CABLE TRAY U-TYPE BEND ACCURATE SUPPORT TO SUPPORT/TAGALOG

GUYS KONG GUSTO NIO MAY IDEA KAYO TUNGKOL SA IMPULSE LINE TUBING LALO NA ANG WORK NYO AY SA REFINENARY OR POWER PLANT ITO PO ANG LINK
• PAANO MALAMAN ANG HIGH...
• PAANO MALAMAN ANG HIGH...
• PAANO MALAMAN ANG TAPP...
• PAANO MAGBASA NG PIPIN...
How to bend 22.5 degree of cable tray 3 layer with the same distance and gap • HOW TO BEND 22.5 DEGRE...
How to bend 90 degree of cable tray 3 line with the same distance :// • HOW TO BEND 90 DEGREE ...
Different sizes of cable tray what is the travel tips and ideas
• DIFFERENT SIZES OF CAB...
Tips how to bend cable tray using x.80 formula any sizes of cable tray • TIPS HOW TO BEND CABLE...
How to bend cable tray 2 90degree with out cut accurate support to support horizontal line • HOW TO BEND CABLE TRAY...
How to bend 90 degree ang 45 degree of cable tray using 3 basic formula • HOW TO BEND 90 DEGREE ...
How to bend a cable tray with same distance • HOW TO BEND A CABLE TR...
How to make long raduis 90 degree o a cable tray with 4 bend accurate to support and joint • HOW TO MAKE LONG RADI...
How to bend 45 degree of cable tray using 1.414 formula / tagalog • HOW TO BEND 45 DEGREE ...
How to bend 90 degree of cable tray accurate to joint and support with 22.5 degree offset • HOW TO BEND 90 DEGREE ...
Cable tray u type bend accurate to support to support • CABLE TRAY U-TYPE BEND...
How to bend a cable tray bridge type • HOW TO BEND A CABLE T...
How to bend 11.25 degree of cable tray using x0.80 formula
• HOW TO BEND 11.25 DEGR...
thanks for watching and godbless:

[@ramilvega7686]

Salamat sa demo Sir, minsan talaga kailangan i fabricate sa site, kasi alanganin ang standard fittings factory bend tulad ng mga Tee, 90/45 deg bend. Sa mga commercial, high rise at industrial bldg. madlas ito ginagamit, at available in PVC or metal trunkings.

[@ferdinandresuena3634]

Nice sir na i share nyo sakin ang kaalaman nyo... Dahil po jan 99% ako subcribes nyo..

[@jub.tv123]

salamat sir at ingat lagi sa work keep safe po godbless

[@jhodiemac_30vlog14]

Nice tutorial new subs here..shout out

[@jub.tv123]

Cge po sir next upload po

[@kitng5492]

Thank you sir

[@arvinpacurza5620]

Sir pede po pagawa ng tutorial ng vertical na double 90 degre ung support to support..salamat

[@romelevangelista5060]

sir pasensya na po ngayon ko lang napanood ang video mo saan po nakkoha ang ×5 mo doon sa isang video mo 3.67 ang formula ano po ba formula kada cable tray salamat po sana masagot ang tanong ko ingat po n God Bless..

[@jub.tv123]

Ito po ang link sa formula sir may mga video po ako dyan sa cable trayruclips.net/video/pBW7vTvFBws/видео.html

[@richardgeronimo3507]

sa travel 250÷50=5×3.67= 18.35 minus mo sa una sukat kng sa 350 minus 18.35 = 331.65 yan sukat mo una v cut mo tapos. travel 250 yan last v cut mahirap yan formula pwede agad sa 350 una sukat minus ng 250 = 100 yan una v cut. hndi mahirap madali lng 250 mo nlng travel hndi time pa.

[@nadribbon4254]

Boss pnu mo nkuha ung travel na 10 mm

[@millenajumell6877]

Ginawa ko yan sa 100mm di umobra sir.
Kinapus ako ng 40mm

[@rmascarinas47]

ano ang standard formula Sir kung masmalalapad ang cable ladder para sa offset at 90°

[@jub.tv123]

May mga video ako dyan sir, na iba pati ang formula sir watch mna lang dyan...godbless po