Got mine last week with the 13900kf. No fucking regrets whatsoever. Big upgrade over the 3090. Is it worth the money? Not exactly but it's not targeted at those who are complaining anyway.
Glad you have reviewed this GPU, quality as always. Finally got my ROG Strix 4090 OC, 13900k and ROG Thor 1200w Platinum II delivered early this week. Just waiting for my Cablemod 4x 8 pin to 16 pin cable to be delivered so I can set it all up. I'm not gonna bother with the janky adapter even without the melting issues as it looks straight up hideous.
@@AndroidPoetry Well when I pre ordered the Thor 1200w Platinum II a while back they poorly advertised it as ATX 3.0, when it's just ATX 3.0 ready with the x2 8 pin to 16 pin cable now included. I almost cancelled the pre order a week or so back when I found this out to look for a proper ATX 3.0 one but didn't want to ruin the chance of getting my 13900k sooner which I purchased with the PSU. There isn't that many ATX 3.0 PSUs out and It's not a big deal, the Cablemod cable will do the job and the PSU is plenty good enough.
@@RUFU58 Gaming mostly and a bit of office work. I know it's overkill and I could have probably got a 13700k for gaming but I work hard and earn well so like to treat myself. I game in 4K now with a 3080 Ti and 12900k so this should give me some more frames in the more demanding games. Plus I get a nice heater for the winter, win win 😂
Hi! See Tomshardware update: Rtx 4090 woes get worse: Native 12vhpwr/ Atx 3.0 reportedly melt as well. So, maybe the first burnt native connector/atx 3.0. I hope this is the only case :(
Hi Tom, great work as always… I actually just did a new build in the AP201 a month or so ago based on your original video. In depth, process driven, and thought through as always. Cheers
I went with the 4090 FE edition because I recently moved to the ASUS AP201 case. It is an awesome case - probably my favourite case since my very old Silverstone Raven RV02B
@@Shinjiki I have 6 Noctua NF A12x25 fans set at a constant rpm (not sure what - just below where they are audible from 2 feet away) (2 bottom intake, back and top exhaust) . Running Heaven Benchmark my 3800X cooled with an NH-U12A max temp on CCD is 62 C my 4090 founders - idles 32.5 hot spot 40.9 - Heaven Benchmark max temp 48.7. It gets a bit warmer playing games for hours maxed at 4k high frames, but I am not sure what its peak is as I don’t monitor it.
EK are producing a dual (front & back BOTH ACTIVE plates - so looks amazing from top and bottom with RGB) water block set for the RXT4090 founder's edition, called the "EK-Quantum Vector² FE RTX 4090 D-RGB ABP Set - Nickel + Plexi". Water blocks reduce the size of the card so that it would even fit in a small form factor case with a custom water loop, as well as gaining all the other water-cooling features (best possible temperatures giving the card the thermal headroom to CONSTANTLY boost to maximum speeds [so long as you also have a beefy PSU] in a way no fans would, silent running, reduced power passing through the card, greater stability and greater potential for future overclocking). The latest CPUs also run incredibly hot so benefit from water cooling, with the fastest DDR5 RAM also benefit from a water-cooling block as well. Could you please ask ASUS ROG is they will produce a Strix RTX4090 in partnership with EK so that it can be bought with the same front & back active water blocks, for the best performance whilst also fixing the "too big for the majority of cases" issue? I plan on getting a Cooler Master HAF 700 case and installing three 420mm radiators (top & side & bottom) which, when paired with the front two 200mm fans & rear two 120mm fans, should allow me to cool even super-hot gear to near room temperatures, I hope. I NORMALLY go for the ROG STRIX OC card for every graphics card I get, but having seen the results you got, unless ASUS produce a version which is full pre-water-locked (active plates on front and back) for sale, then I am going to just get the Founders edition and water block that instead. They should also consider changing to display port 2.1
The ASUS Thor power supplies are actually shipping with a 16-pin to 2x 8-pin cable which is still probably better than those ugly and dangerous Nvidia cables, but I'm waiting for my CableMod 16-pin to 4 x 8-pin PCI-e just for the extra redundancy. Also, why are you recommending over 1000w for 16 pin? Why would the type of cable matter? Unless overclocking I've heard 1000w is fine.
Length isn’t the issue it’s the card height. That card is 168 mm plus you need 32 mm to the glass for the stupid cable (unless you are waiting on the 90°) There was nothing wrong with the cable, kids were trying to shove them into cases that they didn’t essentially fit in
Doesn't look as good as the 30 series imo wish they had more interesting RGBs, it IS an ROG Strix so make it look like one for that price but I'm still hoping for a white version 👍
This isn't where the strix is special. It's cooler and OC performnace is with its 600watt bios. It's one of the few who do. True 600watts and actually utilizes it and gets a difference. Stock performnace across any of these cards is just varaince. Sometimes the strix will win sometimes the suprim x. Just the strix when OC def pushes ahead of the others. Same goes for the strix 4080 super which I have.
I had to modify my case a little to fit my Strix 4090. It would only fit vertically. AIO cooler in front blocked a horizontal mounting. I replaced my Strix 1080ti. 7 years run with that card. I hope I get similar milage out of this one.
I just picked up the Asus ROG Strix RTX4090 OC. Couple things I hate about it aestheticly. First thing i hate are the red & blue accents on the bottom. Luckily I will be mounting this horizontally so I won't see that crap. Second, I hate the ugly ass RGB diffuser on the right side. It's just an eyesore. If I can't turn it off with software, I will be taking it apart and disconnecting the rgb manually. By the way it fits in my inwin 303c case. But the glass side panel will not close. So, an angled cable adapter will be needed. There is probably .5 to .6 of an inch of clearance between the card and glass side panel. Who else agrees with me about my 2 dislikes of the card?
I hate the red and blue. I'm sorry... If a card can't fit in a case... and am forced to vertical mount... now you are forcing me to a red and blue colorway? Nah son. I'm not cool with that. It's not even a subtle red in blue. Not some red or blue tinted foil like effect... It's bold. The eye should have been an RGB element.
I have this card and love it. Got it on launch day. It’s the most well made card I’ve ever owned. Built like a tank and actually very beautiful when lit up and in the case.
@@winstonrhock9021 I got nothing against Asus, as most mobos and even my monitor I bought from them. But most of the time Asus is overpriced, just because of the brand.
@@nossy232323 not just the brand is much better for over clocking and it run cool and it got vapor chamber other video card use copper plate , so u pay what u get for me definitely get the strix
Also, Tom can you find out from Asus what the vBios update they put on the support site did? There was no changelog. Alloy said was “Version 1” and it was a vBios update for the 4090 Strix OC.
I think the Thermal Pads are the problem here.. they are super thick, and doesn't dissipate the heat properly. Should replace them with a much thinner pad just to see how much it differs.
All of the 4090’s are pretty much the same from a real world usage standpoint. Pretty much comes down to which one you like the look of tbh. It’s kinda like a car model, you have a barebones and fully loaded version. Speed wise they are the same. One might be a few more fps on a chart but in real world gaming your not going to be able to tell the difference if one was a few more fps or not lol
I miss the RGB eye, they need to bring it back, but it looks great and original. I do not like the red and blue paint job. I do like the tuf cards, but I have a kind of a strix build.
Hi Tom where these test done with bar turned on in bios?? Wish you put it in the Helios case full rog build. Or at least do and post on your socials please. Also do you plan on water block graphics card test on this card would love to see charts or for a member on website to show I’ll keep a look out.
Hey dude, we used the same case and equipment for all the GPU reviews so its fair. It is a proper review and not a build afterall. ROG will be rotating the card to other media so Im not allowed to strip it down sadly :(
I wonder if the Strix fits in my unorthodox Lianli desk DK-04. I actually tried to measure the clearance. Think it would fit within mm's of free space after
Clearly don't like the look. The 30 series is the best one so far imo, especially the white version. The price is insane as well. I love ASUS products but I'm seriously thinking of skipping their 40-STRIX card. Might go MSI Suprim X this time!
I've been looking for this card or the Suprim X since launch. With the news about the new AMD cards, hopefully the scalpers will turn there attention to team red
@@NoSend901 Man... same here. I'm looking daily and cannot find a retail 4090. It's all scalper nation everywhere. What doesn't help are Nvidia limiting their release while influencing the 30 series sell... I am willing to go team red only if the 7900 xtx performance beats the 4090. I want what's best, regardless of the company. Worst case, I'd wait for the inevitable 4090 ti or maybe even the 5090 in 2 or so years.
@@NoSend901 Aye! Just saw the AMD show. The 7900 XTX aims at the 4080 performance wise. The 4090 is pretty much the top of the line! I just hope the availability will improve and fast !
I hate the fact that it has red and blue accents the ROG line is supposed to be plain black or black with hints of silver (except for the white editions and limited edition variants) and all the colouring is supposed to come from the RGB lighting alone but this gen they went with a police siren look and I hate that I like the ROG Strix 3090 design better than the 4090 and when I say that its just the colour mostly not the actual design
Have one. Would trade for white version in a heartbeat. Don't recommend over FE. Bought for OptimusPC waterblock compatibility and case compatibility (it's slimmer than the TUF)
I just bought the white one. Looks amazing.. Cost $2000 USD. My case is black and all my components inside are white. Its a Lian Li O-11 Dynamic Razer edition.
Owning one myself I’d say I don’t like the power plug the most , it’s crap position wise , almost deliberately awful. Also the mounting bracket should be full ditch as it is a heavy card I’d also say the 4 into 1 adaptor is shite as well for a £2500 gpu, I’d have expected a better power cable. Evga seems to be the on,y gpu maker who thought about the power plug and they ain’t bloody making one now…. I so wish Asus would think that little bit deeper about the whole card , not just 95% of it sadly which is what they did The blue and red on the blower side also isn’t for everyone. The build quality is great , it’s quiet and it’ll sit at 3045 MHz all day at 65degC so I’ve clearly got a decent result in the silicon lottery but that power laugh position is a dog , a total dog
yeah I hate that this is not plain black or black/silver like the NORMAL ROG Strix cards usually are (except the white edition and special edition cards). I want a plain black one not one with blue and red plastered on it unless I want a blue and red theme and only that theme I do not want that colour theme plastered on one of my PC parts especially since I don't really want that theme and want most of my colouring in the setup to be done solely by the RGB lighting alone because that way I can change the theme if I really want to
Does anyone know how much the stand thing extends to ? planning a build using a Corsair 7000D case and worried the distance from the underside of the GPU and the top of the PSU shroud will be too far for the stand included with the 4090 strix, Cheers 🙂
first time i go Tuf over strix... that plexi at the end just gives cheap look.... still struggling with a 1060, i'll take the unicorn puke any time.... :P
Trust Tom to show this card off properly! I've changed my mind: if I were buying, the aesthetics (Apart from the IO plate) would swing it for me over the Suprim. Asus might still get my pennies; but Ngreedia + price? Nope, I think I'll be on the Radeon train.
Benchmarking this with such an inferior cpu makes 0 sense sorry to say. But the bemchmark cpu needs an upgrade asap. Because your data is very different from other testers 😕. Clearly cpu bottleneck
Its what we have tested all the old GPU's on and we didnt have time to retest 20 GPU's before launch (takes almost a whole day per GPU) but there are plans in motion now :)
It won't fit in my case because they aren't even on store shelves.
Год назад
Would love to get a proper cable for my MSI 4090 Suprim X that would work with my Corsair HX1000i like the Corsair one if I only could find it in stock somewhere... Any suggestions?
@@OC3D Thanks Tom! I already checked CableMod but wasn't sure if they had a cable that would work with my Corsair HX1000i but will have another look 👍
Год назад
@@OC3D Found the 90 degrees adapter but the MSI 4090 wasn't yet on the compatibility list as far as I could see and also I wasn't able to find a separate cable such as the one from Corsair which isn't in stock over at Corsair and hasn't been for a long time now. You being the CableMod expert, did I miss a product that would work with my MSI 4090 Suprim and my Corsair HX1000i?
oh that's small, looks bloody good though but not worth the extra 500 quid and you still get that crap power lead,nvidia need too bin that connection off or send out a better lead too the ones who bought the cards
Wait a tic! My 4090/4080 didn’t fit in my mAtx cases! So I sent them back for a refund! Gonna skip this gen and AMD’s gen this time around! Cheers mate😊
Lol could they have made it any larger? 5080 will be the size of a suitcase. Crazy price too lol. All these OEMs became addicted to high covid/mining prices
I’d love to take that shroud off and paint it black like the 7900 xtx, get rid of that hideous blue & red these idiots put on their. And they should reseat the power connector at the bottom that fits case grommets better at the bottom of the GPU line the EVGA card on a true vertical mount (thermaltake tower 900 is a perfect example to avoid GPU sag.)
WHITE STRIX RTX 4080/4090 JUST ANNOUNCED!!
It looks awesome! Yes, the red/blue sticker is gone and replaced by grey/silver. 😍
Got mine last week with the 13900kf. No fucking regrets whatsoever. Big upgrade over the 3090. Is it worth the money? Not exactly but it's not targeted at those who are complaining anyway.
Glad you have reviewed this GPU, quality as always. Finally got my ROG Strix 4090 OC, 13900k and ROG Thor 1200w Platinum II delivered early this week. Just waiting for my Cablemod 4x 8 pin to 16 pin cable to be delivered so I can set it all up. I'm not gonna bother with the janky adapter even without the melting issues as it looks straight up hideous.
Spent all that money and didn't get a atx 3.0? lul
@@AndroidPoetry Well when I pre ordered the Thor 1200w Platinum II a while back they poorly advertised it as ATX 3.0, when it's just ATX 3.0 ready with the x2 8 pin to 16 pin cable now included. I almost cancelled the pre order a week or so back when I found this out to look for a proper ATX 3.0 one but didn't want to ruin the chance of getting my 13900k sooner which I purchased with the PSU. There isn't that many ATX 3.0 PSUs out and It's not a big deal, the Cablemod cable will do the job and the PSU is plenty good enough.
Lucky! What do you use the system for?
@@RUFU58 Gaming mostly and a bit of office work. I know it's overkill and I could have probably got a 13700k for gaming but I work hard and earn well so like to treat myself. I game in 4K now with a 3080 Ti and 12900k so this should give me some more frames in the more demanding games. Plus I get a nice heater for the winter, win win 😂
Hi! See Tomshardware update: Rtx 4090 woes get worse: Native 12vhpwr/ Atx 3.0 reportedly melt as well. So, maybe the first burnt native connector/atx 3.0. I hope this is the only case :(
Hi Tom, great work as always… I actually just did a new build in the AP201 a month or so ago based on your original video. In depth, process driven, and thought through as always. Cheers
I went with the 4090 FE edition because I recently moved to the ASUS AP201 case. It is an awesome case - probably my favourite case since my very old Silverstone Raven RV02B
What kind of cooling are you using with the 4090 in the AP201? How are the temps?
@@Shinjiki I have 6 Noctua NF A12x25 fans set at a constant rpm (not sure what - just below where they are audible from 2 feet away) (2 bottom intake, back and top exhaust) . Running Heaven Benchmark my 3800X cooled with an NH-U12A max temp on CCD is 62 C my 4090 founders - idles 32.5 hot spot 40.9 - Heaven Benchmark max temp 48.7. It gets a bit warmer playing games for hours maxed at 4k high frames, but I am not sure what its peak is as I don’t monitor it.
EK are producing a dual (front & back BOTH ACTIVE plates - so looks amazing from top and bottom with RGB) water block set for the RXT4090 founder's edition, called the "EK-Quantum Vector² FE RTX 4090 D-RGB ABP Set - Nickel + Plexi". Water blocks reduce the size of the card so that it would even fit in a small form factor case with a custom water loop, as well as gaining all the other water-cooling features (best possible temperatures giving the card the thermal headroom to CONSTANTLY boost to maximum speeds [so long as you also have a beefy PSU] in a way no fans would, silent running, reduced power passing through the card, greater stability and greater potential for future overclocking). The latest CPUs also run incredibly hot so benefit from water cooling, with the fastest DDR5 RAM also benefit from a water-cooling block as well. Could you please ask ASUS ROG is they will produce a Strix RTX4090 in partnership with EK so that it can be bought with the same front & back active water blocks, for the best performance whilst also fixing the "too big for the majority of cases" issue? I plan on getting a Cooler Master HAF 700 case and installing three 420mm radiators (top & side & bottom) which, when paired with the front two 200mm fans & rear two 120mm fans, should allow me to cool even super-hot gear to near room temperatures, I hope.
I NORMALLY go for the ROG STRIX OC card for every graphics card I get, but having seen the results you got, unless ASUS produce a version which is full pre-water-locked (active plates on front and back) for sale, then I am going to just get the Founders edition and water block that instead. They should also consider changing to display port 2.1
The ASUS Thor power supplies are actually shipping with a 16-pin to 2x 8-pin cable which is still probably better than those ugly and dangerous Nvidia cables, but I'm waiting for my CableMod 16-pin to 4 x 8-pin PCI-e just for the extra redundancy. Also, why are you recommending over 1000w for 16 pin? Why would the type of cable matter? Unless overclocking I've heard 1000w is fine.
Length isn’t the issue it’s the card height. That card is 168 mm plus you need 32 mm to the glass for the stupid cable (unless you are waiting on the 90°) There was nothing wrong with the cable, kids were trying to shove them into cases that they didn’t essentially fit in
Doesn't look as good as the 30 series imo wish they had more interesting RGBs, it IS an ROG Strix so make it look like one for that price but I'm still hoping for a white version 👍
I have a corsair 5000D so will have no trouble fitting 1 though no chance of convincing the MRS to get 1
Vertical mount has entered the chat....
This isn't where the strix is special. It's cooler and OC performnace is with its 600watt bios. It's one of the few who do. True 600watts and actually utilizes it and gets a difference. Stock performnace across any of these cards is just varaince. Sometimes the strix will win sometimes the suprim x. Just the strix when OC def pushes ahead of the others. Same goes for the strix 4080 super which I have.
good lord... the fingerprints on the front of that case 🤣
I got mine a week ago. Its really an ice cold gpu. The temp during stress test was only around 52C (after fan curve adjustment)
That's amazing bro. That's near to custom loop temps.
coil whine? plz lmk
This is the one we've been waiting on! Thank you, Tom...🇺🇸 😎👍☕
I had to modify my case a little to fit my Strix 4090. It would only fit vertically. AIO cooler in front blocked a horizontal mounting. I replaced my Strix 1080ti. 7 years run with that card. I hope I get similar milage out of this one.
I use a Corsair 1200 wat PSU and the corsair cable. I really love the card.
I just picked up the Asus ROG Strix RTX4090 OC. Couple things I hate about it aestheticly. First thing i hate are the red & blue accents on the bottom. Luckily I will be mounting this horizontally so I won't see that crap. Second, I hate the ugly ass RGB diffuser on the right side. It's just an eyesore. If I can't turn it off with software, I will be taking it apart and disconnecting the rgb manually. By the way it fits in my inwin 303c case. But the glass side panel will not close. So, an angled cable adapter will be needed. There is probably .5 to .6 of an inch of clearance between the card and glass side panel. Who else agrees with me about my 2 dislikes of the card?
Great review mate 🎉
Thanks! 👍
Would have liked a comparison between strix and tuf
i like rog rtx 3000 series design more...
I hate the red and blue. I'm sorry... If a card can't fit in a case... and am forced to vertical mount... now you are forcing me to a red and blue colorway? Nah son. I'm not cool with that. It's not even a subtle red in blue. Not some red or blue tinted foil like effect... It's bold. The eye should have been an RGB element.
Man, you need to get laid or something. You sound completely miserable
Там ещё и белый цвет, считай что российский флаг 😊
The red and blue is terrible
It reminds me of Pepsi.
😂😂😂
Then don’t buy the card.
I have this card and love it. Got it on launch day. It’s the most well made card I’ve ever owned. Built like a tank and actually very beautiful when lit up and in the case.
May I ask, do you do teardowns of the cards? if so, how does the PCB compare to other brands?
my 4090fe did 2700/2715 outa the box, my buddys 4090 suprimX does 2775mhz and runs cooler hence the better boost bins
Great card, but they are asking way too much money for it compared to the other RTX 4090 cards.
Strix always costed more because it’s been one of the best ones to get
@@winstonrhock9021 I got nothing against Asus, as most mobos and even my monitor I bought from them. But most of the time Asus is overpriced, just because of the brand.
@@nossy232323 not just the brand is much better for over clocking and it run cool and it got vapor chamber other video card use copper plate , so u pay what u get for me definitely get the strix
Also, Tom can you find out from Asus what the vBios update they put on the support site did? There was no changelog. Alloy said was “Version 1” and it was a vBios update for the 4090 Strix OC.
I think rog rtx 3000 series looks better than rog 4000 series
I am looking forward to an ex factory watercooled 4090 ... and your review about it 🤩
Great job ❤
i need your opinion on which card gives more performance the Strix 4090 or the msi suprim x?
It really irritates me that they put the power plug on the front of the card.. WTF are they thinking?
I think the Thermal Pads are the problem here.. they are super thick, and doesn't dissipate the heat properly.
Should replace them with a much thinner pad just to see how much it differs.
Errrrr...... What problem?
Będę kupował w grudniu 7900XT pozdrawiam
Any updates on this build? Heard lots of stories about cables melting into GPUs
All of the 4090’s are pretty much the same from a real world usage standpoint. Pretty much comes down to which one you like the look of tbh. It’s kinda like a car model, you have a barebones and fully loaded version. Speed wise they are the same. One might be a few more fps on a chart but in real world gaming your not going to be able to tell the difference if one was a few more fps or not lol
it all comes down to which one is in stock near you XD...for me it was the Tuf Gaming OC
Not really but ok
I have a Corsair 7000x rgb so the big card is np and is actually welcomed to fill out the case more. Looks just right in my build
Vertical or horizontal mount?
Would love to hear how well those fan headers work.
Fits in a Lian Li Lancool ii Mesh Performance Case, with a Noctua NH-D15 CPU cooler
I really like how this card looks
girth and massive opening, we still talking about the gpu lol
I miss the RGB eye, they need to bring it back, but it looks great and original. I do not like the red and blue paint job. I do like the tuf cards, but I have a kind of a strix build.
i still like the 30 series version of the strix but if they made a white version of this one i'd be quite interested
Hi Tom where these test done with bar turned on in bios?? Wish you put it in the Helios case full rog build. Or at least do and post on your socials please.
Also do you plan on water block graphics card test on this card would love to see charts or for a member on website to show I’ll keep a look out.
Hey dude, we used the same case and equipment for all the GPU reviews so its fair. It is a proper review and not a build afterall. ROG will be rotating the card to other media so Im not allowed to strip it down sadly :(
I think the ASUS generally have quite a low factory OC compared to others. MSI have always been quite aggressive with OC out of the box
Wrong, msi gets bigger clocks because it’s an AIO.
I wonder if the Strix fits in my unorthodox Lianli desk DK-04. I actually tried to measure the clearance. Think it would fit within mm's of free space after
I know I'm late on this, but do you think this card will fit inside a CORSAIR Crystal Series 680X RGB??
Love the GPU but can we disable the lights at the end of the card? If I were to get it I would prefer those lights off and just the ROG lights on.
All RGB can be switched off of course.
That's the one from your room!
Clearly don't like the look. The 30 series is the best one so far imo, especially the white version. The price is insane as well. I love ASUS products but I'm seriously thinking of skipping their 40-STRIX card. Might go MSI Suprim X this time!
I've been looking for this card or the Suprim X since launch. With the news about the new AMD cards, hopefully the scalpers will turn there attention to team red
@@NoSend901 Man... same here. I'm looking daily and cannot find a retail 4090. It's all scalper nation everywhere. What doesn't help are Nvidia limiting their release while influencing the 30 series sell...
I am willing to go team red only if the 7900 xtx performance beats the 4090. I want what's best, regardless of the company.
Worst case, I'd wait for the inevitable 4090 ti or maybe even the 5090 in 2 or so years.
@@starfuxer the new AMD cards are slower than the 4090, hopefully Nvidia will release more cards with the new AMD cards coming out
@@NoSend901 Aye! Just saw the AMD show. The 7900 XTX aims at the 4080 performance wise. The 4090 is pretty much the top of the line! I just hope the availability will improve and fast !
@@starfuxer Also, we have a 99% chance of a white Strix in the near future
Cool beans Thanks Guv!
I hate the fact that it has red and blue accents the ROG line is supposed to be plain black or black with hints of silver (except for the white editions and limited edition variants) and all the colouring is supposed to come from the RGB lighting alone but this gen they went with a police siren look and I hate that I like the ROG Strix 3090 design better than the 4090 and when I say that its just the colour mostly not the actual design
I realize these bigger cards "might" fit in a lot of mid sized cases, but at over $2000 Canadian for a 4090, it's too expensive for a "might".
I just returned my corsair 5000D. Realized this barely fits.
i just had to bend my case to fit a 3060ti strix imagine this
not crazy about strix in this gen, liked the 30 series more than this one - also not convinced about the new graphs style.. still…
a better question would be will it fit for ur pocket
Have one. Would trade for white version in a heartbeat. Don't recommend over FE. Bought for OptimusPC waterblock compatibility and case compatibility (it's slimmer than the TUF)
I just bought the white one. Looks amazing.. Cost $2000 USD. My case is black and all my components inside are white. Its a Lian Li O-11 Dynamic Razer edition.
if you like coil whine then its a perfect card
Can you do a video on vertical mount recommendations because I think I’m going to have to mount it that way because the side power wires.
I dare you to do a vertical mount of that brick!
Over clocking is where this shines. Stock, not that impressive except for the noise levels.
Owning one myself I’d say I don’t like the power plug the most , it’s crap position wise , almost deliberately awful.
Also the mounting bracket should be full ditch as it is a heavy card
I’d also say the 4 into 1 adaptor is shite as well for a £2500 gpu, I’d have expected a better power cable.
Evga seems to be the on,y gpu maker who thought about the power plug and they ain’t bloody making one now….
I so wish Asus would think that little bit deeper about the whole card , not just 95% of it sadly which is what they did
The blue and red on the blower side also isn’t for everyone.
The build quality is great , it’s quiet and it’ll sit at 3045 MHz all day at 65degC so I’ve clearly got a decent result in the silicon lottery but that power laugh position is a dog , a total dog
Can someone please give me the timestamp of the bit where the side panel was closed if there's one?
The old strix was way prettier imo. I would go for the tuf version. Keep up the great work bro and stay safe.
yeah I hate that this is not plain black or black/silver like the NORMAL ROG Strix cards usually are (except the white edition and special edition cards). I want a plain black one not one with blue and red plastered on it unless I want a blue and red theme and only that theme I do not want that colour theme plastered on one of my PC parts especially since I don't really want that theme and want most of my colouring in the setup to be done solely by the RGB lighting alone because that way I can change the theme if I really want to
Yeah, carry an umbrella so Covid doesn't get on you. Lame.
Hi I was wondering can someone tell me the name of the case in the beginning of the video with the tempered glass, very clean!
Just bought one finally
In the pursuit of PCMR, it irony that I cant fit my strix 4090 in my Lian Li PCMR case. WTH
how come rtx 4090 fe has better fps in control while clocked lower ? wtf
Does anyone know how much the stand thing extends to ? planning a build using a Corsair 7000D case and worried the distance from the underside of the GPU and the top of the PSU shroud will be too far for the stand included with the 4090 strix, Cheers 🙂
first time i go Tuf over strix... that plexi at the end just gives cheap look.... still struggling with a 1060, i'll take the unicorn puke any time.... :P
Trust Tom to show this card off properly! I've changed my mind: if I were buying, the aesthetics (Apart from the IO plate) would swing it for me over the Suprim. Asus might still get my pennies; but Ngreedia + price? Nope, I think I'll be on the Radeon train.
Oh my god... its a giant.
Will the Asus RTX 4070 dual fan fit H200??
the interface of the 4090 is very fragil. you should not rattle around with it in the case like this.
That’s pretty good for strix. There £2400 at OCUK
It looks fucking huge in the case.
Any idea if it would work with a fractal design torrent case?
Benchmarking this with such an inferior cpu makes 0 sense sorry to say. But the bemchmark cpu needs an upgrade asap. Because your data is very different from other testers 😕. Clearly cpu bottleneck
Its what we have tested all the old GPU's on and we didnt have time to retest 20 GPU's before launch (takes almost a whole day per GPU) but there are plans in motion now :)
Nice.. i need a card that fills up my Level 20xt
What are the fan headers for??
can i use thermaltake core p8 case with this huge graphic card?
I'm ok with the MSI....
Out of curiosity, is the Strix 4090 able to go with the ROG Z11
Of course not
Please make water cooled build in Louqe Ghost S1 case or LIAN LI A4-H2O A4 and please try EK Quantum Velocity AM4
It won't fit in my case because they aren't even on store shelves.
Would love to get a proper cable for my MSI 4090 Suprim X that would work with my Corsair HX1000i like the Corsair one if I only could find it in stock somewhere... Any suggestions?
CableMod
@@OC3D Thanks Tom! I already checked CableMod but wasn't sure if they had a cable that would work with my Corsair HX1000i but will have another look 👍
@@OC3D Found the 90 degrees adapter but the MSI 4090 wasn't yet on the compatibility list as far as I could see and also I wasn't able to find a separate cable such as the one from Corsair which isn't in stock over at Corsair and hasn't been for a long time now.
You being the CableMod expert, did I miss a product that would work with my MSI 4090 Suprim and my Corsair HX1000i?
oh that's small, looks bloody good though but not worth the extra 500 quid and you still get that crap power lead,nvidia need too bin that connection off or send out a better lead too the ones who bought the cards
But what case is that black one? Trying to see if the strix oc fits in a lian li o11 dynamic XL rog case
It would fit into the O11 easily.
Wait a tic! My 4090/4080 didn’t fit in my mAtx cases! So I sent them back for a refund! Gonna skip this gen and AMD’s gen this time around! Cheers mate😊
Are there any issues with the bend in that cable?
The only cable with bend issues that I know of is the adapter that comes with all of the cards.
No, but the 7900xtx will 😎
Unless Nvidia starts voiding warranties now for not using their Power adapter. 🤣🤣
Lol could they have made it any larger? 5080 will be the size of a suitcase. Crazy price too lol. All these OEMs became addicted to high covid/mining prices
the rgb on the card looks so goofy
Can this fit in a vetroo al-mesh 7C case?
My 4090 fit in my case with a 1/4 inch to spare lol.
Hello,
Would the Fractal 7 XL case able fit this card??
Ta😊
Easily
One of the reasons why I always buy the biggest cases. Got the Coolermaster Cosmos II
More RGB, please!
I’d love to take that shroud off and paint it black like the 7900 xtx, get rid of that hideous blue & red these idiots put on their. And they should reseat the power connector at the bottom that fits case grommets better at the bottom of the GPU line the EVGA card on a true vertical mount (thermaltake tower 900 is a perfect example to avoid GPU sag.)