Hey guys, I tried to make this guide as clear as possible to you. Still, if you have questions about the process or any other feedback to me, feel free to leave a comment below. Enjoy!
@anarios-yx3cc hi dude, not sure what device you mean, but in general your device needs to run the ssh service, have wifi and you need to know the ssh login credentials. That‘s it.
Hey Alex, great to see you too! How are you doing my friend? Yes, it‘s good to be back. I really missed you guys. Found a little time, so i decide to make a new video ;)
Hi I need help :( I have done everything correctly up until 8:39 I tap on the Download folder but there are no .zip files it will only show picture files such as .jpeg .jpg .png .gif, how do i get it to acknowledge the .zip files?
Goooorrddoooonn :) yes, kinda. I can‘t tell you when my next video will come, because i‘m still on limited time, but it feels good to be back for a video ;) How‘s it going my friend?
Thank you for the tutorial. I can't connect my RG351M with my smartphone. I found out, I have to enable remote services on my handheld with arkOS. Now it works. 😊 It works with PC either. ;)
Yes, if you use ArkOS, you need to enable the remote service first. And also, you have different login data. I should have mentioned that. Still, i‘m glad you got it working for you my friend :)
Awesome and heplful, this will be a god send. No sd card either huh? Wow man. I haven't gotten my device yet, im about to get into retro gaming. I miss the classics. I dont have a pc and the whole process seemed kinda daunting, but not this. Ill be using your guide when i get to that point. Great video
Thank you, getting my handheld today. i have a question about this, im using an anbernic device (rg-arc) would the password be the same (Root and Emuelec)? @MashTec
@@GameSlayer41781 Congratulations to you new device dude! It‘s pretty new, i never had my hand on a RG ARC so far. I also did a research in the net with no success :( sorry, i have no help for you here.
Thanks man. No worries. I have a phone with an sd card slot. I could use it to transfer games and or cfw? What about connecting them with a c to c cable?
@@GameSlayer41781 Yes, you can always use the sd card to transfer files from and to your device. A USB cable connection requires support of a data-transmission protocol via USB. I doubt the handheld supports this unless it runs Android or someone writes a special driver for it.
Hello my friend, yes you can. Just enter the RetroArch menu at any time and safe the game at any state. Later you can load the state and continue seamlessly :) i hope that answers your question.
@@MashTec uhmm where i can see that menu ? I think i try that in times but once i off or change some games to play my game what i save was not continue or my save file was not there ... Do you have a video about on that unit how to save so everyone can see it specially me ? Because i was always stressed on that i really love to play RPG games but my effort was so useless when i did not save my game :( i wish you will help me
Hey dude, sorry for being late. I didn‘t see your post. Please try the following credentials: login: root pass: 351elec I hope it works. Please let me know!
Excuse me sir, I already use hotspot but I can't connect to RG351p. Maybe this is the reason: 1.I'm not using Wi-Fi hotspot (I can't find it). can you help me please...
Hi dude, this tutorial technically works for any device that supports WiFi with SSH connections m. You just need to login credentials to establish the connection. Unfortunately i don‘t own a RG35xx H. So i don‘t know the login data.
My anbernic is already on the way but I want to download psp and the Nintendo 64 emulator can you let me know if I can what are the credentials found if you know
@@bulletobreratrey9108 I‘m sorry, hard to figure out the correct login credentials without the device. Maybe google can help: search for RG35xx H and ssh login or credentials. I hope you find it like that.
I tried doing this on my ambernic rg355 h and it's giving me a authentication attempt error when I try to connect to the files on my arbenic? Can you help me out
Hi dude, you need to know the ssh login credentials (login/password) of this device. It depends on the firmware you run on it. Are you on stock or any custom firmware? And what device model? I don‘t know any RG355H, you mean the RG35XX H?
Do you know if there is a way to flash the firmware without the need of a PC by using this technique? I want to install AmberElec if possible, or something similar/better.
Hi dude, yes you can. Take a look at "EtchDroid" in Google PlayStore. You may need an OTG USB to sd card adapter or use your internal slot (if your phones has one). Then load the image to your phones internal storage and flash your micro sd card. Enjoy!
Any Help plz ... 🙏🏼 I'm getting authentication attempt message , where I asking me for the username & password . Along with algorithm negotiation fail. I'm trying to do this on my RG503
@@MashTec Thank you for the reply! I haven't installed anything on this device its stock . Unfortunately its giving me the same message . Algorithm negation fail , along with authentication attempt. Could it be my device has something wrong ?
@@pablodasilva7925 Hi Pablo, i don‘t think it‘s a problem with your device. Unfortunately i don‘t own a RG503, so i can‘t try the login my own. maybe it requires to enable the ssh services first in the menu? I‘m stepping a bit in the dark here :(
@@MashTec Totally understandable Mashtec.. I will definitely be looking into that . If it continues to give me issues I'll just have to do it through a friend's p.c . No worries & thanks again for Replying greatly appreciated
Love all your videos. I have a rg350p that went dead due to being left on . Now it will not show any ROMs on the emulators. I have tried resetting but no luck. Can you please help me.
Hi Jason, i‘m sorry to hear that :( So you system still runs fine, just your roms are gone? That‘s a bit weird. Can‘t explain why just the ROMs are gone. But let‘s try to find out :) Can you connect the SD card to your PC or browse it from your smartphone and check the Roms folder? What firmware are you running? Stock or any custom fw?
Hi whenever I tap on the folder symbol it says authentication attempt and won't accept the password emuelec but I am using a rg353p could that be the problem
Hey guys, sorry for the late reply. The password "emuelec" only works with the stock firmware. If you‘re running on a custom firmware the password will be different. May that be the case for you guys?
Awesome tutorial, thanks, stops me borrowing the wife's windows 10 laptop/constantly eject the Sd card. Quick question though, I'm using ArkOS so what would the username and password be for the FTP app? Thanks!
Hi dude, yea the method actually works for any device with WiFi and ssh access. You can transfer any kind of data: Games, Videos, Music, Pictures…whatever ;)
Hi dude, authentication credentials are based on the firmware you use. Different firmware/OS have different credentials. What OS are you running, maybe i can find out the credentials for you.
@@jaysonocampo6472 oh ok, yea that one doesn’t have the ssh service available. So ssh login is not available unless you use a custom firmware. Maybe there is a way to activate the ssh services manually, but i don‘t have the device to figure it out :( Sorry i don‘t have a better answer for you.
Hmm, you are using the correct credentials. That's strange. Are you runni gon the stock firmware or some custom firmware? Are you doing this on a original RG351?
Hey dude, sorry to hear that the upload gets stuck. So you downloaded something to your phone and the upload to your RG351MP stucks, right? Do you get any error message? Maybe after some time?
That‘s weird. So this happens within andFTP? Do you have a stable WiFi connection? What protocol type did you choose for the connection? Please ensure you used SCP as protocol type and double check that you don‘t have a typo in the login credentials.
Sure my friend :) i also have a video for iPhone users, find it here: RG351 - Howto transfer Files/Roms using your iPhone - Guide (no PC needed) Enjoy!
Hey MashTec Nice Tutorial btw im at the andftp part and when i clicked the scp folder it says authentication attempt Can you please Help me? Im using a Rg353p
Hey dude, the RG353P requires different login credentials. I don‘t own this device, but you may try with the following login-data: login: root passw: linux I hope it works 🤞🏻
Hey, sorry it didn‘t work out. What firmware are you running on your RG353P? Stock or any custum fw? You may try the following credentials: login: root pass: admin or pass: anbernic
Hey dude, this method works with any network/WiFi accessible device. I don‘t have a RG353 to test, but it will work most likely. Do you have a device to test it? I‘d appreciate your feedback.
Will this work with the rg350m??? I've been trying to do this without pulling the sdcard I Kno "just pull the card" but I want to easily load and drop games on the fly
Yes, this method works with all RG-devices. For the RG-350M, all you need is a WiFi dongle. Take a look here if you need to know how to set it up: ruclips.net/video/BjJdRROJ1Mg/видео.html Enjoy!
Hey dude, thanks for the feedback. Let‘s find out what‘s going wrong here. So, the tethered connection got established between your phone and the RG351? And you are connected via AndFtp? So, the error message appears when you try to transfer a file?
Hey dude, sorry to hear. Does your hotspot provide a 5Ghz or 2.4Ghz WiFi network? Please note, that the RG351 can only connect to 2.4Ghz networks. You may have to provide this with your router. Good luck!
Hey dude, it depends what firmware you are using, but i expect you use stock emuelec. Therefor the login would be the following: login: root Password: emuelec Note: Go to the main menu and select EmuELEC Settings, Ensure "Enable SSH" is enabled.
Hi dude, what‘s not working for you? What device are you using? Please note, login credentials differ between devices and firmwares. Some firmwares even require to activate ssh service before you can use this method. Still, the tutorial should work for all devices supporting ssh login. Let me know you device and firmware, maybe i can help :)
@@MashTec After doing some research i was able to finally solve login and folder access issue. The tutorial makes it look simple but for average non-tech people it can be devastating.
@@Powerpacker07 The tutorial works for the shown device with the mentioned firmware exactly as shown in the video. I tried to explain the stuff as good as possible. Sorry you had troubles with it, but it seems like you are using a different device and/or firmware? May you like to share your solution with us? Would be highly appreciated :)
@@MashTec The App itself is almost perfect except for one issue. Google update its security policy yearly, so what works before may not work today. What works for me is to address the issue specifically. If one is having trouble on Login check your SD if its linux, ubuntu, windows-made. It can be quite confusing at first but its the O.S that determines your access. Also, theres an issue where folders are hidden because of G-policy. Well you can find your way around, just avoid deleting stuff as it may corrupt or damage your Emulator files.
Hey dude, let‘s find out what‘s going wrong there ;) 1. Did you choose SCP as file protocol? 2. What firmware are you running on your RG-device. Stock firmware or did you install any custom FW?
How can I do this on an iPhone
I got this covered here in another video. Enjoy! ;)
ruclips.net/video/q6L6W5ug4b8/видео.htmlsi=BgAw0Zfgb1QK2VsF
Great tutorial MashTec! Really appreciate the excellent and detailed instructions on how to install/transfer games from my cellphone.
Thank you my friend! Appreciate your feedback :)
thanksssss. it works. for anbernic rg353v user and pass for me was root and linux
Cool, i‘m glad it works for you and thanks for your feedback :)
How did you get the password?
@@joselopez-ov4jx I googled it and tried several ones. But for the same model it would probably be the same user and pass
@@joselopez-ov4jx hey dude, what device are you using and are you on stock or some cfw version? Maybe i can help.
My device is RG35XX H and using stock OS. Can you help me? It always says invalid credentials @@MashTec
Just wanted to give my thanks for this painless walkthrough and teaching me a little more about how to use these functions properly. Good stuff!
Thanks for your feedback my friend. I‘m glad it helped you ;) enjoy!
Hey guys, I tried to make this guide as clear as possible to you. Still, if you have questions about the process or any other feedback to me, feel free to leave a comment below. Enjoy!
How do I do it with a ps vita clone
@anarios-yx3cc hi dude, not sure what device you mean, but in general your device needs to run the ssh service, have wifi and you need to know the ssh login credentials. That‘s it.
This was very clear and I followed you step by step. Going to get my favorite arcade games now.
Thanks for your feedback dude, enjoy! :)
Cool, exactly what i was looking for ✌
Perfect Guide!
Thank my friend! I‘m glad it helps you ;)
Super cool Tutorial MashTec!!! As always :D
Thanks a lot my friend!
The rg351p has a USBC data port and a separate charger port. Can you just connect the RG to a phone with that instead of all this wireless technology?
Hi welcome back on the block !
Nice tutorial, glad to watch it
Hey Alex, great to see you too! How are you doing my friend?
Yes, it‘s good to be back. I really missed you guys.
Found a little time, so i decide to make a new video ;)
He's back 😁👌🏻 awesome video love the editing .
Thanks a lot my friend! Glad to see you here on my channel.
Thank you very much! your tutorial is very helpful!
Anyone know the login credentials for android 11 firmware? I have the rg353v
I have the same issuse
Hi I need help :(
I have done everything correctly up until 8:39 I tap on the Download folder but there are no .zip files it will only show picture files such as .jpeg .jpg .png .gif, how do i get it to acknowledge the .zip files?
I have the same..
@kamil T I was able to find the solution through a different video but I can't remember which one I'm sorry
Hey, you are back!
Goooorrddoooonn :) yes, kinda. I can‘t tell you when my next video will come, because i‘m still on limited time, but it feels good to be back for a video ;)
How‘s it going my friend?
Great tutorial 👍 !!!
Thank you..thank you..thank you..
I get lost at the "associated password" it doesnt connect to my game device
Thank you for the tutorial. I can't connect my RG351M with my smartphone. I found out, I have to enable remote services on my handheld with arkOS. Now it works. 😊
It works with PC either. ;)
Yes, if you use ArkOS, you need to enable the remote service first. And also, you have different login data. I should have mentioned that.
Still, i‘m glad you got it working for you my friend :)
@@MashTec I have arkos what's the log in data I need please
Hey dude, if you run on ArkOS the login is:
login: ark
password: ark
Enjoy!
@@MashTec my guy!
@@Hooleyboi26 haha, no problem dude :D you’re welcome!
Awesome and heplful, this will be a god send. No sd card either huh? Wow man. I haven't gotten my device yet, im about to get into retro gaming. I miss the classics. I dont have a pc and the whole process seemed kinda daunting, but not this. Ill be using your guide when i get to that point. Great video
I‘m glad you like the video. Enjoy the world of retro gaming my friend :) Welcome!
Thank you, getting my handheld today. i have a question about this, im using an anbernic device (rg-arc) would the password be the same (Root and Emuelec)? @MashTec
@@GameSlayer41781 Congratulations to you new device dude!
It‘s pretty new, i never had my hand on a RG ARC so far. I also did a research in the net with no success :( sorry, i have no help for you here.
Thanks man. No worries. I have a phone with an sd card slot. I could use it to transfer games and or cfw?
What about connecting them with a c to c cable?
@@GameSlayer41781 Yes, you can always use the sd card to transfer files from and to your device.
A USB cable connection requires support of a data-transmission protocol via USB. I doubt the handheld supports this unless it runs Android or someone writes a special driver for it.
How do you download psp games on rg351p without using a computer but smart phone
Thank you so much!
Welcome my friend!
I already turn on the hotspot but my anbernic wont connect
Hello just want to ask if how can i save and continue my games what i've play on this unit? Like RE3 Psp?
Hello my friend, yes you can.
Just enter the RetroArch menu at any time and safe the game at any state. Later you can load the state and continue seamlessly :) i hope that answers your question.
@@MashTec uhmm where i can see that menu ? I think i try that in times but once i off or change some games to play my game what i save was not continue or my save file was not there ... Do you have a video about on that unit how to save so everyone can see it specially me ? Because i was always stressed on that i really love to play RPG games but my effort was so useless when i did not save my game :( i wish you will help me
What if we don't have emu elec but have anberelec?
Did you ever figure out out bro ? Because this isn't working on my Rg503
Hey dude, sorry for being late. I didn‘t see your post.
Please try the following credentials:
login: root
pass: 351elec
I hope it works. Please let me know!
Can u also save the file from the anbernic to the android device, I don't have a computer and I want 2 transfer my files onto another microSD card
Thanks man
Why i cant connect anymore with my phone to the anbernic???
Excuse me sir, I already use hotspot but I can't connect to RG351p.
Maybe this is the reason:
1.I'm not using Wi-Fi hotspot (I can't find it). can you help me please...
It's ok to download ps1 and PSP games in anbernic rg351p?
Thank man, l was thinking to buy one, but l don't own a PC.
Hey dude, that‘s exactly why i made the video. To help out those who don‘t own a PC (most most people have a smartphone). Enjoy my friend!
@@MashTec is there a way to change the firmware using a smartphone?
Sorry my friend, AFAIK that‘s not possible.
Didnt work for super mario world
It can work on newly bought rg351p?
10:35 can you download emulator for anbernic rg35xx h too sir
Hi dude, this tutorial technically works for any device that supports WiFi with SSH connections m. You just need to login credentials to establish the connection. Unfortunately i don‘t own a RG35xx H. So i don‘t know the login data.
How can I find the login credentials
My anbernic is already on the way but I want to download psp and the Nintendo 64 emulator can you let me know if I can what are the credentials found if you know
We're are they supposed to be found
@@bulletobreratrey9108 I‘m sorry, hard to figure out the correct login credentials without the device. Maybe google can help: search for RG35xx H and ssh login or credentials. I hope you find it like that.
Awesome right!!! Keep up the good work.
Thank you! Whenever i find time, i will bring new stuff for ya ;)
I tried doing this on my ambernic rg355 h and it's giving me a authentication attempt error when I try to connect to the files on my arbenic? Can you help me out
Same 😞
Hi dude, you need to know the ssh login credentials (login/password) of this device. It depends on the firmware you run on it. Are you on stock or any custom firmware?
And what device model? I don‘t know any RG355H, you mean the RG35XX H?
Hello how can i know the ssh login credentials of rg35xxh. Im trying to do your steps. Please help out
@@cjespiritu1319 hey bro I wish I could help you but this comment old I don't have that system anymore sorry
I tried this on my Anbernic RG353P with ArkOS, but it's not working. 😢
Uploading the game failes ? Anyone know how to fix ?
@@basvanwensveen2306 hey dude, what error message do you get? What device and firmware are you using?
Best. Thank you
You‘re welcome. Enjoy!
Do you know if there is a way to flash the firmware without the need of a PC by using this technique? I want to install AmberElec if possible, or something similar/better.
Hi dude, yes you can. Take a look at "EtchDroid" in Google PlayStore. You may need an OTG USB to sd card adapter or use your internal slot (if your phones has one). Then load the image to your phones internal storage and flash your micro sd card. Enjoy!
Any Help plz ... 🙏🏼 I'm getting authentication attempt message , where I asking me for the username & password . Along with algorithm negotiation fail. I'm trying to do this on my RG503
Hi dude, see if i can help out. What firmware are you using? Are you running on stock or did you install any custom firmware?
Please try:
login: root
pass: 351elec
Let me know if it worked ;)
@@MashTec Thank you for the reply! I haven't installed anything on this device its stock . Unfortunately its giving me the same message . Algorithm negation fail , along with authentication attempt. Could it be my device has something wrong ?
@@pablodasilva7925 Hi Pablo, i don‘t think it‘s a problem with your device.
Unfortunately i don‘t own a RG503, so i can‘t try the login my own. maybe it requires to enable the ssh services first in the menu? I‘m stepping a bit in the dark here :(
@@MashTec Totally understandable Mashtec.. I will definitely be looking into that . If it continues to give me issues I'll just have to do it through a friend's p.c . No worries & thanks again for Replying greatly appreciated
will this work for batocera
Love all your videos.
I have a rg350p that went dead due to being left on .
Now it will not show any ROMs on the emulators.
I have tried resetting but no luck.
Can you please help me.
Hi Jason, i‘m sorry to hear that :(
So you system still runs fine, just your roms are gone? That‘s a bit weird. Can‘t explain why just the ROMs are gone.
But let‘s try to find out :)
Can you connect the SD card to your PC or browse it from your smartphone and check the Roms folder?
What firmware are you running? Stock or any custom fw?
Did you fix it im also having the same problem?
Mine won't do this get to the stage of file transfer then nothing says authentication error connection refused
Please help it's driving .e crazy
Hi whenever I tap on the folder symbol it says authentication attempt and won't accept the password emuelec but I am using a rg353p could that be the problem
I am the same..is there a solution
Same also
Hey guys, sorry for the late reply.
The password "emuelec" only works with the stock firmware. If you‘re running on a custom firmware the password will be different. May that be the case for you guys?
@@MashTec I'm running arkos on the 353m
@@MashTec what's the password for on the anbernic 353m?
Awesome video will this work on the RG503 ?
Yes, should be possible on any device as long as you have the login credentials.
Awesome tutorial, thanks, stops me borrowing the wife's windows 10 laptop/constantly eject the Sd card. Quick question though, I'm using ArkOS so what would the username and password be for the FTP app? Thanks!
Hey dude, for ArkOS it‘s gonna be
login: ark
passw: ark
Thanks for your feedback and enjoy your device my friend :)
Can you help me understand where my files are going once I upload to emulationstation
@@MashTec and how was it with Amber elec?
@@kamilt6298 Hey dude ✌🏻
For AmberELEC it‘s:
login: root
passw: amberelec
Enjoy my friend!
Just the video I needed!!Bit what's the password for the 353m?
Could this method work for a anbernic r35s or r36s? Also could this method be used to transfer video files?
Hi dude, yea the method actually works for any device with WiFi and ssh access. You can transfer any kind of data: Games, Videos, Music, Pictures…whatever ;)
Thanks dude
what do I do when the authentication doesn't work? it's not working for some reason
Hi dude, authentication credentials are based on the firmware you use. Different firmware/OS have different credentials. What OS are you running, maybe i can find out the credentials for you.
@@MashTecI have the same problem. I'm using the stock OS
@@jaysonocampo6472what device are you using? A RG351 with stock os?
@@MashTec Im using RG35XX H with stock OS
@@jaysonocampo6472 oh ok, yea that one doesn’t have the ssh service available. So ssh login is not available unless you use a custom firmware.
Maybe there is a way to activate the ssh services manually, but i don‘t have the device to figure it out :(
Sorry i don‘t have a better answer for you.
Whats the login credentials for rg355xx h its stock firmware i havent messed with anything just got it
Same issue but with rg35xx+
Im getting invalid credentials. When trying ive made sure root is username and emuelec is password multiple times.
After some googlefu I found that the password is 351elec. Idk if they changed it in a newer update or something but that password worked for me
Hmm, you are using the correct credentials. That's strange. Are you runni gon the stock firmware or some custom firmware? Are you doing this on a original RG351?
@@MashTec I ended up finding out the password was 351elec. Not sure what I'm running it's been a while since I used this thing
Linux password was working back then, but now its not. Did they changed it?
@@Powerpacker07 Hey dude, what firmware are you using? It depends on the system you run on it. Stock FW, ArcOS, JelOS,..?
@@MashTec batocera
@@Powerpacker07 hmm, then it should just be:
login: root
passw: linux
Downloading roms Technically isn't illegal but it's supporting the illegal act of the person reproducing the Roms. Dont worry y'all.
Is it definitely ok? I mean, cops aren't going to arrive at my door??😂
@@MsAnya26 cops probably dont have the time to go arrest someone for playing super mario bros anyways lol
Tax is Theft which is illegal so at this time who cares what is or isn't legal? USA sending tax money away like it's their person money
What if you can find the console or the game?
Hi!
Im using Arkos as my software and the username and password on the FTP app is not working. How to aquire username and pass for arkos?
Hey dude it‘s
login: ark
passw: ark
Enjoy my friend! :)
The username and password don't work. My firmware version is RG35xxH_V1.1.0
Hi dude, it's not that easy on a RG35xxH, but here you can find a guide to follow: github.com/DeenBaum/rg35xx-plus-wifi-ssh-guide/tree/main
Not connected to the rg350 folder on app
Root password doesn't work
Fantastic tutorial but it's not quite working for me on my RG351mp it's getting stuck at the uploading stage
Hey dude, sorry to hear that the upload gets stuck. So you downloaded something to your phone and the upload to your RG351MP stucks, right?
Do you get any error message? Maybe after some time?
@@MashTec I download to my phone and then when trying to transfer this to the rg351mp it just stays at uploading and doesn't do anything
That‘s weird. So this happens within andFTP? Do you have a stable WiFi connection? What protocol type did you choose for the connection? Please ensure you used SCP as protocol type and double check that you don‘t have a typo in the login credentials.
@@MashTec Yep have double checked and everything is correct. Will try with my tablet instead see if that makes any difference
Good idea dude! So you can sort out if it‘s a problem with your phone 👍🏻
Anyway to do this with iPhone
Sure my friend :) i also have a video for iPhone users, find it here: RG351 - Howto transfer Files/Roms using your iPhone - Guide (no PC needed)
Enjoy!
Will this all apply to the rg503?
Hey dude, i don‘t have the device to test it, but in theory yes, this should also work on any other device with wifi access. Enjoy!
Will this work for the rgb10 max?
Yes, should work the same way dude. Unfortunately i don‘t have a device to pre-test and confirm it.
Hey MashTec Nice Tutorial btw im at the andftp part and when i clicked the scp folder it says authentication attempt Can you please Help me? Im using a Rg353p
Hey dude,
the RG353P requires different login credentials. I don‘t own this device, but you may try with the following login-data:
login: root
passw: linux
I hope it works 🤞🏻
@@MashTecHey man i tried the login and password but its still not working do you know how to fix it?
Hey, sorry it didn‘t work out.
What firmware are you running on your RG353P? Stock or any custum fw?
You may try the following credentials:
login: root
pass: admin
or
pass: anbernic
Same issue for me! Running stock os rg35xx+
Can this work in rg350?
Yes it can, if you have a WiFi module installed.
Will this work on rg353p
Hey dude, this method works with any network/WiFi accessible device. I don‘t have a RG353 to test, but it will work most likely. Do you have a device to test it? I‘d appreciate your feedback.
Will this work with the rg350m??? I've been trying to do this without pulling the sdcard I Kno "just pull the card" but I want to easily load and drop games on the fly
Worked for me
Yes, this method works with all RG-devices. For the RG-350M, all you need is a WiFi dongle.
Take a look here if you need to know how to set it up: ruclips.net/video/BjJdRROJ1Mg/видео.html
Enjoy!
Thx guys just got a rg350m I Know I'm late but Im loving this lil metal box wish i brought sooner but could never justify the price
@@redvapez6771 That‘s totally fine. Welcome to the RG-family :)
The RG350M still is a very good device. You will love it! enjoy
This is the correct guide for the RG350M, sorry.
ruclips.net/video/ymhuU_8seXc/видео.html
The previous link i posted was for the RG351.
Can you just put sd card into phone and copy files over that way?
Hey dude, sure you could do that ;)
I keep getting an error transfer failed
Hey dude, thanks for the feedback. Let‘s find out what‘s going wrong here.
So, the tethered connection got established between your phone and the RG351? And you are connected via AndFtp? So, the error message appears when you try to transfer a file?
Works this batocera?
Does this work for dream cast roms ?
Sure, it‘s the same thing dude. Just copy it over to the right folder for the dreamcast roms ;)
Credentials incorrect. Please help haha
Doesn't connect with my hotspot ;(
Hey dude, sorry to hear. Does your hotspot provide a 5Ghz or 2.4Ghz WiFi network?
Please note, that the RG351 can only connect to 2.4Ghz networks. You may have to provide this with your router. Good luck!
@@MashTec Is there an alternate way to download roms for the RG351
for rg405m? password
Hey dude, it depends what firmware you are using, but i expect you use stock emuelec.
Therefor the login would be the following:
login: root
Password: emuelec
Note: Go to the main menu and select EmuELEC Settings, Ensure "Enable
SSH" is enabled.
@@MashTec doesnt work either. its android version.
Oh, i‘m sorry then. Unfortunately i don‘t own the device, so i can‘t check it.
No longer works, exhausted method or password no longer working
Hi dude, what‘s not working for you? What device are you using? Please note, login credentials differ between devices and firmwares. Some firmwares even require to activate ssh service before you can use this method. Still, the tutorial should work for all devices supporting ssh login. Let me know you device and firmware, maybe i can help :)
@@MashTec After doing some research i was able to finally solve login and folder access issue. The tutorial makes it look simple but for average non-tech people it can be devastating.
@@Powerpacker07 The tutorial works for the shown device with the mentioned firmware exactly as shown in the video. I tried to explain the stuff as good as possible. Sorry you had troubles with it, but it seems like you are using a different device and/or firmware?
May you like to share your solution with us? Would be highly appreciated :)
@@MashTec The App itself is almost perfect except for one issue. Google update its security policy yearly, so what works before may not work today. What works for me is to address the issue specifically. If one is having trouble on Login check your SD if its linux, ubuntu, windows-made. It can be quite confusing at first but its the O.S that determines your access. Also, theres an issue where folders are hidden because of G-policy. Well you can find your way around, just avoid deleting stuff as it may corrupt or damage your Emulator files.
This will not work for me at all
Hey dude, what‘s the matter? May i help you? What‘s not working here for you? :)
@@MashTec got it working now thanks for the hard work dude
Hey, that‘s great news :) i‘m glad you got it working. Enjoy!
I keep getting AUTH FAIL and invalid credentials.
Hey dude, let‘s find out what‘s going wrong there ;)
1. Did you choose SCP as file protocol?
2. What firmware are you running on your RG-device. Stock firmware or did you install any custom FW?
@@MashTec Yes, I did choose SCP as file protocol. The "Version" on my system information screen says 20210603. No custome firmware. Just the 351ELEC.
Hmm…351elec is a custom firmware and uses different credentials. In this case the login data are different.
Try:
login: root
passw: 351elec
@@MashTec It worked! Thank you very much!
You‘re welcome :)
Glad to hear that it‘s working now!
Can I send you my Rg351p so you can fix it for me. I have tried everything and the firmware downloads aren't working. I dont know what im doing wrong.
Hey dude, let‘s see if i can help you out. Contact me by my mail address. You find it on my channel page.