You're the man Warren.Auto service tech had my own shop for 36 yrs.Anybody that gives you negative comments are just Jealous of your ability.They aren't capble of cleaning your tools.Keep up the Great work.I love your channel.Great teacher and down to earth BRAVO!
I like your videos. I have a litte family company from Spain. We manufacture spare parts for tractors, balers and combines of John Deere. Thank you for your passion.
I did this same job just had to replace the seal. Haha ya I ended up having to take the whole front end apart. Your right you don't want them pistons to rotate at all really. It will ruin a day like you said. There a pin in there you don't want falling out.
Looks like Blake has some good sense about him. Seems to have a good grasp of, just the right amount of adjustment, on that housing and jack. Made it look easy, and I know a critical touch is needed. Thanks for sharing.!!!!👍👍👍👍👍👍
I really enjoy your vids and the scenery Warren. I’ve known a few heavy machine mechanics such as yourself and have a basic idea of what you do. Your a very good mechanic 👍✌️
Great vids! For some reason I can watch your vids for quit awhile. Anyway, figured I'd try to give you my 2 cents for watching. Free storage containers: empty coolant jug, cut the side off so it's kinda like a drain bucket, then 6 empty oil quarts cut at about the 450ml and put those in the coolant jug now you have 6 space container you can leave at the job or whatever. 2nd a small 1/4" socket like 11/32" (that hardly get used) and wrap about 1/4" electrical tape around, makes taping tight spots nice. Those are my two tips haha thanks.
Looks like Colt and Daisy enjoy having Elie there, another good job done happy thanksgiving, we don't have that here unfortunately got to wait till Christmas for some time off with the family it looks colder than here already do you get a lot snow there
I wasn’t expecting a video by Warren so early! Appreciate it though. Always great content. Looks like it’s getting cold in the shop. Thanks for sharing.
for your skid steer , the oil pans was rubbing on the chain case , the fuel tank if i remember right is built into the frame on the left side depending on the model , might be an idea to open it up and check the chain tension while you already have the engine out , nice job buy the way , you did a great job figureing out how it comes out
Warren great video as always I wished I would of watched your video earlier and known you were going to be in Baker city Oregon on Friday I would come up and try to meet you been watching your channel for well over a year now or more lot of information and thanks for turning me onto David Hale he is a funny guy take care
Looks like the weather man was wrong, unless 6'' of snow is a record lol I like that torque wrench , bet it comes in handi several times a month . Like the scenery when on the test drive
I noticed you asked Blake quite nicely and said please. I know why, he had the hammer slamming the steering thang into place with your hands in range.....
Did you send snow to new mexico?if you did keep it with you in your area.we dont need snow here.live seeing to old girl.bgings back memories of me back on the farm running one for many hours
Have any ideas what this problem could be? Old ass Massey Ferguson shovel loader perkins 4 cylinder. Was ran out of fuel one time and hasn't been straight since. Replaced fuel filter. Bled fuel got it running and will idle all day, drive it around the yard and hit a bump and it shuts off and you have to bleed it again. Drive it and fowards and go to back up and it shuts off and has to be bled again. Cant figure it out
The steer looks to be a good design. But why couldn’t they incorporate some sort of a stop so they can’t come out? Dirty tricks! This is probably in the manual. But I’ve run into thinks like this that wasn’t is the manual! Sennebogen is noted for that!
Geez, the 1st video I could see the pretty girls calendar on the right windshield. This one not. So was there a morality update done? Enjoy all your videos pretty girls or not.
kenneth connors his helper put his foot order the hub of that steering gear at least three times. Chains snap and bolts break. Jus sayin. Warren can't watch him every second.
At about 12:00 into the video he hit the bolt he has torqued with a hammer. Why does he do that? Not trying to be critical or anything, just qurious and trying to learn. Sorry for my english in advance :)
The Drop arm ( steering arm) is really heavy, he hit IT- not the bolt- because the whole weight of it is resisting the torque he is applying. He knocked it ever so slightly further up the spline and then found he was able to tighten the bolt further twice. It's the same principle with kingpins which are a taper fit in the axle, the thrust bearing adjustment will be too slack unless the weight the axle carries is applied to the pin (or for some designs the stub after the pin is fully home).
just had a thought... how about 2 ton engine tilter on both sides of the axle housing to tilt it with the cranks as its coming up.. www.harborfreight.com/2-ton-capacity-heavy-duty-load-leveler-60659.html might also work for engines. its just a thought.. when i shoe horned this in last week.. imgur.com/a/WqJfZEj if you look at the second from the last image.. you will see i added a spare tire cable hoist from a 97 dodge truck i had laying around to give me just a few more degrees of tilt.
trucker 5167 that’s crazy, how could anyone dislike this? It’s just a guy working on a tractor, it’s titled as such, it’s not difficult. If someone doesn’t like it why watch it? Crazy shit. Probably butthurt about the suspended load thing still.....
You're the man Warren.Auto service tech had my own shop for 36 yrs.Anybody that gives you negative comments are just Jealous of your ability.They aren't capble of cleaning your tools.Keep up the Great work.I love your channel.Great teacher and down to earth BRAVO!
I like your videos. I have a litte family company from Spain. We manufacture spare parts for tractors, balers and combines of John Deere. Thank you for your passion.
I did this same job just had to replace the seal. Haha ya I ended up having to take the whole front end apart. Your right you don't want them pistons to rotate at all really. It will ruin a day like you said. There a pin in there you don't want falling out.
Looks like Blake has some good sense about him. Seems to have a good grasp of, just the right amount of adjustment, on that housing and jack. Made it look easy, and I know a critical touch is needed.
Thanks for sharing.!!!!👍👍👍👍👍👍
I really enjoy your vids and the scenery Warren. I’ve known a few heavy machine mechanics such as yourself and have a basic idea of what you do. Your a very good mechanic 👍✌️
Good to see Blake taking an interst Warren, hope you and all the family had a good Thanksgiving.
Great vids! For some reason I can watch your vids for quit awhile. Anyway, figured I'd try to give you my 2 cents for watching. Free storage containers: empty coolant jug, cut the side off so it's kinda like a drain bucket, then 6 empty oil quarts cut at about the 450ml and put those in the coolant jug now you have 6 space container you can leave at the job or whatever. 2nd a small 1/4" socket like 11/32" (that hardly get used) and wrap about 1/4" electrical tape around, makes taping tight spots nice. Those are my two tips haha thanks.
Them 55 and 60 series were damn good tractors.
Good day to you Mister Warren & Son !!! It is a pleasure to watch a master at work , thank you for the movies ?
Greetings Warren, thanks for sharing your talent. Enjoy watching your videos.
Warren very well done my friend also a nice road trip .sam see you on the next one be safe. Thanks.
Warren
Glad you had Blake to help with that steering shaft.🙂
I hope you and the family had a super turkey day.
Stay dry and warm.
Gotta love that Lake of the woods hiway this time of year.
keep up the....GREAT...work Warren! vids are a real insight to a guy doin real work.
Great job Warren, thanks for the overview.
another job done and dusted. great video and informative to me as a non mechanic. hope you had a great thanksgiving
Looks like Colt and Daisy enjoy having Elie there, another good job done happy thanksgiving, we don't have that here unfortunately got to wait till Christmas for some time off with the family it looks colder than here already do you get a lot snow there
Got to love a machine with out 10 different computers with 20 miles of wire
Another job done. I learned a lot in this video. Thanks for sharing.
I wasn’t expecting a video by Warren so early! Appreciate it though. Always great content. Looks like it’s getting cold in the shop. Thanks for sharing.
for your skid steer , the oil pans was rubbing on the chain case , the fuel tank if i remember right is built into the frame on the left side depending on the model , might be an idea to open it up and check the chain tension while you already have the engine out , nice job buy the way , you did a great job figureing out how it comes out
You get better and better with your camera angles.
I'm curious about how the grader works, but I guess it will come when it comes.
Great job Warren and great you have help get them coming
Happy birthday Warren 👍
Good video Warren 👌
Those FG tractors are just about the best.
Farmed a lot of acres with 40 50 55 series tractors,still have a few like the 8 series.
Surprised at size of OEM washer they supplied you with.
Glad you got extra hands around now.
Liked vlog first then watched it, great as always...
Good job Blake you saved the day
Enjoy your videos, would really like to see that pop tester in action for that bobcat injectors. I even got my son watching your videos. Safe travels.
Great to see this Videos thank you for making them
Nice step by step work....from a UK mobile welder....
Warren great video as always I wished I would of watched your video earlier and known you were going to be in Baker city Oregon on Friday I would come up and try to meet you been watching your channel for well over a year now or more lot of information and thanks for turning me onto David Hale he is a funny guy take care
Looks like the weather man was wrong, unless 6'' of snow is a record lol I like that torque wrench , bet it comes in handi several times a month . Like the scenery when on the test drive
hehe just as well was not a leak in the seal... the camera would have been directly in the path of the flow :) Another great video Warren thank you :)
Happy Holidays Warren! I get many questions and comments when I wear your shirts in the neighborhood. Wish you the best in 2021!
i like those mechanical tractors too Warren. Least they will crank if the battery is hot. LOL most of the time any way
Hope you had a great Thanksgiving
Thumbs up Warren and Blake enjoyed the video
Great video.
I noticed you asked Blake quite nicely and said please. I know why, he had the hammer slamming the steering thang into place with your hands in range.....
pretty involved! Thanks for explaining!
Ya thats the biggest torque wrench I've ever seen in all my life. Is it a craftsman? can you get another one if ya break it?
Looks like a Snap-on TQR series.
Great job .
Damn , what is all the white stuff? you mentioned there was a chance of , but really !
Hell we even went for a ride. Happy Thanksgiving.
Hey Warren have you ever had a brand new waaher From deere split? Got a 4960 thats giving me fits. New arm/washer/bolt and everything.
Now THAT'S my kind of eye candy (23:30).
Too bad the front axle pivot points aren't removable pillow blocks.
Did anyone else notice a leak when he started it to turn the wheel
Nope that was dirt falling off.
Did you send snow to new mexico?if you did keep it with you in your area.we dont need snow here.live seeing to old girl.bgings back memories of me back on the farm running one for many hours
Heard you mention Medford OR, is Tucker still there?
Don't know a Tucker in Medford.
tell the farmer to use expensive high temp grease it lasts 10 times longer
jasonmushersee There’s a lot of high quality grease on the market now. Even cheap Supertech grease from Wallyworld is better than nothing.
Throw a little ATF in the fuel that will clean up them injectors!
Have any ideas what this problem could be? Old ass Massey Ferguson shovel loader perkins 4 cylinder. Was ran out of fuel one time and hasn't been straight since. Replaced fuel filter. Bled fuel got it running and will idle all day, drive it around the yard and hit a bump and it shuts off and you have to bleed it again. Drive it and fowards and go to back up and it shuts off and has to be bled again. Cant figure it out
The steer looks to be a good design. But why couldn’t they incorporate some sort of a stop so they can’t come out? Dirty tricks! This is probably in the manual. But I’ve run into thinks like this that wasn’t is the manual! Sennebogen is noted for that!
Makes a h*** of a difference with a little help
👍👍👍👍
Now, that's a torque wrench!!
Why’d ya blur out the calendar?😕
😜🤪😂😂
Tiddys no doubt
@22:39
@@goglu2 hmm, nevermind I got no idear
Snow Explorers/Altitude Off-road SEAO funny, I just posted about that issue. Good eyeballs!👀
Geez, the 1st video I could see the pretty girls calendar on the right windshield. This one not. So was there a morality update done? Enjoy all your videos pretty girls or not.
It looks like you didn't get the tail for the bolt lock tab down into the notch that should hold it.
Half the time I don't put the tabs on they don't do anything anyway.
👍
looks like you may have found the extra pair of hands you need to complete these jobs faster and better
That's his son Blake
kenneth connors his helper put his foot order the hub of that steering gear at least three times. Chains snap and bolts break. Jus sayin. Warren can't watch him every second.
@@timmayer8723 I bet Warren has done worse over the years.
Warren ever do any work at amigo farms back about 20 years ago or such????
Used to run Bale wagon for Larry Versilotti who hauled for Cotton one of the owners.
At about 12:00 into the video he hit the bolt he has torqued with a hammer. Why does he do that?
Not trying to be critical or anything, just qurious and trying to learn. Sorry for my english in advance :)
The Drop arm ( steering arm) is really heavy, he hit IT- not the bolt- because the whole weight of it is resisting the torque he is applying. He knocked it ever so slightly further up the spline and then found he was able to tighten the bolt further twice. It's the same principle with kingpins which are a taper fit in the axle, the thrust bearing adjustment will be too slack unless the weight the axle carries is applied to the pin (or for some designs the stub after the pin is fully home).
How much would that arm have cost?
$306.60 from green parts store new, R61159 from partscatalog.deere.com/jdrc/
Look it up and price JD factory parts all you want.
SAFTEY FIRST !!!
Hey Bunny did you see how much them JD fetched at auction
Jon Doherty I saw it. Nice retirement package for the farmer and mrs.
What's up with the grader engine
markam campbell think he’s waiting on crankshaft coming back from the machine shop so he knows what to order
just had a thought... how about 2 ton engine tilter on both sides of the axle housing to tilt it with the cranks as its coming up.. www.harborfreight.com/2-ton-capacity-heavy-duty-load-leveler-60659.html might also work for engines. its just a thought.. when i shoe horned this in last week.. imgur.com/a/WqJfZEj if you look at the second from the last image.. you will see i added a spare tire cable hoist from a 97 dodge truck i had laying around to give me just a few more degrees of tilt.
How much snow did you get?
Nothing like they were forecasting, maybe 8--12 inches , hard to tell wind blew like hell and drifted really bad.
Love your videos you know your shit my friend!!!!
Does John Deere paint the inside of all their gearcases and engines with that yellow paint?
Yes, most are that color.
why the blurr?
So RUclips doesn't demonetize me.
People get sensitive when you show boobies.
Or bush! LoL
3 tree huggers didnt like the video
trucker 5167 that’s crazy, how could anyone dislike this? It’s just a guy working on a tractor, it’s titled as such, it’s not difficult. If someone doesn’t like it why watch it? Crazy shit.
Probably butthurt about the suspended load thing still.....
AAAAA++++