BMW 1 series E81/E82/E87/E88 HID retrofit bi-xenon installation video
HTML-код
- Опубликовано: 25 авг 2024
- In this video we have retrofitted a DEPO headlight, because the original headlights have a very hard sealant. And the DEPO unit is sealed with butyl, which is easier to open. This headlight is used in BMW 1 series E81/E82/E87/E88.
The retrofit with the Aharon bi-xenon projector gives a very good improvement in light output and looks!
So when you want a custom headlight with a better light output, don't hesitate and improve your BMW!
To order the retrofit kit, click here:
retrofitlab.co...
Any questions? Contact us directly!
www.retrofitlab...
Retrofitlab.com
Tolweg 2W
3851SK Ermelo
Netherlands
These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.
Should I use any adhesive to secure the shroud or projector as I’m thinking over time vibrations will cause them to loosen?
Although the centric ring fits very tight around the lens holder, in time with vibrations, there is a small chance that it loosens and falls off. So a tiny bit of adhesive is a good way to prevent it.
More than perfect.. 😍😍😍
Thanks, this retrofit does look really good :-)
On the video, is the shroud 3" diameter? and the lens housing 2,5" ? That's why you put black ring adaptor? Thanks
Correct :-)
Thats right, need lens adapter ring to shroud 3.0 inch
Bonjour Mr. Super vidéo. Je voudrais faire la même chose j'ai une passat cc 2011 .quelle lentille dois je prendre merci
Veuillez envoyer un e-mail à info@retrofitlab.com afin que nous puissions vous conseiller le bon kit.
Do you need to code em in now, will you have fault codes ?
Great work by the way
Thanks! Normally there is no need for coding because of the can-bus proof ballasts.
wow.. you guys are great.. love it😍😍😎🤘🤘
На форд фокус 2 2007 г ретрофита не видел)можно сделать? Вдруг понравиться кто купит)
thank you very much! 😎👍
how much is?
Needs a HID kit for bixenons?
No, you will need to install the Mini H1 bi-xenon projectors :)
The product is 2.5" for bmw e46? But it fits 1 series e87? thanks
Yes, 2,5 inch :) It will also fit the BMW E87
@@Retrofitlab what different?
can i ask which way to adjuct projector or it doesnt matter and you will adjust light later when its on car??? thank you
this can be done once the headlights are mounted onto the car. But please note, you do not have to put the glasses on the headlight yet
Hi, Is Depo a a good quality brand (aftermarket)? There is another better?
For retrofitting they are usually very good, because they are not very expensive and are sealed with butyl, which is easy to open :-)
How do you remove the chrome reflector bowl from the headlight if I wanted to paint this?
You need to completely unscrew the reflector part by turning/loosening the adjustment screws. And removing the ball joint from the headlight height adjuster. Usually not too hard, sometimes a bit of lube, heat or good pliers can help.
Is led kit easier? Do I need to drill the hole on the back of my headlight?
I saw a thread on 1 series forum about a guy doing led retrofit to his 128i. And it peaked my interest, as my halogens SUCK at night.
The LED kit is a little bit easier to install because you don't have a large ballast/starter to mount and you don't have the cables for the ballast going in/out the headlight for which you need to drill a hole.
@@Retrofitlab In terms of sheer light output, would you recommend the AtomLED X2 or the Primo Ultimo? Thinking of getting one for my 1-Series, torn which one to get.
@@stefanpetrov8 Based on light output, the Mini H1 Ultimo in combination with XB35 bulbs produce the highest light output.
@@Retrofitlab Are you guys planning on doing a video comparing AlphaLED vs AtomLED? Sort of like your video comparing the Ultimo vs Primo, or the one where you compare all projectors. I'm interested to see the differences between Alpha and Atom.
Is this about the same directions as for the e90 halogens?
Yes, but 'about the same' the headlights we have used are DEPO ones and easy to open because they are sealed with butyl. The OEM BMW ones are usually a bit harder to open.
Where do you mount the ballast? I the OEM location or somewhere else?
Where there is space, it doesn't really matter
@@Retrofitlab thanks! I sent a message to you on your site and your Instagram about another issue that’s holding up the install I am doing. Can you please review?
Well I can't do that anymore, I already got angel eyes and if I put this I wouldn't fit both 😂😂
It is an option to mount angel eyes on the chrome shroud :-)
What‘s the Name of the Tool in 1.24?
Thanks for sharing. For other tools check: www.retrofitlab.com/c/zoek.php?string=tool
How do you know what size projector to buy?
We have a database with information about a lot of headlights. Please send an email to info@retrofitlab.com if you want us to personally help you with picking the right products for your headlight.
@@Retrofitlab thanks! Just sent you an email!
@retrofitlab.com
Every time you make a video, you never show if you align low and main beam optically and how to do that.
Do you do that?
Because alignment can be done in several ways, and is a completely different process, we don't include it in our video's. But we can definitely make a video about it. It can be done by leveling the headlight and the beam on a workbench for example, but also by mounting them on the car and adjusting them on te car.
@@Retrofitlab It would be awesome to make a video of that. I am sure ppl would be curious to see how professionals do it!
Thanks for the response.