nice, may do better with front wheel weight. remove tires, wrap 2 mm solder full row between tire beads, stretch electrical tape 3 wraps with a spot of CA glue at end of tape. the stretched tape will keep it tight to the rim. I see motor is forward, electronics and battery too, but a little more up front may help it pull itself up steep inclines easier. in one spot of video, saw rear tires digging down faster deeper than the fronts were doing (about 8:00 mark), at 8:40 mark see the steering "go light" too. 8 wraps fits the Fayee style rims, they have slightly over 16mm width between the tire slots, it helped my WPL C-24 a lot.
Thanks bro. Such a nice explanation. I will take this suggestions for my next brushhless upgrade. And I want you to show this. Please keep subscribed as I really want to show you. One of the best comments.
model nutty what is the weight of the weighter (roughly) on each front wheel to be added? I put about 25 g each, but not sure if it need more, before I put CA glue permanently.
Hi i have bought the mn d99s i have no experience in modification never done..i need to upgrade like this can u help with modification ? where is ur location ?
Ya suspension is something hard to find. The steering horn want much of issue. I didn't reduce the servo angle using dual rate to have that quirky movements.
these: www.ebay.com/itm/A285004-Aluminum-Shock-Absorber-for-RC-1-16-Car-Set-of-4-Black/273444473375?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 the top holes are already there to angle them back a little bit. for steering, wrap metal on front cross tie with long vertical slot for screw in the servo horn, no more bump steer. think it was HobbyDaddy did video how to, it's simple good arrangement.
When installing steering link what screws did you use on left hand HUb and servo and can you send photos as you said on assembly of diff and hubs and linkages
Banggood doesn't have instructions. What doubt do you have? I can may be send few pics for helping you out right now as video will take time. Do you have it right now
Both have essentially same parts. So depends which design you like. But but but. MN models are bigger in size so you will be able customize for better scale looks. This is what I think.
I just received mine, definitely needs upgrading, I ordered the parts, I know it’s a minor thing but what kind of grease are you using? Thanks for the video.
Awesome Video man!! Can I ask some quick questions. Does The upgraded steering servo fit the mn-90 as it's first upgrade? Will there be reconfigurations needed for it to be fitted? My steering box in my rtr has been toast so I'm looking for a servo lol Ty and more power!!!
Hi. Nice Video there. The caption in Banggood for (MN 90 Metal Axles, Driveshaft - 1/12 RC Defender D90) from your link mentioned 1/10 am I right? If it's the excact same product, I intended to buy some for my RC. Thank you. This video is very inspiring.
+Agam Mize hi thanks for the query. I am using 2s lipo. regarding torque I am not sure which is the strongest but let me test out both today and I will update. please like and subscribe for future updates.
I picked up one of these little guys and did a ton of upgrades. It is a good looking little rig but there is just no performance. Save your money and buy an axial or vaterra, whatever just buy something quality or you just wont drive it. It's different when ya have a bunch of rigs, then it's not the end of the world have an MN sitting on the shelf. They look a lot better than they drive
Oh right thanks. I guess they were plastic before. I want to buy this for crawling so i wanna focus on upgrads that get me to that goal like in your video great crawling because a lot of people just go really fast but you didnt so respect there. Id actually want to also put smaller wheel on to make it more to scale those are a little too big im more of a relaxed crawler i like to go on trails etc. Havent been into this hobby for awhile so hence the noobie questions. Anyway great video compared to others who did on this model.
@@michael4218 thanks a lot for your wonderful reply. You can always try fayee or WPL tires for more scale look. Quite actually the tires are not a looker.
370 Power Motor All-metal Gearbox : www.gearbest.com/rc-car-parts/pp_009125127051.html?wid=1433363&lkid=19301819 The cheapest option would be any 180 motor. It will fit into the existing gearbox
nice, may do better with front wheel weight. remove tires, wrap 2 mm solder full row between tire beads, stretch electrical tape 3 wraps with a spot of CA glue at end of tape. the stretched tape will keep it tight to the rim. I see motor is forward, electronics and battery too, but a little more up front may help it pull itself up steep inclines easier. in one spot of video, saw rear tires digging down faster deeper than the fronts were doing (about 8:00 mark), at 8:40 mark see the steering "go light" too. 8 wraps fits the Fayee style rims, they have slightly over 16mm width between the tire slots, it helped my WPL C-24 a lot.
Thanks bro. Such a nice explanation. I will take this suggestions for my next brushhless upgrade. And I want you to show this. Please keep subscribed as I really want to show you.
One of the best comments.
model nutty what is the weight of the weighter (roughly) on each front wheel to be added? I put about 25 g each, but not sure if it need more, before I put CA glue permanently.
I'm about to go through this same upgrade on my MN99S. Very informative, thank you.
Excellent.... good to know the metal axles fit! nice video 👍
+Tomley RC Garage thanks.
That is one clear well shot video. Thanks for the tutorial and a fun running video
Thanks
Hello. congratulations for the video. could you write what kind of grease you put on for transmission? thanks
hey friend i want to know if you need to change the esc and battery to use this motor. Thanks a lot if you can answer my question.
Hi i have bought the mn d99s i have no experience in modification never done..i need to upgrade like this can u help with modification ? where is ur location ?
Did you have to upgrade the esc for the 370 motor?
Hey my friend don’t let this differentials without grease...nice video buddy!!!👍🙋🏻♂️
How did you remove the white plastic gear (to replace it with the metal one) from the bridge cover in the front wheel axle ?
Pulled it bro with tools like pliers or tools
Do you think the 1/16th metal upgrade kit would fit.
Thanks
nice. now just need to upgrade suspension i gues? :D btw new steering horn still impacts suspension when tuurning..?
Ya suspension is something hard to find. The steering horn want much of issue. I didn't reduce the servo angle using dual rate to have that quirky movements.
these: www.ebay.com/itm/A285004-Aluminum-Shock-Absorber-for-RC-1-16-Car-Set-of-4-Black/273444473375?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 the top holes are already there to angle them back a little bit.
for steering, wrap metal on front cross tie with long vertical slot for screw in the servo horn, no more bump steer. think it was HobbyDaddy did video how to, it's simple good arrangement.
When installing steering link what screws did you use on left hand HUb and servo and can you send photos as you said on assembly of diff and hubs and linkages
I have used left hand hub. Sorry for replying late. I hope you read this.
From were did u get all the stickers, which is plassed on that Truck
very very nice video, thank you
Thanks
Did U get instructions from Banggood for metal upgrade or could do step by step instructions video thank for video
Banggood doesn't have instructions. What doubt do you have? I can may be send few pics for helping you out right now as video will take time. Do you have it right now
@@RCWithPopeye that would be handy if you could and very .uch appreciated looking forward to brushless .Ior video keep up the good work
That was a great run 👍
Thank you
Ok Popeye which is worth the money they d90 upgraded or the wpls upgraded
Both have essentially same parts. So depends which design you like. But but but. MN models are bigger in size so you will be able customize for better scale looks. This is what I think.
Thank you so much Popeye your opinion helps with my future rc pick
I just received mine, definitely needs upgrading, I ordered the parts, I know it’s a minor thing but what kind of grease are you using? Thanks for the video.
Just the regular grease which comes free with metal axles and driveshafts
Awesome Video man!!
Can I ask some quick questions.
Does The upgraded steering servo fit the mn-90 as it's first upgrade? Will there be reconfigurations needed for it to be fitted? My steering box in my rtr has been toast so I'm looking for a servo lol Ty and more power!!!
No issues man. You can use the wpl servo easily. I have mentioned the link in description as well.
HUGE THANKS MAN!!! I'VE BEEN SWEATING ABOUT BUYING THIS SERVO A LOT LOL!!! Definitely saved me!
What a beautiful machine
Hi. Nice Video there. The caption in Banggood for (MN 90 Metal Axles, Driveshaft - 1/12 RC Defender D90) from your link mentioned 1/10 am I right?
If it's the excact same product, I intended to buy some for my RC. Thank you. This video is very inspiring.
It's the same product. They have mentioned name as 1/10
@@RCWithPopeye Okay thank you. Waiting for your next video hahaha
Nice trail run👍
Thanks 😊
1/12 size is so cute! I like it! 😁😁😁
Hope you liked and subscribed. Also watched upgraded videos
Great video.Can you be so kind and tell me how I can order those metal axels and parts to Ireland?.Thanks for tips
Banggood or AliExpress. Links in the description
I know it's toy grade but the details are amazing
You have done a great Job my friend, nice build footage, the Rig Looks great and a nice Running video 👍😊👍😁
Thanks bro.
Great upgrades! Can you tell me if the metal gearbox with 370 has more torque than 2 speed transmission? Also are you using 2s or 3s?
+Agam Mize hi thanks for the query. I am using 2s lipo. regarding torque I am not sure which is the strongest but let me test out both today and I will update.
please like and subscribe for future updates.
RC With Popeye Subscribed! Thanks for replying and let me know the result between the two gearbox.
Metal transmission is the strongest vs 2dual motor and 2speed.
Hi I checked at home. The torque for metal is much stronger.
RC With Popeye Thanks for letting me know! Have a great day.
Nice video!!! I also ordered a mn 90 and all metal upgrade, and a 370 motor with a metal box. Waiting for my packages.
Awesome. I hope you subscribed to my channel as well. Brushless mn 90 coming soon.
Hi Buddy,
Would you mind filling a 5 min survey for mini RCs?
goo.gl/forms/9s8PXHDY9jrwFhJ52
Is this standard?
Very nice 👌🏻
Thanks a lot for the video! I was looking for this metal axles. Never knew that Banggood is selling it. Will order it now.
+KH L feeling happy to have helped my viewers.
Max speed motor 370?
Best place for upgrades
Banggood/Ebay. I hv given the links in description.
Hi Buddy,
Would you mind filling a 5 min survey for mini RCs?
goo.gl/forms/9s8PXHDY9jrwFhJ52
Is that just a single speed gearbox or will I need a 3rd channel to operate it? Also, what battery are you running in it?
That one is a single speed gear box. I am surring 2s 7.4v lipo
Wow nice orage mn90 big thumbs up XD
Thanks man . Hope you will stay tuned for future videos.
@@RCWithPopeye Yes man XD
Do we have to change the remote and the servo
Absolutely Manoj
Really nice video thanks a lot
Thanks man.
Cool
Great video. Can you show us what electronics you’ve used and where you have put them. I am subscribing
Sure I think that is a nice idea.
Great video my friend i have finshed my d90 to and have been doing drive videos this is a great little truck i really enjoy driving👍👍💣💣😁
+Adventure Time RC waiting for the drive video of d90
what type of a tire?
Do you have proportional steering? Great video pal
Yes
Best video ever
I picked up one of these little guys and did a ton of upgrades. It is a good looking little rig but there is just no performance. Save your money and buy an axial or vaterra, whatever just buy something quality or you just wont drive it. It's different when ya have a bunch of rigs, then it's not the end of the world have an MN sitting on the shelf. They look a lot better than they drive
True
How do you make like this if you have one to buy please tell me
Hi. I didn't get your question.
hi how to remove the plastic prop shaft from ori axle & replace with metal version?
You want to replace entire axle or just change the gears?
U got the metal shafts but the ori plastic shaft seems to be glued to the axle differential can't get it out
@@RCWithPopeye i.ebayimg.com/images/g/3R0AAOSwuTRckhNS/s-l300.jpg
I simply pull it with pliers or I break the plastic parts and use the metal axle differential with metal shafts
Is this stock in thr crawling scenes?
This is one upgraded with metal axle, driveshafts and gearbox.
Please subscribe and like
Oh right thanks. I guess they were plastic before. I want to buy this for crawling so i wanna focus on upgrads that get me to that goal like in your video great crawling because a lot of people just go really fast but you didnt so respect there. Id actually want to also put smaller wheel on to make it more to scale those are a little too big im more of a relaxed crawler i like to go on trails etc. Havent been into this hobby for awhile so hence the noobie questions. Anyway great video compared to others who did on this model.
@@michael4218 thanks a lot for your wonderful reply. You can always try fayee or WPL tires for more scale look. Quite actually the tires are not a looker.
@@michael4218 bit I have tried both. Super slow crawling and super fast. I have both the videos. I like experimenting.
do you change the ESC ?
Yes
Did you are from india 🙂
Супер лайки
Thanks bro. Please subscribe. Brishless mn 90 coming soon
Nice!
Thanks !! hope you liked and subscribed to our channel.
I tried to open the metal connecting rod and now my rc is not working
Probably upgrade the suspension as well. It looks so bumpy
True
Popeye I can't wait to see your review on the NEW MN45
On the way friend.
Sorry I meant the
mn fj45 but thank you sir for knowing what I meant
i think more better if u install differential axle..
Yes
Amazing👍👍
Thanks Little.
I ordered the red one
Just remember to have the metal axles as they are absolutely required for this. These toys are not meant to survive in stock.
@@RCWithPopeye I saw drive shafts metal on eBay fits mn 90 and others
Cool. Then you are good to go.
What motor you got in stocks rubbish
370 Power Motor All-metal Gearbox : www.gearbest.com/rc-car-parts/pp_009125127051.html?wid=1433363&lkid=19301819
The cheapest option would be any 180 motor. It will fit into the existing gearbox
Where is this earia?
Bangalore
Привет, мне понравились твои видео , я тоже снимаю про такие машинки , я подписался на твой канал)
спасибо большое друг
I subscribe ur channel are you living in India?????
Yes
@@RCWithPopeye I want to buy plz suggest me which one is best wpl, jjrc, mn90,fayee002a
Come crawl mith me in Dubai hit me up
Haha. I wish