paddle Roller - goo.gl/qgJj55
Acetone - goo.gl/aPDTr6
Grey Topcoat - goo.gl/EYpIYj
Other supplies and technical advice www.cfsnet.co.uk 
Хобби
I worked in this industry for 6 months in 2019 but had to leave due to poor management. I'm now re-entering the industry and watching this video has helped me recap on everything I was doing. Absolutely fantastic. And I can't wait to get started again. It's a job I enjoy thoroughly.
Good video,better than some Ive seen!
can this be applied to a concrete roof?
This will also work on textured surfaces
Can you put another topcoat on fibreglass roof after a week we run out of paint thank you
How do remove a fiberglass roof to install TPO?
What size of the bubble buster & specifications you were using for lamination?
You didn't say what kind of resin it was. Polyester or, vinyl ester?
Will this work on an aluminum roof?
Howmany qty.resin & catalist added. No cobalt added?
Now do another demonstration preparing and gelling/laminating from a fibreglass mould.
should we mix resin in topcoat?
Can I create an interesting finish on my concrete patio. It’s a suspended concrete patron over my dry basement
What kind of roller do you use for that, can I the ones for paint?
I've noticed that a lot of video posters on youtube don't ever answer questions asked.
Is that fire proof ?? ??
Hello from Belgium, got a question, is it advisable putting another coat of Top Coat every 2 or 3 years, for maintenance?
Can the colour be changed or is it only possible in grey 👍🇬🇬
Would 2 layers give you more protection or just a waste of money..
Personally I would use 2 layers of 450 gram
Can this be applied directly on top of a felt roof?
No..... don’t try and use fibreglass directly onto an old felt roof. Better to take the old felt off.
How many layers of mat would you put on a roof ??
Rick S one
I just done my Garage roof and I only used one layer that good enough
Wow
I have a steel roof
That roller sounds like “redrum”.
I was expecting a bit more technical information. Oh well, I guess I will go elsewhere.
Why is it so important not to have any ‘mat-pattern’ showing
Should of sanded before the top coat.
Laminating resin doesn't cure so you don't need to sand it. The top coat will form a chemical bond with the laminate.
Your work is something wrong. Make sure one coat resin apply on the plywood first dry. Then start lamination. That is very strong. Thank you
God the camera guy is annoying