Question for you, that metal block with the yellow springs is that some kind of locker if so how does it work, and did u make this or is it a kit, and if u made it where did u get the measurements for it, just curious maybe I can do a cheap locker set up for an old Subaru or half ton Chevy without welding it !!!!
@@nobody4634 look up Lock Right locker 👍 They work awesome! No welding, they lock under load giving power to both wheels, off throttle they unlock so they don’t scrub tires in corners. I think you would like one. They cost about $250 but are worth it.
I cannot stress enough how much I appreciate the format of this channel and the videos. So many channels are filled with useless dialogue or shameless promotion. Donn just keeps it real. Straight content, no filler. My favorite channel on YT. Keep it up, Donn!
Donn, you are an intelligent and talented man. Here in the UK, we have a saying "Jack of all trades, master of none." - but you are a "Jack of all trades, master of them all."
an oft misquoted and misused Shakespearian quote This so-called jack of all trades was in fact William Shakespeare. The full phrase is “a jack of all trades is a master of none, but oftentimes better than a master of one.” It was a compliment.
That's a lot of work man. Must be hard to have something finished and then say, "Well time to take it all back apart for finishing and paint!!" Nice work!
I have always wondered how those limited slips preform, looking forward to seeing the difference 👍 I installed a lockright in my Suzuki sidekick and it was a fantastic upgrade! Lots of work to take it all apart again but having everything painted will be really nice. Thanks for posting Donn 🙂
You have long since left the realm of ordinary DIY, Donn. Nevertheless you remain a shining example for all those guys who at a lower level want to be creative in their own way. Keep amazing us, dude!
I mean, if you do things yourself it's still DIY, isn't it? While you do them you get more skilled and thus the ordinary known "hot glue gun" DIY evolves into something else. But it's still DIY for the person who does it, I think.🤔
Donn DIY Absolutely! Every project you do on your own is DIY. But there is a galactic difference between your work and that of the commoners. And that is by no means denigrating towards them.
This guy is producing first class content, true genious at work and not promoting mass produced trash products or anything else. You might wondering what is the catch? And it is that he is from Eastern Europen county side so degenerate western ways haven't corrupted him. So glad I have found this channel. And that is one beautiful Fronius machine and workshop.
A good pair of pliers to remove snap rings of that size would be a set of parallel snub nose pliers fitted (welding or grub screw) with pins. Because they're parallel, they'll never let loose the ring, causing untold destruction and panic. :)
That sounds like a good tip, I never heard of (parallel snub nose pliers) Most snap rings have always gave me a hassle, make wonder why there isn't any (parallel snub nose pliers) that are>>>>snap ring pliers............
I’m sure I’m not the only one that’s glad that you ran the footage of the disassembly and reassembly at half speed so we could see what you were doing. 😉 I might be slightly disappointed that you didn’t paint it the red/orange colour that you’ve used in the past.
No no, it has to be green as that is the colour of all great makers on RUclips, Cà Lem uses it on his channel and Matthias Wandel has his own shade of green. Green is go.
Love this build ! It's good and sad at the same time! It's good it's almost complete but Sad it's finished! I hope you have plans for another epic build?! Cheers from Sydney Australia 🇭🇲👍🐨🦘🦘🐨👍🇭🇲🇪🇪
I was really hoping that something would "fit like a glove" this week, but no such luck. Looking pretty cool, it's always so much better when things get a paint
i'm always impressed with donn's fabrication skills, but what really blew me away this time was the short parody of "ain't no mountain high enough" lol!
Great Video .. You built the machine was great ,, then you take it all back apart into a million pieces .. finish weld and paint . great work .. then you remember where all the bolts go .. keep up the great work and videos you do .
Awesome my dude!! I'm making snowplow mounts for ATV. And I think I'll do my pins the same way you did. Simple things like that I enjoy watching. Also Great choice on the paint. Love this episode thanks Donn.
Ha! I see the Make It Extreme guys donated some paint. J/K I'm impressed by your mechanical knowledge of these old car parts and how to modify them to suit your design. It's a fact that this off road vehicle will be unique. 😉
Wow man that's a lot of work .....kinda like building it all over again ......but it will look FANTASTIC and will be painted the right way very nice work I look forward to the next video !! 👍👍
I see that the process for removing snap-rings is the same as the US. 1. Try 2. Cuss at it 3. Cuss at it some more 4. Break pliers( a lot more cussing) 5. Get new pliers 6. Cuss at it some more 7. Finally it almost falls out on it's own! I feel your pain. Keep after it. That UTV definitely has a mad max vibe. How about a powered trailer like a Gamma Goat to put behind it?
Great job Donn, getting closer to the finish line! Really looks great! Thanks for sharing with your projects with us, alway enjoy watching your videos, Fred. 🙏🏻🙏🏻👍🏻👍🏻👏🏻👏🏻✋🏻✋🏻
Excellent work , your engineering skills and intelligence are amazing . A pleasure to view work of your calibre . . I always view your content because of the different content and ideas you bring together to make excellent machines . Keep up the excellent work and content . From northern UK . .
There is one side note of your videos that I appreciate and not many seem to notice or even care about. Creators like yourself and Make it Extreme list what music was used in the video. I appreciate that for the rare times I hear a song and like it. Now with that said, this machine is looking mean. Been following since before the build. Puts the homebuilt go-kart me and the grandfather made to shame.
Limited slip differentials are the way to go, but since your track width distance side to side is only about 3 to 4 feet and your tires will only be driving on grass and probably never see concrete pavement, I wonder if you really need front and back differentials at all. Maybe on the steering front, but probably not on the rear. I think the rear axles could be welding together like you did with the front to back differential in the transmission. Just a thought. Great job! Loved watching it be built.
Neat design for that snow plow mount pin. Though I think I'd be tempted to put a nut on the end. If that thing gets rusted in there, err, WHEN it gets rusted in there it's going to be a bear to remove. With a nut you could not only turn it with a wrench, but also use a slide hammer to hammer it out of it's blind hole.
Hi Donn, Absolutely beautiful, what an awesome project. Love everything about it, but mostly your determination to quality and perfection. Thanks for the video.
I subscribe to 264 channels & yours is top to watch, the others cannot compare! when you started with the panels I thought of a tank, when you painted it, it now looks like a tank. the build looks bulletproof, your attention to detail is awesome! I'm waiting to see if you wrap the wiring harness in loom. very nice, would love to have it in Montana USA !
Citroen/Peugeot really knock it out the park with the engine in the berlingos/partners from the early 2000's, the petrol wasn't as strong but the diesels just seemed to go on for ever and ever, i was running one with blown gaskets mixed oil and water for months and months, it would take a hot minute to starting the morning and smoke screened my entire street whilst doing so but once started it ran flawlessly driving on average 100 mile each day 5 days a week,
Man you are …I don’t know, from which planet you said you are? This is just amazing, I wish I was close to assist you, Damn I am fucked up now, tomorrow morning going to look for a used Peugeot and few BMW difs..
Really liked this series- have huge, unreal expectations of your next- maybe a 100 tonne motor crane?- awesome is what you do before you think about it much! The use of sub titles for music credits was a great touch- I often wonder what your choices were and the "credits in notes below" take forever to link up! FR
Me at the halfway mark of the video: Thank god, there's still the half of this goodness left. Also me at the halfway mark: God damn, there's only half of this left anymore.
Donn, this thing is a beast! I have a feeling it'll take a lot of abuse and give you years of trouble free service! I like the paint job too, Kawi green or is it more like John Deere? Thanks for taking the time to make these videos! I can't wait to see you off road this baby! Take us on an adventure, that LSD should be a nice upgrade fosho!
You thought you came here to see him put together that vehicle. What you really came to see was a master grinder at work did you watch that metal as it bowed before its Master doing his every will. D o n n is the master grinder moo hahaha
More fabrication videos on ruclips.net/user/DonnDIYvideos
Question for you, that metal block with the yellow springs is that some kind of locker if so how does it work, and did u make this or is it a kit, and if u made it where did u get the measurements for it, just curious maybe I can do a cheap locker set up for an old Subaru or half ton Chevy without welding it !!!!
ain't no pliers long enough... but with these extensions they're strong enough
@@nobody4634 look up Lock Right locker 👍 They work awesome! No welding, they lock under load giving power to both wheels, off throttle they unlock so they don’t scrub tires in corners. I think you would like one. They cost about $250 but are worth it.
I cannot stress enough how much I appreciate the format of this channel and the videos. So many channels are filled with useless dialogue or shameless promotion. Donn just keeps it real. Straight content, no filler. My favorite channel on YT. Keep it up, Donn!
+1
I can't agree more 👌👏👍
+1000
Good timing when you're just opening RUclips looking for something to watch and up pops a Donn DIY notification! Kettle on...
Indeed
Right on Time 😁
Agreed!
Word…… 🥳
Donn, you are an intelligent and talented man. Here in the UK, we have a saying "Jack of all trades, master of none." - but you are a "Jack of all trades, master of them all."
Alternatively, jack of all trades is better than a master of one.
an oft misquoted and misused Shakespearian quote
This so-called jack of all trades was in fact William Shakespeare. The full phrase is “a jack of all trades is a master of none, but oftentimes better than a master of one.” It was a compliment.
@@davidp8157 I saw that TikTok too
@@MrJeb707 not tik tok for me, actual education,
That's a lot of work man. Must be hard to have something finished and then say, "Well time to take it all back apart for finishing and paint!!" Nice work!
...and also filming and editing etc...
Donn DIY, вы великий изобретатель. Лайк, великому мастеру. Guter arbeit, mein Freund.
I have always wondered how those limited slips preform, looking forward to seeing the difference 👍 I installed a lockright in my Suzuki sidekick and it was a fantastic upgrade!
Lots of work to take it all apart again but having everything painted will be really nice. Thanks for posting Donn 🙂
We will see how this LS works.🤘🙂
@@DonnDIY could you tell me what kind of LS is it and the brand name ?
Приємно бачити що людина насолоджується готовим продуктом а не напівфабрикатом. Лайк.
Aaaah Don,Im so happy you painted it! Now go and paint the Saw Mill:) Very well done!
how? he sold it was in the last vid?
And to think this started with a scrap car and piles of lumber and steel.... Marvelous! Like a glove!
You have long since left the realm of ordinary DIY, Donn. Nevertheless you remain a shining example for all those guys who at a lower level want to be creative in their own way. Keep amazing us, dude!
I mean, if you do things yourself it's still DIY, isn't it? While you do them you get more skilled and thus the ordinary known "hot glue gun" DIY evolves into something else. But it's still DIY for the person who does it, I think.🤔
Donn DIY Absolutely! Every project you do on your own is DIY. But there is a galactic difference between your work and that of the commoners. And that is by no means denigrating towards them.
This guy is producing first class content, true genious at work and not promoting mass produced trash products or anything else. You might wondering what is the catch? And it is that he is from Eastern Europen county side so degenerate western ways haven't corrupted him. So glad I have found this channel. And that is one beautiful Fronius machine and workshop.
Сколько же знаний и трудолюбия в этой голове....про руки я вообще молчу, завидую белой завистью!👍👏
They should reward you with the Nobel Prize for "Do it yourself"
A good pair of pliers to remove snap rings of that size would be a set of parallel snub nose pliers fitted (welding or grub screw) with pins. Because they're parallel, they'll never let loose the ring, causing untold destruction and panic. :)
That sounds like a good tip, I never heard of (parallel snub nose pliers) Most snap rings have always gave me a hassle, make wonder why there isn't any (parallel snub nose pliers) that are>>>>snap ring pliers............
You’ll have to remember if you ever need a little round tab or a tube cap you now have like 100 of them in the bottom of your plasma table haha.
With this paint, this vehicle really starts to have a hell of a look, we are not very far from the end
Great build and video work! The green is a nice choice I don't think John Deere could pull off something done this good.
Definitely looks more like Bührer green - and more like Bührer quality!
Комментарий в поддержку канала и ролика, а также труда мастера.
Just gotta love how you just "wing it, and make it fit/work". Can't get enough of your vids! Great work as usual Donn!
I've been watching your channel now for some time and am amazed at your skills and ingenuity! Your parents must be so proud of you.
I’m sure I’m not the only one that’s glad that you ran the footage of the disassembly and reassembly at half speed so we could see what you were doing. 😉
I might be slightly disappointed that you didn’t paint it the red/orange colour that you’ve used in the past.
No no, it has to be green as that is the colour of all great makers on RUclips, Cà Lem uses it on his channel and Matthias Wandel has his own shade of green. Green is go.
The lock for your tip bed - so simple - so elegant! Fantastic!
Right on time I was bored thank you💪🏿💯
I'm impressed that you didn't have to use an angle to disassemble the UTV, a credit to your thinking ahead. 👍
Love this build !
It's good and sad at the same time!
It's good it's almost complete but
Sad it's finished!
I hope you have plans for another epic build?!
Cheers from Sydney Australia
🇭🇲👍🐨🦘🦘🐨👍🇭🇲🇪🇪
you're complete man.....smart,skill full & rich.....amazing broo.....!!!
You are almost done! Other than the internal Engine parts you practically have a new ATV. Excellent work! Really enjoyed 👍👍
Take note, this video has rare footage of Donn DIY actually sitting in a chair! Thanks for sharing, this build has been amazing to watch!
This is a professional level workshop and tools. Excellent video.
The dark glasses didn't work, we still recognised you sitting and watching your "blaster piece". Great series.
You are very inventive and you can sure lay down some nice welds, 👍awesome work. I could enjoy watching you work all day.
your editing skills are really good -in reality all the jobs you do take hours and hours - fantastic work :)
Давно смотрю ваш канал !все Ваши работы достойны уважения и внимания !!! Все супер
Something awesome about built vs bought.
I thought you wouldn't dare disconnecting all those wiring harness connectors.
But then again, you're the one who plugged them in the first time.
Absolute madness !!!! your manual skills are unattainable !!! 👍👍👍👍👍👍👍🔝🔝🔝🔝👋👋👋🇩🇪
I was really hoping that something would "fit like a glove" this week, but no such luck. Looking pretty cool, it's always so much better when things get a paint
i'm always impressed with donn's fabrication skills, but what really blew me away this time was the short parody of "ain't no mountain high enough" lol!
Great Video .. You built the machine was great ,, then you take it all back apart into a million pieces .. finish weld and paint . great work .. then you remember where all the bolts go .. keep up the great work and videos you do .
Даже не удивляюсь сколько у вас терпения! Вам удачи и больше роликов ,а так все супер 👍👍👍👍👍
Awesome my dude!! I'm making snowplow mounts for ATV. And I think I'll do my pins the same way you did. Simple things like that I enjoy watching. Also Great choice on the paint. Love this episode thanks Donn.
Donn: thanks for putting the music onscreen! They deserve credit, too. Nice build!
Ha! I see the Make It Extreme guys donated some paint. J/K I'm impressed by your mechanical knowledge of these old car parts and how to modify them to suit your design. It's a fact that this off road vehicle will be unique. 😉
Good One " The Make It Extreme guys donated some paint." LOL
Wow man that's a lot of work .....kinda like building it all over again ......but it will look FANTASTIC and will be painted the right way very nice work I look forward to the next video !! 👍👍
I see that the process for removing snap-rings is the same as the US.
1. Try
2. Cuss at it
3. Cuss at it some more
4. Break pliers( a lot more cussing)
5. Get new pliers
6. Cuss at it some more
7. Finally it almost falls out on it's own!
I feel your pain. Keep after it. That UTV definitely has a mad max vibe.
How about a powered trailer like a Gamma Goat to put behind it?
I built the rear differential driven PTO shaft just for that purpose - a driven trailer. I just have to build it.🙃
Great job Donn, getting closer to the finish line! Really looks great! Thanks for sharing with your projects with us, alway enjoy watching your videos, Fred. 🙏🏻🙏🏻👍🏻👍🏻👏🏻👏🏻✋🏻✋🏻
Hey Donn, what you're doing is freakin awesome! Cheers!
They say. The green color is chosen by geniuses! )))))
Excellent work , your engineering skills and intelligence are amazing . A pleasure to view work of your calibre . . I always view your content because of the different content and ideas you bring together to make excellent machines . Keep up the excellent work and content . From northern UK . .
you are a metal "artist" and a great fabricator!
There is one side note of your videos that I appreciate and not many seem to notice or even care about. Creators like yourself and Make it Extreme list what music was used in the video. I appreciate that for the rare times I hear a song and like it.
Now with that said, this machine is looking mean. Been following since before the build. Puts the homebuilt go-kart me and the grandfather made to shame.
Limited slip differentials are the way to go, but since your track width distance side to side is only about 3 to 4 feet and your tires will only be driving on grass and probably never see concrete pavement, I wonder if you really need front and back differentials at all. Maybe on the steering front, but probably not on the rear. I think the rear axles could be welding together like you did with the front to back differential in the transmission. Just a thought. Great job! Loved watching it be built.
Loved the little reinforcement diamond patches!
And the "Higher Octane" soundtrack, sounds like early Slayer drums...
:-D
Thx for the vid!
Brilliant all action video. Thanks. Love the Irish Green Colour 🇮🇪☘️
Neat design for that snow plow mount pin. Though I think I'd be tempted to put a nut on the end. If that thing gets rusted in there, err, WHEN it gets rusted in there it's going to be a bear to remove. With a nut you could not only turn it with a wrench, but also use a slide hammer to hammer it out of it's blind hole.
👍👍
I thought that it would never be colored.
Finally. Very good.
Hi Donn,
Absolutely beautiful, what an awesome project.
Love everything about it, but mostly your determination
to quality and perfection.
Thanks for the video.
I'm enjoying your FrankenBuggy build.
Can not wait to see it finished!
Greetings from Croatia!
You are awesome Donn. You always make the right choices. (You know; in the end!)
Very nice work.
I just wanna say the music in this video freakin rocked !!!
You impressed me again, very nice work, and great choice of paint.
I want to thank you for sharing your journey it has given me inspiration to try something myself 👍👍
Работа сделана потрясающе ,мастер, одно слово.
Beautiful. So much work in this crazy build.
I subscribe to 264 channels & yours is top to watch, the others cannot compare! when you started with the panels I thought of a tank, when you painted it, it now looks like a tank. the build looks bulletproof, your attention to detail is awesome! I'm waiting to see if you wrap the wiring harness in loom. very nice, would love to have it in Montana USA !
congratulation for all episodes and patience and organized planning very goooooooooooooooooood job
لقد شاهدت كل مقاطع الفيديو في هذه السلسلة
عمل رائع يستحق كل التقدير والإعجاب
Glad you took the time to clean it up.
Donn, It looks great. Like the color choices too. Amazing to see it come so far, in such a short time. Look forward to next video.
Oh yeah it’s really looking good now, looking forward to see it completed. 😊👍🏻
Cheers man!
Excellent work
Citroen/Peugeot really knock it out the park with the engine in the berlingos/partners from the early 2000's, the petrol wasn't as strong but the diesels just seemed to go on for ever and ever, i was running one with blown gaskets mixed oil and water for months and months, it would take a hot minute to starting the morning and smoke screened my entire street whilst doing so but once started it ran flawlessly driving on average 100 mile each day 5 days a week,
Very Happy for U... At the beginning of the Video, I was wounding, when is Donn going to Paint, and amazing this was the Video........ :)
Love it mate this little Tonka Truck will look out for you all winter I rekon
Awesome build! Still think another rack and pinion in the rear for a 4 wheel steer would be cool too!!
Man you are …I don’t know, from which planet you said you are?
This is just amazing, I wish I was close to assist you, Damn I am fucked up now, tomorrow morning going to look for a used Peugeot and few BMW difs..
With that green paint, you need yellow trim pieces/wheels and some John Deere stickers. 😁
Incredible Donny. Love this build!
Really liked this series- have huge, unreal expectations of your next- maybe a 100 tonne motor crane?- awesome is what you do before you think about it much! The use of sub titles for music credits was a great touch- I often wonder what your choices were and the "credits in notes below" take forever to link up! FR
Looks great, can't wait to see it finished.
Me at the halfway mark of the video: Thank god, there's still the half of this goodness left.
Also me at the halfway mark: God damn, there's only half of this left anymore.
Excellent as always 😎👍😊
Excellent work
Look's amazing. Greetings from 🇺🇸👍👍
Love watching all these vids! Great job!
Hi, awesome Donny awesome!!! Many thanks for the videos.
Good job man!
Donn, this thing is a beast! I have a feeling it'll take a lot of abuse and give you years of trouble free service! I like the paint job too, Kawi green or is it more like John Deere? Thanks for taking the time to make these videos! I can't wait to see you off road this baby! Take us on an adventure, that LSD should be a nice upgrade fosho!
Painting will take 17 billion years!!!!
Bonjour superbe professionnel je pense que vous êtes artisan vue les machines et l’équipements pour la matière 👍
Thanks to video Donn! Thats very big project! 🔧🎅🏻👍🏻🇫🇮🇫🇮🇫🇮
Complimenti lavori bene e con criterio sei molto bravo sai lavorare hai un cervello fino un saluto Gianni
Ive really enjoyed this biuld been watching from the beginning been awesome watching it cometogether great skill
Greeeeeeen one? Really? Didn't expect from you 😁
Green! You finally used up your red paint :)
Such a cool build! Very inspiring!
Wow Donn, you are just a fabbing machine. Love tge color.
You thought you came here to see him put together that vehicle. What you really came to see was a master grinder at work did you watch that metal as it bowed before its Master doing his every will. D o n n is the master grinder moo hahaha