JEEP WRANGLER JL INTERIOR MODS | 67 Designs Rail & Mounts
HTML-код
- Опубликовано: 5 июл 2024
- I love to keep my Jeep's cabin organized and devices secured. In this video we go through adding 67 Designs mounts to my JCR over head rack to hold some of my communications devices.
67 Designs - www.67d.com/Casey250
- Series 55 Rail System: www.67d.com/collections/serie...
- Nano & Small Arm (10mm & 70mm): www.67d.com/collections/arms/...
- Camera Mount: www.67d.com/collections/holde...
- Mag Mount G3: www.67d.com/collections/holde...
Joby Mount - amzn.to/3tVQOzK
Warn Storage Bag - amzn.to/3u3HeLw
Warn Soft Shackles - amzn.to/3qgxISF
Spot GPS- amzn.to/2OAfrlx
Yaesu Radio - amzn.to/3ag022g
JCR Rack - bit.ly/JCR_Overhead_Rack
Rivnut Tool Astro 1442 amzn.to/3p9ln1u
JCR Overhead Rack install video - • JEEP WRANGLER JL OVERH...
Disclaimer - Several products in this video were provided at no cost by 67 Designs. No money was exchanged to make this video. 67 Designs had no input on this video and did not have an opportunity to view this video before it went live. I do receive a small comission from affiliate links provided above that goes toward funding making more awesome content for you guys.
NEW VIDEO EVERY WEEK!
► Subscribe / casey250
► Follow me on Instagram! bit.ly/Casey250_Instagram
► Follow me on Facebook! bit.ly/Casey_250-Facebook
Shirts, Stickers and more - www.dirtyanddangerous.com
Music in this video provided by - www.epidemicsound.com/referra...
#jeepmods #intermods #67designs
=====================================
Check out some of my other Off Road Vlogs:
CRASHED MY JEEP into HIDDEN TREE STUMP
• CRASHED MY DIESEL JEEP...
THESE STUNNING VIEWS WILL MAKE YOU WANT TO OWN A 4x4
• THESE STUNNING VIEWS W...
FINDING A MOUNTAIN OASIS
• FINDING A MOUNTAIN OAS...
WE ALMOST LOST A JEEP OFF THE EDGE!
• WE ALMOST LOST A JEEP ...
Flooded Trails Off Road Adventure
• Massive Storm Floods O...
=====================================
Affiliate Links
=====================================
Dashcam
BlackVue DR900X-2CH Dash Cam - amzn.to/34bMJMI
Phone Mounts on Dash
Rail System - www.67d.com/casey250
Wireless Charging Phone Holder - amzn.to/2JZv5oI
Off-Road Gear I Use
Factor 55 Ultra Hook: amzn.to/3o0fHYn
Warn Wireless Winch Controller: amzn.to/34HznIU
Warn Zeon 12s Winch: amzn.to/3522rd6
Warn Winch Plate: amzn.to/3lRhmgT
Warn Grill Guard Hoop: amzn.to/31awJJd
Warn Reflective Soft Shackles: amzn.to/31gIL3X
Warn Reflective Winch Rope: amzn.to/3596RPa
Warn Recovery Kit: amzn.to/3j2FF9F
ARB Air up / Down Compressor Kit: amzn.to/31c9OgK
Teraflex Nomad Wheels: amzn.to/37jfxW9
Warn Tree Saver: amzn.to/3lUii40
====================================
Business Inquiries: casey250x@gmail.com
====================================
Support the channel by using my Amazon Storefront link to see a list of various off road items I bought and use. I receive a small fee for all purchases made at no cost to you and it really helps support the costs of making these videos.
www.amazon.com/shop/casey_250
==================================== 
Авто/Мото
I ordered some gear to clean up the interior literally an hour before you posted this. I don’t have buyers remorse, but I wish I had seen this video before I bought.
What I ordered was good for me, but now I see how expandable your kit is, I think I’ll be scanning your videos first before I hit “click to buy”.
Thanks again for sharing and keep ‘em coming, Casey!
Thanks. I like to show off ideas that are different and hopefully give you guys ideas on how to do things that aren't exactly what everyone else is doing. Good luck in the I stall of the new parts 👊
I always enjoy your videos and I've incorporated some of your mods and ideas. I'm still working to install some of my communications equip (Which needs to be removable) so this was helpful and timely.
Cool setup.
😆 Fun fact: just figured out how to get to links! Thnx for info on radios.
Nice. Wish their stuff wasn’t so Jeep focused but it is what it is. They make some great stuff.
Gonna be doing some 4runner installs soon with some other gear. Stay tuned.
Nice moods 👍
Great looking setup, still waiting on my 67 Design mounts to come....been over a month :(
Hey Casey. Do they make something like this for the XJ, or would this system work on the XJ's dash? I'm currently using suction cups and 3m stickies and really like how this system you've showcased looks. edit: NM.lol. I hadnt finished watching and misunderstood where you were mounting it. great video anyhow! thanks man!
Just picked up the Mag mount for my Vector bar for my radio through your affiliate link.
Great job, good info!
Glad it was helpful!
I really like your setup! I use some ball mount stuff too and I usually scuff up the balls and sockets a bit then they don’t wander as easy. You have more faith than I do with a vertical flat magnet! Magnetic force isn’t big on shear so I have a $20 on that spot falling off on the trail! Myself I’d modify it with some Neodymium magnets if it absolutely has to stay in that position.
As always brother great work and awesome feng shui in the Jeep, you have a real talent with that stuff!✌🏼
Hasn't fallen off a cheap Amazon mount I've been using and this 67 Designs magnet has a lot more grab. The spot is very light too. It's not going anywhere.
it looks like Spot has found a use for old BlackBerry cases 😆
What kind of communications do you and Sean use are they handheld radios or CB
You have a HAM radio license? Is it hard to get in Canada? Didn't think the FCC had any power up there..?
Ha! I placed an order with 67 Designs 2 days ago for a Magmount G3 and 2 nano arms. I'm removing their "small" arm because it's just too long for my application. If I had known you were going to do this, I would have left the small arm at EPIC for you to pick up at your leisure. I gotta go there anyway for a install job on Wednesday :)
All good - appreciate the offer!
Love my 67 Designs mount, but found they are often low on stock and their shipping rates to Canada are expensive. I found that tackform.com has compatible arms and accessories with cheaper rates.
How do you have the FTM-400XDR wired up from there to the base unit? I'm looking at doing a similar setup with my JCR Headrack but the remote location of the base unit is such that it's hard to hear at times. May need to wire an external speaker up on the JCR Headrack as well, but would be interested to see how you've positioned yours and if it is hard to hear at all. Thanks!
Yep. Base under dash. Remote speaker up top at back of JCR rack. Extensions on mic and speaker. Mic is mounted on roll bar with a mag mount and retractable keeper.
Now that you’ve had the ECO Diesel for a while with the 40’s how is it doing?
37s. Check out my two reviews in December that I up loaded.
I just installed my FTM400 under the passenger seat, was curious where you have yours installed. Are you using an external speaker if installed under seat or concealed elsewhere?
Under the drivers footwell, and yes external speaker and extension cable.
I just placed my order for the 2021 Ford Bronco and have been looking around for ideas to mount the head unit for the FTM400. I like the solution from 67 Designs, I am sure they will be making products for the Bronco too. BTW, where did you mount the radio? In my FJ Cruiser and 4Runner, I had mounted radios under my seat and used an external speaker and a mic extension.
In my footwell above my pedals near the firewall.
@@Casey250 thank you. I am looking forward to getting back in to an off road vehicle. I traded my 4Runner in for a sports car back in 2018 and found myself not being able to pack all of my camping gear in the trunk.
Haha. I hear ya. Off roading is awesome.
That’s a freaking awesome setup!!
It's coming together for sure.
Grow up and stop spewing immature disgusting F-words. If you had not failed vocabulary class you would have found many other intelligent words to use in this place, instead of the same old tired filth used over and over and over and over and over and over and over and over....
What is the cylinder looking thing behind your rear view mirror?
Dash cam.
Hi Casey, did you go with PRP or Bartact seat covers?
It seems that those are PRP, are these better than Bartact as far as function (leaving looks aside)?
Thanks in advance
Neither. Stock seats.
@@Casey250 living on the edge... I see
I do like the PRPs though. The selection of materials is nice for both functionality and esthetics. They are awesome every time I've spoken to them about ideas. I was a set of seats for the JK but I want to try them first.
I like that radio witch one is that?
Yaesu Ftm-400xdr. Link down in description
How often doesn’t the Spot actually get used ? It will be interesting to see how well it does hanging off the magnet when you are out on the trail. Clean looking instal.
My rear-view 7" tablet uses the magnet and it's VERY strong.
I had it hanging off a generic Amazon magnet for 6 months and it's never fallen off, and this g3 mount is twice the size. I use my spot every time I go out. My wife and daughter live track me and I let them know my eta of return when we are heading out.
@@Casey250 that’s awesome. I am having trouble finding something strong enough for my 12 pro max. In sure that 67 design mount will work better than the wish magnets I get 😂
This 67 designs mount has a lot more grab then my old mount I was using.
@@Casey250 I’ll have to order one up
Do you know if that Rail is compatible with Ram track balls ?
I do not. I do know the balls are smaller then ram
How will the magnets interfere with the gps? Or does it at all?
I don't think so.
How tall are you? Do you ever worry about bashing your head on that rack in an accident? I'm 6'6" so it would be a concern for me.
6ft 2in. If I was 6'6" I would for sure.
oo
You should get rid of your Spot satellite, and buy a garmin inreach 66i. With the garmin you can send and receive text messages and emails, also SOS. I love mine and it I think it picks up satellites and sends messages quicker.
I can do all of that.
I guess the new gen 4 you can
I hate suction cups >:(
Do you have the install video of ur FTM-400XDR
I did not.
Thanks for the reply 👍 if you end up making a video to explain how you wired and where I'll definitely be interested. The setup looks clean!
I would also be interested in seeing this. I have a 400 and will be getting a JL in the next couple of months, and I'm looking for suggestions on mounting the body of the radio.
Doesn't this completely block your inside rear view mirror? The driver can see the mirror, but the mirror can't see towards the rear.
Nope, not at all. But I can't see out my rear window much anyways.
Why didn't you just install the ball mount onto the back of the Yaesu - instead of all those various attachments? that would have mounted it up higher and less expensive too.
Different thread rate. This makes the face plate easy to take off as well.
Casey how stoned did you get when installing this!? Lol 😂 jk bro, nice job 👍
Lol. Some days energy is lower then others
That's only like 6000 dollars worth of 67 designs. Not bad
Truth
I like to display what the art of possible is. Maybe one or two of these things will fit your needs but 67 Designs has given me an opportunity to show off what I can do and give you guys ideas and determine if it's worth buying and how you can use their products. This Jeep build is all about premium products and trying different things.
To get Casey_250's Corvette on 47's he needs 100,000 subs
I think I know where the Krazy comes in your username lol
@@Casey250 my friends agree with you.... oh wait, you are one of my friends.. never mind ;)
I like their stuff and this is a good video but man that rail is just about the exact same as accessory rail for a kayak
1st
🥇
I cringed while you were drilling towards the soft top, my luck I would have hit the soft top with the bit.
There is a ton of room above it. More then the bit.
@@Casey250 the deception!! I can never trust the camera again lol
It was pretty much all that was going through my mind as well haha