Just did mine, if you have a couple extra pry tools it becomes a doddle, it took me 2 and a half hours, but had I used the tools from the beginning it probably would've taken me 1.5 hrs. I recommend using less than an arm's length for the bottom two, as I ran out of thread for the top for me (I joined some leftovers I had from the bottom and it worked out fine) Really really really fill in any concave bits with the tape, no matter how good your stitching is there will be a void if you don't Great vid, I'm gonna ask the seller I bought mine from if they do alcantara instead of suede, mine cost £12 on Ali
Would it look neater by taking the switches/trim off and tucking it behind then putting the trim over the top? Just curious, looking at doing this myself👍
the backside doesn't look like original Alcantara to me.... Are you sure it is not faux Alc, there is plenty out there. Looks good though and well installed
Thanks for sharing video about to be doing similar myself. Would you say its much easier to just take the wheel off and breaking down? Sepearate horn front trims etc
No problem! Id say if you can do, you'd probably get a better finish by taking it off and removing trims etc. However, its definitely possible to do with it kept on like I did in the video.
Hello, our cover is one template corresponding to a proper steering wheel, not universal,not one size fits all. Each steering wheel corresponds to a template. You need to make sure your steering wheel is the same as the one on the MEWANT website before order.
Hooked it up to the cigs lighter in the centre dash! I put a flat usb socket in there and then just pressed the wire into the gap. Doest look all that great during the day but once it gets dark it looks really good!
Yes, Alcantara is much better quality than Leather. It is softer, feels better when touching, more flexible and stretchable, but it is thinner than leather. So it is very popular with customers
![Megan Thee Stallion - Roc Steady (feat. Flo Milli) [Official Video]](http://i.ytimg.com/vi/HozPPyqW0dY/mqdefault.jpg)
Really cool...ive done that to my r53 and with black stiches is even better because you wont see any problem...
Just did mine, if you have a couple extra pry tools it becomes a doddle, it took me 2 and a half hours, but had I used the tools from the beginning it probably would've taken me 1.5 hrs.
I recommend using less than an arm's length for the bottom two, as I ran out of thread for the top for me (I joined some leftovers I had from the bottom and it worked out fine)
Really really really fill in any concave bits with the tape, no matter how good your stitching is there will be a void if you don't
Great vid, I'm gonna ask the seller I bought mine from if they do alcantara instead of suede, mine cost £12 on Ali
Well done. Looks much better. Better feel. Nice. 😊
Thank you :) Definitely feels better
Would it look neater by taking the switches/trim off and tucking it behind then putting the trim over the top? Just curious, looking at doing this myself👍
Been enjoying this chanel very much!
I appreciate that man, thanks!
the backside doesn't look like original Alcantara to me.... Are you sure it is not faux Alc, there is plenty out there. Looks good though and well installed
Bel lavoro! Peccato non si veda come lavori in certi punti complicati , però il risultato è buono👍🏻
Thanks for sharing video about to be doing similar myself. Would you say its much easier to just take the wheel off and breaking down? Sepearate horn front trims etc
No problem! Id say if you can do, you'd probably get a better finish by taking it off and removing trims etc. However, its definitely possible to do with it kept on like I did in the video.
@@RPHD26 thanks for coming back to me:) thats great cheers
Çok ilginç, demek süet direksiyon kılıfı da oluyormuş👍
How about the grip? Is it better ?
It will be good that you do a review video how this is looking so far, alcantara gets really nasty over the time
Its held up really well. Much better than the synthetic suede one I had previously. If you have insta I can send you a photo
Leather also looks like trash after a few months. The steering wheel will shine from sweat and dirt from your hands
then clean it ...@@666.RS.3
just scrub it with microfiber towel and it cleans it perfect
Perfect video I needed
Bro i know it’s random one however do u have any idea how to get rid of the keyless entry fault on dash
Just use thin red tape for centre line
got some red pin stripe left over from the diffuser, will use that good shout!
I just used electrical tape😂
Hello my friend! Nice work! Did you use the tape all over the steering from inside?
Should i disconnect battery for no possible air bag deploy?
No need unless you want to remove the airbag and steering wheel
Nica is it holding up?😀any new link for the real stuff?😀
How has it held up ? Still in good quality or faded and worn down?
Hello boss, is the steering wheel wrap a one size fits all or is it categorized by diameter.
Hello, our cover is one template corresponding to a proper steering wheel, not universal,not one size fits all. Each steering wheel corresponds to a template. You need to make sure your steering wheel is the same as the one on the MEWANT website before order.
Nice job
Thank you!
How did you wire that el wire?
Hooked it up to the cigs lighter in the centre dash! I put a flat usb socket in there and then just pressed the wire into the gap. Doest look all that great during the day but once it gets dark it looks really good!
How it it holding up ..is it better than leather ?
Yes, Alcantara is much better quality than Leather. It is softer, feels better when touching, more flexible and stretchable, but it is thinner than leather. So it is very popular with customers
@@mewant_official ok but its looks nasty grey ang not black in this video :=)
Good video 👍
Thank you!
Hello please can you let me know where you got the cover from. Thanks
If need steering wheel cover for other vehicles, you can also come to our store to pick.
Looks like poo poo