Thanks for the enlightening video 👌 question, do you think it is possible to do the same procedure but then putting the bubble hash to dry in a No Frost fridge (controlled temperature and RH / 4-6°C and 20% RH) for basically air drying Cheers from Italy ;-)
To a degree freezers lyophilize. We call this freezer burn. In fact we have data on the amount of water lost on our trays by simply sitting in a normal freezer. So you can remove some water this way but unlikely most of it.
@@SamboCreeckFiltration clear, thanks for the answer...my idea was to do this same procedure as yours and then put everything in the fridge (not freezer) to dry with ur and t check...trying to avoid microplanning or sieving the hash... meaning in your opinion? Ps Sorry for my bad english , i try to not use the translater 😂
Hi everyone and thank you for this video…at what temperature should I keep my jar with the Hash in the water? and how long can I keep my hash still wet for?
So I have a question that 25micron screen you are using is it reusable or is it a single use? I have found some that was 250$ for a 10yard roll but that would only be enough to cover my trays for two runs so a lil pricey if it’s only single use thanks guys great content!
The extra water from the ice is not what you have to worry about when you do jar washings with that much water lol, you can get that down a lot. Respect though love the vid :)
Any recommendations on avoiding patty collapse? This technique really suits my workflow but has not really been working that well for me vs traditional straight on the tray collection methods. I can’t seem to get the wicked material to dry correctly at all. I understand the theory is sound it just doesn’t seem to be working for me causing some substantial loss. I’m not sure I’m leaving enough interstitial spacing for proper sublimation
Are you pouring a wet patty or scooping like normal? You need a flat surface for everything to dry uniformly. Your FD settings or total dry time may be a factor.
@@SamboCreeckFiltration jar collection and pouring wet, pre freezing trays, followed the sop closely but not getting the results I was hoping for. Any insight would be appreciated
I’ll make a video next week that is more in depth. I think that will help. It may be a freezedrier issue which is something we haven’t even talked about but should.
@@SamboCreeckFiltration thank you tremendously. I would love to keep this process, but could probably use some clarification. I don’t believe that in my case it was related to the freeze dryer as my control trays dried fine but I would certainly still be interested in seeing the process in greater detail
Can elaborate on the question? The process is not freezing the hash, it's drying. The freezing is so we can turn water from a solid to a gas directly in the lyophilization process.
@@SamboCreeckFiltration I think what he what asking was why don't you use dry ice and trim in a 70 to 120 micron shaker bag to separate the trichomes without having to add water in the first place. No freeze-drying and no water needed. I must admit that I never cared much for the water-extracted stuff. Too much popping and sizzling. I don't notice this at all with the dry ice method.
Thanks for clarifying. In my experience kief typically has lots of biomass and stalks when extracted that way. Personally not a fan so that’s a personal preference.
@@335alien335 popping & sizzling means the work was not done, right! Dry ice is not consumable it’s not food grade and shouldn’t be used around or with any product that you plan to ingest into your body! Keefe can be shaken off of plant matter with a screen in a little bit of labor! Dry ice is basically poison
bro don't get on the wrong side of andrew! something in his eyes tells me you might find an unfortunate end if you disrespect him (obviously kidding, great vid guys i love watching this shit even though its gonna take me a while to be able to apply that knowledge)
@Gorge-wi5dn how tf u advertising drugs without even mentioning the country let alone the fucking continent youre from, if you want to be a drug dealer then fix your damn social anxiety and get out there. the fuck are you commenting under youtube shorts for?
I think this guy has been testing the final product.
His eyes give me killr vibes. Or hes just autistic and the nicest guy.
Final product😊lol! Indeed:)
Them eyes 😳
Bro is doing his best to force his eyes to stay open 😂he’s a champ for sure though and he’s good at what he does.
No shit
my bro is LOCKED IN 😂😂
He tested the stash....all of it!! Haha
Thanks for the enlightening video 👌 question, do you think it is possible to do the same procedure but then putting the bubble hash to dry in a No Frost fridge (controlled temperature and RH / 4-6°C and 20% RH) for basically air drying
Cheers from Italy ;-)
To a degree freezers lyophilize. We call this freezer burn. In fact we have data on the amount of water lost on our trays by simply sitting in a normal freezer. So you can remove some water this way but unlikely most of it.
@@SamboCreeckFiltration clear, thanks for the answer...my idea was to do this same procedure as yours and then put everything in the fridge (not freezer) to dry with ur and t check...trying to avoid microplanning or sieving the hash... meaning in your opinion?
Ps
Sorry for my bad english , i try to not use the translater 😂
Some of the best audio I've ever heard
Hit the donate button and buy us a mic.
i believe the input material determines whether its live rosin or not, not tray temps during freeze drying
Keeping it cold preserves more terps.
You can literally flash the pharma firmware onto the home freezer dryer no need to buy the pharma.
Hi everyone and thank you for this video…at what temperature should I keep my jar with the Hash in the water? and how long can I keep my hash still wet for?
As long as it has ice, you have the right temperature. You can keep it wet all day.
Awesome tech !! Thanks for the knowledge !! 🤙🤙
So I have a question that 25micron screen you are using is it reusable or is it a single use? I have found some that was 250$ for a 10yard roll but that would only be enough to cover my trays for two runs so a lil pricey if it’s only single use thanks guys great content!
Reusable. With care should last a long time.
@@SamboCreeckFiltration didn’t see your site ill definitally snag them from you guys when I finally pull the trigger on a freeze dryer!
This may be a really dumb question but is there a smell while freeze drying?
Title should be How not to make full melt. Lol
This is such important information. This guy is genius
There can only be one 🤡😆
@Paul better than you for sure
please make a video on hash collection into jars.
Done
Where would I buy this micron bags
The extra water from the ice is not what you have to worry about when you do jar washings with that much water lol, you can get that down a lot. Respect though love the vid :)
Any recommendations on avoiding patty collapse? This technique really suits my workflow but has not really been working that well for me vs traditional straight on the tray collection methods. I can’t seem to get the wicked material to dry correctly at all. I understand the theory is sound it just doesn’t seem to be working for me causing some substantial loss. I’m not sure I’m leaving enough interstitial spacing for proper sublimation
Are you pouring a wet patty or scooping like normal? You need a flat surface for everything to dry uniformly. Your FD settings or total dry time may be a factor.
@@SamboCreeckFiltration jar collection and pouring wet, pre freezing trays, followed the sop closely but not getting the results I was hoping for. Any insight would be appreciated
I’ll make a video next week that is more in depth. I think that will help. It may be a freezedrier issue which is something we haven’t even talked about but should.
@@SamboCreeckFiltration thank you tremendously. I would love to keep this process, but could probably use some clarification. I don’t believe that in my case it was related to the freeze dryer as my control trays dried fine but I would certainly still be interested in seeing the process in greater detail
Beautiful.
what does 305 s mean?
My hero
Nice. Thx for the info
You bet
Where do I get that size Sift screen
I think these guys had it made. I’ll check into it.
sambocreeck.com/products/tray-prep-screen-for-lyopilization?ToPasteboard
Dude looks high as a kite lol 😅
🙌🙌🙌
What is a home freeze dryer?!
Look at our website and search Harvest Right.
@@SamboCreeckFiltration yeah I know about those I thought there was a option smaller than a small pharmaceutical one xD was being hopeful lol
@@pixelghost914 yes there is. Harves right has small home versions. Check their website.
@@SamboCreeckFiltration ohhh thank you I checked smallest model I can see if a pharmaceutical model from there it’s just commercial size
Is it faster then 10mins?
I bet I could fully dry a kg in ten mins no heat involved
Why don't dry ice
Can elaborate on the question? The process is not freezing the hash, it's drying. The freezing is so we can turn water from a solid to a gas directly in the lyophilization process.
@@SamboCreeckFiltration I think what he what asking was why don't you use dry ice and trim in a 70 to 120 micron shaker bag to separate the trichomes without having to add water in the first place. No freeze-drying and no water needed.
I must admit that I never cared much for the water-extracted stuff. Too much popping and sizzling. I don't notice this at all with the dry ice method.
Thanks for clarifying. In my experience kief typically has lots of biomass and stalks when extracted that way. Personally not a fan so that’s a personal preference.
@@335alien335 popping & sizzling means the work was not done, right! Dry ice is not consumable it’s not food grade and shouldn’t be used around or with any product that you plan to ingest into your body! Keefe can be shaken off of plant matter with a screen in a little bit of labor! Dry ice is basically poison
bro don't get on the wrong side of andrew! something in his eyes tells me you might find an unfortunate end if you disrespect him
(obviously kidding, great vid guys i love watching this shit even though its gonna take me a while to be able to apply that knowledge)
@Gorge-wi5dn how tf u advertising drugs without even mentioning the country let alone the fucking continent youre from, if you want to be a drug dealer then fix your damn social anxiety and get out there. the fuck are you commenting under youtube shorts for?
Lol he on shrooms?
Yes you can eat 5 grams of shrooms and still make a good video.
Unintelligible audio
Sorry about that. It was a small room with lots of echo and 4 fans blowing full speed. Mute and enjoy. 😅
the worst hash i've ever seen
Nice skills!
where can I find The Paper screen 25 micron ? Thanks 🙏
They had it custom made.
sambocreeck.com/products/tray-prep-screen-for-lyopilization?ToPasteboard