Transfer Print to a Tea Cup - Printec No Cut Waterslide Decal Transfer Paper (ENGLISH SUBTITLES)

In this video we present you one of our newest product - no cut waterslide decal transfer paper. This product differs from regular waterslide decal papers in that it does not leave a film behind. Since it only transfers the toner you don't feel any thickness on the print. With this paper you can transfer print onto various surfaces such as ceramic, glass, porcelain, metal, wood, artificial leather, stone etc. You can find all the information about the product and order online through the links below. Also below you can find a short written instruction.
Printec No Cut Waterslide Decal Transfer Paper:
printec-online...
Printec No Cut Waterslide Transfer Glue:
printec-online...
Application instructions:
1) Print on the glossy side of the paper in mirror mode
2) Cut the design with scissors so that at least 2-3 mm of space is around it
3) Place the cut design in warm water, wait for 15-30 seconds so that the two layers separate. Take out from the water after this and lay it onto a paper towel with the print looking down onto the paper towel
4) Put/brush the C type glue onto the object you want to print on
5) Quickly apply the transfer decal onto the object with the glue applied beforehand and slide out/take out the above paper
6) Use a squeegee to stick the transfer decal onto the object and squeeze out air and water bubbles.
7) Cure the object for 10-15 minutes with a 100 celcius degrees. If you are curing multiple objects in the oven keep them in for a longer time.
8) After objects gets out from the oven, let it cool to room temperature and then take out the thin film slowly and carefully. Then do a full curing again at 180 to 250 celcius degrees and for 10-15 minutes.
9) Don't touch the print after it gets out of the oven. Let it cool completely and your transfer is ready.