BEST PC Settings for Warzone SEASON 1 Reloaded! (Optimize FPS & Visibility)
HTML-код
- Опубликовано: 28 сен 2024
- Head over to FPS Hub to unlock your PC's FULL POTENTIAL!
Use code "4EYES" for $15 off any order over $100:
www.fpshub.org/
Here's the Best Warzone PC settings to Boost FPS, whilst giving max Visibility and lowest input latency on Urzikstan in Season 1 Reloaded. In this best Warzone settings guide, I'll break down all the Call of Duty Warzone graphics settings and options that players with different setups can choose, dependent on your GPU, monitor and general preference (Visual Fidelity vs Pure FPS). There's no better best Warzone Settings guide to follow right now!
🤜 SUB TO THE CHANNEL
bit.ly/SubToFou...
💥 TWITTER
/ foureyesyt
#WarzoneSeason1Reloaded #WarzoneSettings #WarzonePCSettings
• BEST PC Settings for W...
• BEST PC Settings for W...
Head over to FPS Hub to unlock your PC's FULL POTENTIAL!
Use code "4EYES" for $15 off any order over $100:
www.fpshub.org/
Hi, thanks as always! But now they released FSR3 do you think it’s worth it??? Supposedly “Doubles” fps but what about input delay and visual quality, Have a good day.
hello, in nvidia profile inspector the settings you usually recommend have changed, they are no longer available, do you have a video now or in the future to adress that matter ??? thanks for everything you do for the community !!!
AMF FSR 3.0 Frame Generation is amazing as of Feb 2nd 2024 on the latest AMD Drivers
For those on AMD cards, just make sure you have Anti-Lag turned on inside the Adrenalin Software, but Enable the frame gen in the game.
Whatever FPS your game is capped at in game, Frame gen will almost double that; but because we have Anti-lag turned on from before, that hit in latency from AMD FSR 3.0 Frame Gen is minimal.
Cheers everyone!
Thank you!! I’m new to PC and it helped improve my FPS from 65 to 140+
Thank you! I watched about 2 hours worth of "the best settings" videos with no luck. Found your video and have not lagged or stuttered once.
You'd think a video like this would be for those with a below average pc. Seems like this is geared for people who already get high frames to go even higher.
Would be awesome if you made a video for those struggling to get good frames
Bro I appreciate you I’m not gone lie I was randomly searching through settings videos and just watched your full video … and man I must say your a wizard lol my aim is 100% better thanks to you
Not only does frane generation introduce a ton of latency, it also introduces stutter and also just looks jittery.
a 300fps cap without frame generation looks smoother than 300+fps with frame generation
This is old video? AMD FSR 2.1 has been replaced in this update by 3.0 version. Would like to know if this is any better, worse, same as 2.1? Probably should actually play the game before chucking a video out
Copied all steps exact. But the f12 button to get 120 did not work lol what did i miss?
So after doing all this, when I first reboot the game my shaders pre loading stuck at 0%. Is there any fix for this?
It takes a long time, but no longer than 10 minutes
Resizable bar works fine if you dont use custom profiles in the nvidia control or nvidoa profile inspector. If you used custom profiles..say choose cod.exe..You will cause issies with resizable bar if you have the custom profile It disables itself even though tje config file has it set to false. If you want resizable bar on warzone...disable the custom profiles and just have nvidias set scross the boar. Issue sorted.
Was sitting around 65-110 fps @90fov
Did the mentioned changes
BUT used amd fsr3.0 and frame generation
And getting 175-200+ fps @ 120fov
Also seems my packet loss and extrapolation issues may be reduced or gone but ill need to play a couple dozen games to see
Should also mention I'm on a ryzen 5600x with a Rx 580 8gb and 64 GB ram fully overclocked.
(Upgrading soon to a 5800x3D and 7800xt)
I was sitting 110 avg at fps. I notices turning only FSR boosted my fps by 10/20 though hell broke loose when I enabled AMD Frame Generation now I am getting 250+ constant. I did not that Frame generation option does cause some images to look a bit off though I feel getting 100 fps boost is the best deal I can get.
@@karma5319same here. 90-120 but typically in the 110 range. turned it on and it got to over 300 frames and my game crashed. i have my fps capped at 165 too and it went that high. but my game was crashing on fidelity cas (which is what i normally run) as well so i think it’s just the game and the update.
@@karma5319 only real big difference i have seen in the 3 hours gaming since my original comment is grass looks absolutely horrible and trees from afar are jagged asides from that anything nearby looks fine player models look fine no weird ghosting or screen tearing.
@@titantech6328 Agreed.
@@karma5319 those extra frames are the cause of excesive latency problem. It's fake frames.
See you upgraded GPU! Just wondering why you didn't wait on the 50 series? Had a 3090 ti didn't you
Would you recommend these settings for ranked as well? If not can you make a dedicated video for ranked play?
20k views and supposedly only 500 of u guys r subbed to this ch. That’s crazy numbers
does removing the blood effects in the .ini files remove dismemberment effects? because i haven't had those effects since i did this.
Love the guides Dave, absolute class and clean editing!
my PR on resurgence was 15.. first game after i used these settings got 18 kills xd #already BIG thanks!
Fantastically made video man, thanks!
wait so if i have 16 cores ND 24 THREADS AND 8 OF THOSE 16 CORES ARE PREFORMANCE CORES AND THE OTHER 8 ARE EFFICIENCY CORES DO I USE 8 OR 16 IN THAT NUMBER
Crazy to me that you mentioned Path Tracing again, but AGAIN failed to mention that it only affects the main menu and shooting range... It literally does not affect your in-game performance, because it's not even on during gameplay. It's not a hard thing to clarify. Just do it. Path Tracing will probably be introduced in the next Call of Duty release; and this is simply them testing it out beforehand. A bit odd, but there you have it. It does look INCREDIBLE though.
Since i try setting up all this, my game always reset all my settings to default when i restart... any help?
They've added FSR 3.0 with frame generation. That's the one to use
FYI I'm seeing AMD FSR 3.0 (instead of 2.1) as an Upscaling/Sharpening option with today's update!
Is there Frame Generation option?
that's because this upload is based on an old version
FSR 3.0 is good if you need more performance, just make sure you disable frame generation. Try balanced or performance presets.
@@pjetreg yes
Legend! Thank you 💪🏻💯
Is there another word for "cores" i cant seem to find "physical cores" for my GPU
Thank you so much for the updated video! I watch everyone of your optimizations. I do have a question for you, I have a 4090 with a Ryzen 9 7950x3d what should I set my renderer worker count to in the config file? Also are there any settings you would adjust with my above specs? Thank you again appreciate all you do!
Hi mate. Before update I setup 8 , after update recommend 16 because if is 8 I see different input lag on my controller. I have the same build.
Might have try out the optimization. Ive got a 4080 i7 12700KF and i can get 250fps but i feel like i could get it closer to 300
have gone through all the steps. but now when I start warzone my laptop crashes. what am I doing wrong? Help!!!
Beauty mate this helped heaps, I'm getting around 180-200 fps but it doesn't feel very smooth, it feels like maybe 100, Anyone have a fix for this?
Bro... I was using your settings and was able to play perfectly on my HP Gaming Laptop (GTX1650, 16gb RAM, Intel Core i5), and now since a couple of day I cannot get more than 45fps on average, sometimes dropping below 30, it is unbearable... please help me fix this!!!!
Respectfully man, i would have waited to post this video. Today was an atrocious day for the warzone/COD community 😔
indeed...
Literally makes no difference. This is an evergreen video for the entire season. No reason to wait.
Just a heads up on AMD Frame Gen is available on FSR3.0
They have added fsr 3 with frame gen i literally doubled my fps check it out four eyes !!
My fps also increases a lot with fsr3, however it is strange because I feel lag and tearing.. with fsr1 I have less fps but it feels smoother, idk why. I can't find information about it.
@lain-nz4sn because framegen increases input latency
Do NOT use framegen. Will ruin your latency
How did you know about fov affecting aim assist? Not seen anything on this, would like to find out
Probably trial and error
@FourEyes Hi bro.. thank you for the video.. i have 1070ti 8gb VRAM 16gb RAM.. which VRAM SCALE should i put playing while streaming with OBS to not have any problems.. maybe 70% ? i get 100 fps only gaming and 80 fps gaming + streaming
The game on high texture settings uses 13.6 gb of vram, just saying
@@End0fst0ryno it doesn't lol max higbia lole 5000 6000 Mbs 5 6 gbs. In old gpus max the vram scale out. Because of the bandwidth memeory ect
@@End0fst0ryon 4k it may use 13gb lol 1080p and 1440p nahhhhhh
Thank you
My pc froze up on these setting what do I need to do
Ive always used your videos for Battlenet Call of Duty, but I have a question about Steam Call of Duty. No matter what I do I always have blocky pixelated video in game. The ONLY way I have figured out how to fix it at the beginning of each match is to switch it Extreme graphics & back to Ultra. But when & if I go into Gulag, I have to do the same thing again & then again when I come out of Gulag.
Bueller, Bueller, Bueller...
i dont see fullscreen exclusive can u help me someone?
If you have an AMD GPU, use FSR 3.0 in the Upscaling/Sharpening with AMD Frame Generation turned on. It quite literally doubled my performance with the RX 6650 XT.
Doubled performance and latency, yeah
@@End0fst0ry that's so nice. It doesn't work on my 2060 that good as on AMD. Have a 50% FPS increase on vondel and ashika (but not constantly) and no increase on urzikstan 😢
I dont have full screen exclusive
Hey mate i use on lm mode in game and off in nvidia custom games and ultra in control panel is it ok?
how do i put my settings in config back to original
Do u noticed that the "eco mode preset" will always reset to efficiency everytime we start the game??never it will stay at custom
You need to change V-sync menus to off (or a setting in that list) which is what defaults it back to ECO.
You can play in 3rd person view in Zombies
thx to you
Its weird, on my compter I dont have some of these setings in warzone...
Is your driver up to date ?
Yes, it said I have the most recent version.
How do i know if my pc is cpu bound
I switched all my setting to this bc I was having issues and figured there were new setting, for the new season. These settings unfortunately made it worse for me. 50fps... not sure what to do, my game was fine when I first got on and now, I am getting 50-60fps...Hoping for some advice.
CPU bound, probably
Please help!!! Graphics still won’t save
I have gp 2070 super and i DId all step on u video but i still get 100 to 120 fps and i have 165 Hz monitor. Why is that ??
did u played on 1440p? Then its normal fps for your gpu.
my game looks really bad and i cant hear nothing
Seems very same to last video nothing much changed then?
there is no players in my cod file
So you have been in and retested all settings and configs whilst the game is broken. Or you have pre recorded and guessed 😂 please don’t say something like, “I’m so experienced I already know what’s best” without actual facts, benchmarks.
I do know whats best. Thats why many people recommend me as the place to go for settings, as oppose to dumbasses recommending Frame Gen, Unlimited frame rates, low everything, Vram Scale 90. Do i need to keeping listing?
@@FourEyesGames some of the best settings for this game are in the windows mouse settings and mouse software especially if your a amd user. No more lows or stutters.
Can you tell me this seetings i am an amd user @@sambryant2283
Heych DR
😅
my games looks like shit but the fps is still the same😭😭😭
Same!
😮
Man…wow imma be real i love your content but im 5 min in and its all stuff youve made videos on previously, this feels like clickbait i cant sit here & finish it theres not even video chapters
I make an updated video every single Season/Reloaded update, because people return to yhe game and want to watch a recent updated video. Yes, its never gonna be completely different, and a tonne of it will match, but its still useful for people. If its not applicable to you, then just dont watch it?
@@FourEyesGames It is applicable, if new. If possible, could you state if anything has changed since the last video? Or even a “jump to this time for new changes” thatd be dope.
All warzone optimization videos are useless coming from someoen wirh high end specs half the shit u say dont do anything
Waffle
made them worse 👎🏿
bro i loved ur vids ,but this vid was recorded b4 the update u don't have what we're looking for
Since you made this video cod have updated FSR to FSR 3 with the option for Frame Generation
REPLY!!! I'm also curious about this, I haven't noticed any jumps in latency. Definitely a good video. Subbing Fam
I’d honestly settle for being able to play with friends can’t update up weapons screen keeps flicking to fetching profile and joining game session and can’t get my loadout from the game without it freezing and sounding like an indicator
same here. so annoying!
The games broken so how are these settings correct?
found you from reddit. after update the game was a snail. this fixed it. much respect mate!
Warzone crash
Foureyes best settings
btw ur display resolution if u put that lower u get more fps dont listen to him automatic makes fps lower
You said you were going to show us a better way to downscale our resolution that wasn’t in the game menu? Edit: this actually helped so much that I can play the game in 1440p now!!!
he only helps those with high tier pc not for us who doesnt hace the cash for that i have someone who i watch and he is much better
The FSR (now version 3.0 in-game) does just that. It is rendering the game at a lower resolution, then upscaling to your monitor's display resolution using advanced techniques. It is recommended to set the preset to balanced or performance, then turn off frame generation.
@@Beardfish. idk why but I’m getting way better performance with FSR1.0
I got a 4070 and I run fidelityfxcas at 70 with DLSS frame generation on and my latency is great, so I’m not sure what you mean by bad latency cause I’m not seeing that at all
Setting are outdated. Theres no fsr3.0. Lazy content creator
My in-game graphic settings and config files keep resetting. I have tried putting the options.4.cod23 file in read only and it still resets? Help please! 😞
My screen refresh rate is 60 smh
Love the settings but when you do the whole changing stuff in note pad it crashes the game every so often
I have a very good FPS both Resurgence and Battle Royale when I am also streaming, I have never had this performance before! Cheers mate!
No way my 4080 laptop getting more frames than your 3090.. I’m at 1600p and same settings
New to PC, scared the life out of me going in changing settings in config. Cheers though, followed everything. Now to test !
I cant do it 😅 I prefer cranking the settings up, and using AMD Adrenalin to lock the FPS with chill and get sub 4ms latency, I like the immersion and look.
If you want to be competitive and max the FPS out with these settings for sure.
Have to comment here. My rig rocks a 5700G and a RX6700XT w/16 vb RAM. without this settings I was having 90/110 FPS and after this I’m achieving 140+ even 160. THANK YOU❤️❤️❤️❤️❤️
Very good video honestly. However im now on 250 fps but my monitor is 160hz , wonder which one of those i could turn up, since the game frankly looks like shit on this settings
Good afternoon. I am a subscriber and I come to you after every new update. Favour ... can you just run through the optimal settings without explaining them? I've heard why I should and shouldn't have certain things on or off and high or low so many times I trust you. Just low - off - very low - high ... etc
Hey you know at 23:29 if I put the wrong number in by mistake because I’m terrible with knowing anything about my pc, would it cause the game to crash and make my pc restart? Thanks
Not sure if it's just my CPU (I7 9700k), but when I set my render worker count to exactly half of my cores (4), I get nearly 30 more fps.
did you record the video before the reload season came out? FSR3 is not in the settings, how can you talk about the settings if you don't know how they behave in the new season?
yo, thanks for your videos, im a new fan
Are it so for the render worker count for cores? There's a debate with an AMD CPU for you to use half your cores. Have you heard about that? Community?
My PC ryzen 5 3500 gpu rtx 2060 super, ill try tutorial on yt but still very lag and the build is crush when i play
Went from avg 97fps to 133 with these settings! Awesome! Thank you
I did everything exactly as you said on my gaming laptop and I only got about 15 fps more but the graphics now look terrible.
shitty gaming laptop😂, i got a 3060, 16gb ram, ryzen 5 5500, get about 180fps
@jesus_wtss rtx 3050 ryzen 5 6600H 32gb (2x16) ddr5 4800 and ssd. So not shitty at all my friend. I actually changed the settings a bit to get better graphics and I am still getting the same fps so...
@@ΣτεφανοςΚεχαγιας-η2ε rtx 3050 is a bit shitty tbh
After making changes as per you. I start getting DirectX Error every time I start the game.
You’re great but I wish you would’ve made this video when fsr 3.0 came out
I’ve noticed much smoother game with variable rate shading OFF
Bro just earned a Sub went from 120 to 144 thanks my guy 💪🏽
I'd be lucky if i could load inro resurgence. Game gets stuck in a loop.
youll get better and more consistent fps using w11 23h2.
Amazing video thankyou
You obviously know what you’re talking about. 👍
helped me out so far, been having problems for last week and so far 3 clean games on PC with improved Frame ! THX