DYNO TUNING THE BUILT RB30 TURBO -WILL THE JATCO HOLD?
HTML-код
- Опубликовано: 5 окт 2024
- BIG THANKS TO GEORGE FROM PRO FLOW FAB & DYNO
CHECK HIM OUT HERE ---- www.proflowfab...
Items Used IN the Builds You see On This Channel Can Be Purchased from
www.spoolup.com.au
BIG THANK YOU To The Channel Supporters
RACEWORKS
PROFLO FAB & DYNO
PROTEX
MTQ TURBO /GARRETT
T7 DESIGNS
COMPLETE AUTOPAINT SPRINGVALE
BURSON AUTO PARTS SPRINGVALE
I Couldn't Do What I Do Without Their Help.
Below are my past & present builds
*1991 Nissan Pulsar N14 SSS- 118kW not raced
*1996 Nissan Silvia S14 200sx -220kW 13.0@109mph
*1990 Nissan Skyline R32 GTR- 350kW 12.0@118mph
*1996 Nissan Skyline R33 GTR- 520kW 11.0@127mph
*2015 Nissan Pulsar C12 SSS- 200kW 14.0@104mph
*1998 Honda Civic EK sedan K24 TURBO SWAPPED 275kW
*2012 Honda Accord Euro K24 CU2 120kW
*2003 Honda Accord Euro CL9 Racecar 140kW
*1987 Holden VL Commodore Turbo Restoration
*2000 Honda Civic EK D16 N/A SOLD
*1995 Honda Civic EK4 B16A VTEC SOLD
*Toyota SW20 MR2 SOLD
*1990 BMW E30 318 M54B30 SWAP
![OsamaSon - ik what you did last summer [Official Music Video]](http://i.ytimg.com/vi/4DIQDnu3mr4/mqdefault.jpg)
Bloody transmissions, yeah we had all kinds of trouble with the stock trans in the Trolvo. We went overkill with the Turbo 400 but it works perfect now
what goes in the vl for cheap?
@TURBOTRISTO when it comes to transmissions, nothing is cheap. C4/C10 seems to be a popular choice, I know our T400 is bulletproof but neither will be cheap.
when its cold it hooks up and revs out , and flies
Pro flow are kings
they sure are
George your my hero
you are my hero
Nice mate. That fuel pump and wiring upgrade did well. Too bad the trans not keeping up.
ill shoot ya a text tomorrow , theres a couple of small things :)
First video I’ve seen of yours and it was a good one! Can’t wait to get my Rb30et back on the dyno after swapping it into a different car and some other changes!
All the best
Welcome aboard! legend thanks for watching brother, there is a whole series on this build
Love the Barbie Makeup Mirror Dreamhouse lights on the Dyno roof George! Very on trend! 😂
I love it!
Will make an awesome cruiser
it is an awesome cruiser
Looks good
It was
A mate has run high nines with a Jatco in a 240Z, obviously it is modified.
thats awesome man, there are a couple of different kinds of jatco, this one is fairly weak
Bud, I love your content, and while I have commented before many times, none of my comments ever contain any intended hate or disrespect in any way. I had a 1997 EJ8 Civic coupe that I had swapped a D16Z6 VTEC head onto the original JDM D15B 3 Stage VTEC engine block (that originally came with a D16Y7 non-VTEC head on it because the kid that I bought it off of thought that he was getting a deal, but the guy that he bought the engine off of took the D15B head and put it on his D16Y7 block creating a mini-me and put his Y7 head on the D15B block and sold it as a running D15B VTEC engine). The kid rebuilt EVERYTHING in the engine and couldn't figure out why it ran like crap. I gave him $1000 for it with absolutely no rust and I live in the US near Pittsburgh, Pennsylvania, so most older cars (especially Hondas) are completely wrecked or rusted out. I yanked the Y7 head and swapped it for a $150 Z6 head. I drove it for a week or so, ordered a SOHC VTEC partial turbo kit from eBay (63 trim T3/T4 turbo, manifold, downpipe for $450), I bought a set of DSM 440cc injectors, an injector resistor box, a virgin P28 ECU that I socketed and chipped with a Xenocron basemap and kit, an eBay bar and fin intercooler, a piping kit, and I rocked it. I made 257 whp at 12 psi and it was SO much fun. I then swapped in a B18B1 from an Integra with an Integra GSR transmission and it was deadly. That car pulled SO hard with the same eBay turbo (besides a new manifold) and I destroyed modified cars with it. That first B18B1 spun a bearing and I bought a junkyard engine that only had 88,000 miles on it, tore it apart, put NPR rings in it (gapped for boost), new ACL Race main and rod bearings, and I put BC Stage 2 Turbo cams in the head, dual valve springs with titanium retainers, a Skunk2 Street intake manifold, a Skunk2 70mm throttle body, and 660cc Siemens injectors, and my buddy put a road tune on it that put down 412 whp at 15 psi on 93 octane pump gas on a DynoJet dynamometer. I ended up putting fully forged internals in that block with a PR3 CTR head with EVERYTHING from Skunk2 bolted into and to it, and it made 709 whp at 34 psi on a GTS3582 dual ball bearing turbo with a billet compressor wheel. Your Civic builds are what attracted me to your channel, but I love all imports and building cars that most people won't. Thank you Tristan!
Man, I hope you read my novel...I have ADHD really bad, so I tend to ramble on and on.
Wow yes it sure is a novel, yeah I see most usa cars are very rusty it’s really sad we don’t have that problem at all really, it sounds like with a tone of effort and patience you can make a tough street /track car that is heaps of power and it would be scary as hell to drive, also I respond to all comments mate I haven’t seen any from
You that I remember but thanks for watching and keep with it, the car sounds like a blast
George is an amazing tuner and all round good bloke !!! Rip poor tranny lol 😂, beautiful car Tristan, definitely my most favourite build to date !!! 😜👍🇦🇺
thank you mate i put my heart into this one
Tchooo tchoooo choooo 😮 👌
Man i commented on your vid when u first started this build and spoke about the Jatco. Well since then i turbod my r31 and the jatco ..shatco.. mine dont even hold 6psi. So looking for a c4 or maybe even a 4L60. Turbo 350 or 400 are but only a distant dream.
My Jatco actually holds when its cold, I took it for a run last week, and it revs out to 7 and holds 15psi all day, I'm guessing its close to 280kW
Also Thanks for watching
Get a boxxxxxxxx preferably zinger
Got any old jz boxes
@@TURBOTRISTO crunchy loaded
Who cares about the vl! Is that project NO MANG on the hoist with the diff out??? 🤔
Sure is man
Meow
reeeow
pitty about the gearbox slipping, also you are gonna find that exhaust housing a restriction when you wanna turn it up on e85
I Honestly think 250kW in a street VL is probably too much power or at the limit of whats needed/useable , and for general driving the trans doesnt slip at all not even when its hot, being on a dyno creates extra heat and load not normally felt on the road
@@TURBOTRISTO 250 goes ok in a vl, 300kw gets you into 10s in a vl, I probably wouldnt bother with the e85 if you are chasing 250, that would be easy with pump fuel and that exhaust housing, I tuned a vl with a gt35 with the .8 year, 337rwkw was about the safe limit on 98 for that car, went low 10s
@929cosmodude all facts man, we where going to turn it right up to see what it would make, it’s a shame I ran out of coin to put a decent box in it
I made 520kw at the wheels in an rb26 with a 3582 and a 1.06 rear the .82 is smaller yes but not that much
@@TURBOTRISTO good power hey, the .8 would have made more but was on pump fuel, I definitely understand what you mean about gearboxes being expensive, a vl I street tune is in the exact same predicament, but goes good for the budget, has a maxpeedingrod gt30 on it, good luck with the build 👌
i swapped it for an evo recently hahaha on to bigger things, maxpeeding turbos are soso, i have a gt3076r on my k24 it makes 280kw on 12psi on e85 its fine, the exhaust housing is way to small but i dont want too much power in that car, so the restriction helps, the maxpeedingrods con rods are awesome i have them in the rb30 they manufacture manley rods and spool rods, i know a guy in Sydney is running 7s on spool rods aka maxpeedingrods rods, i will put them in my kseries and in my 4g63, but i think the minimum turbo i will use will be a pulsar they are awesome value for money
Oh, you bumped up to 50fps? Neat. I think you should clean your lens, though. Cameras aren't supposed to have astigmatism (lights look like starbursts). Another thing, though. If you want to save some hard drive/SD card space and possibly make editing faster, you can switch your camera to NTSC mode and shoot 30fps. The only thing you have to do it engage "shutter priority" mode to the auto exposure and set/lock your shutter speed manually to 1/50th of a second, otherwise your shop lights will visibly flicker on camera due to your 50hz power line frequency in Australia.
Another general practice to consider is to set the minimum and maximum ISO to 50/100 (whatever's lowest) and roughly 1600 respectively, and set your auto exposure bias to -0.5 or -1.0 so your highlights aren't overblown. Also, if you want to stick with 50fps for personal reasons, you should still do the thing with shutter priority mode and setting/locking your shutter speed manually, but for 50fps do it at 1/60th of a second, This way you get more natural looking motion blur in your footage, as well as increase your low-light capabilities.
You might have to get an ND filter for your camera to shoot outside, though. Do a bit of research on that on your own as far as which ones are good quality, but a simple ND16 should typically be enough for all but the brightest and most searing of conditions. If you buy two, then an ND8(indoors) and an ND32(outdoors) are likely going to be the move. Like I said, do your own research in that regard.
yes sir you are correct