This man is the GOAT!! I have turned to this man for all my problems with my Epson printers and everytime, he helped walk me through fixing my printers!!
Thx heaps, somehow the pin fell out but didn’t break. I managed to put it back in but still didn’t work, thanks to you, you showed me how to take the whole cartridge out, the little pin just needed expanding a little. 🌷
the link to the printer pins doesn't work or exist anymore. I looked also on your website and I do not see the pin replacements anymore. I have an Expson XP-7100 and want to purchase new pins so I can use aftermarket ink. Can you provide a resource on where to locate replacement pins?
refillable carts have chips you can swap out and there's 9 pins on each chip. in regards to wf-7820, how many of the pins are actually used on each chip? it doesn't look like all 9 of them are utilized, i'd like to find out which pins are important and which ones can be left out... i'm experimenting with something...
How do i get the chip assembley out to replace the chip connector, i cant get it out and you already had that part done im at a loss here. Please can you help me?
I have same problem with my epson 7880 it indicates no cartridge. How do I get access to install 7 pin chip in unit? Do I remove top from the back of machine? Any Help would be appreciated
I received my new chip in the mail and installed it, then started my printer. The whole casing that holds the board slammed to the left side of the printer inside and the screen said to turn it off. After turning it off, I tried turning it on again, but it did it again. Sounded like it was gonna break out of the whole printer. The only thing I did was replace the chip and put the cartridges back in. Do you know what's wrong with it? Thanks so musch!
Hello I have a WF-2860 which has a broken pin and I get the Cartridge not recognized error. I wasn't able to pull off the broken chip board. Is the procedure different on my printer? Thanks
Hello Kevin, thanks for the video, one of my pins was indeed missing, bought a new board from your suggested link, installed it, still getting the error message. Any suggestions?
I have a 7720 and wanted to use refillable ink cartridges because the epson ink is so expensive. I filled the yellow one just to test it and it says it doesn't recognize the cartridge. your thoughts?
Will this work with xp-830 swap swap to xp-820 Cartridge? My xp 820 died had to replace it with new one but did not realize the xp-830 i just brought doesn't take ciss well. Any ideas? Thanks
I'm trying to revive an Epson Stylus Photo 1400. It uses six cartridges, I can insert any combination of cartridges and they'll be recognized correctly and the printer will identify which one is/are missing. But when I insert the last cartridge, regardless of which one it is or its position, all of the sudden no cartridges are recognized. It circles through all positions as if by inserting the last one, none are recognized. All pins on boards look good. Printer was on storage for five years. It was all working but head was super clogged. I took head apart and soaked it in solution for a couple of days. After reassembling now it won't recognize cartridges if all installed. Any ideas ?
Hello even though the cartridges are being recognized.... will this stop the ink from printing on the pages? I'm getting blank pages i have replaced the printhead and did several cleanings still getting blank pages. Im just trying to see if there is a connections problem! I have the Epson WF-7720
It seems as if this is my problem but this video don't show us how to take it out. Is there a video I can watch so I can get to the point you are in this video (to be able to put the chip back in)?
@@BCHTechnologies thank you so much for this video and also replying back to me. I really do appreciate it. As I put it back it, it won't print now. Is there something maybe I did wrong?
Great video, Thank you for posting. Hi im from the UK This is exactly what has happened to my epson stylus r 360 black ink pin board which has broken . It has eight pins per board. Could you suggest where i could buy a replacement pin board for my epson r 360 any suggestions would be much appreciated . Thank You .
hi Kevin, I'm finding it difficult to pop out the 9pin cartridge on my Epson WF-2750. Does this model require any additional steps to remove the board?
Wiggle pin forward and backward (not up and down). The groves are not straight but a little zigzag if that makes sense. Same when putting new pin in. This worked like perfectly for my Epsom XP-446. Thanks so much Kevin!
Thank God I found you! I was afraid I have to buy a new printer! You just save me lots! Thank you very much for this video!
This man is the GOAT!! I have turned to this man for all my problems with my Epson printers and everytime, he helped walk me through fixing my printers!!
Thx heaps, somehow the pin fell out but didn’t break. I managed to put it back in but still didn’t work, thanks to you, you showed me how to take the whole cartridge out, the little pin just needed expanding a little. 🌷
Once again, Kevin is the BEST! You saved the last strands of hair I had left...THANK YOU!!!
Thank you, I'm glad I found this video I looked in my printer and saw one pin was missing, thanks to this video easy fix.
Thanks!
Welcome! Thanks for the donation!
You were the last best hope for my printer...great video
On the wf 7210 are the pins the same for each color
Which model of epson is this. I can't figure out how to take this out of my epson xp605.
the link to the printer pins doesn't work or exist anymore. I looked also on your website and I do not see the pin replacements anymore. I have an Expson XP-7100 and want to purchase new pins so I can use aftermarket ink. Can you provide a resource on where to locate replacement pins?
Will that work on a wf 7820.
You are the real MVP!!! Thank you! With your video I was able to fix my Epson WF-7720
Awesome! I am so happy that my video helped you fix your printer! Now, go print those masterpieces!
refillable carts have chips you can swap out and there's 9 pins on each chip. in regards to wf-7820, how many of the pins are actually used on each chip? it doesn't look like all 9 of them are utilized, i'd like to find out which pins are important and which ones can be left out... i'm experimenting with something...
The best! I thought I was going crazy lol 😂
The plastic prong that the cartridges slides down over broke. Is this going to cause printer not to work. I was replacing the pins.
How do i get the chip assembley out to replace the chip connector, i cant get it out and you already had that part done im at a loss here. Please can you help me?
I have same problem with my epson 7880 it indicates no cartridge. How do I get access to install 7 pin chip in unit? Do I remove top from the back of machine? Any Help would be appreciated
I received my new chip in the mail and installed it, then started my printer. The whole casing that holds the board slammed to the left side of the printer inside and the screen said to turn it off. After turning it off, I tried turning it on again, but it did it again. Sounded like it was gonna break out of the whole printer. The only thing I did was replace the chip and put the cartridges back in. Do you know what's wrong with it? Thanks so musch!
How do I change the pins on a 7820
Hello I have a WF-2860 which has a broken pin and I get the Cartridge not recognized error. I wasn't able to pull off the broken chip board.
Is the procedure different on my printer?
Thanks
Epson Sure Color F6280
Need help with this error, Cyan was not recognized even if I changed new chips.
what are the actual pin parts called?????..i need to search for new replacements.thank you
Csic assy chip reader
Hello Kevin, thanks for the video, one of my pins was indeed missing, bought a new board from your suggested link, installed it, still getting the error message. Any suggestions?
I have a 7720 and wanted to use refillable ink cartridges because the epson ink is so expensive. I filled the yellow one just to test it and it says it doesn't recognize the cartridge. your thoughts?
Email support@bchtechnologies.com.
Hallo dude, can i ask? is this the same problem as the epson f7170, how do you fix it?
Love that you have the movie Good Burger playing in the background.
Where is the link to replace the pins please epson r3000 please?
Will this work with xp-830 swap swap to xp-820 Cartridge? My xp 820 died had to replace it with new one but did not realize the xp-830 i just brought doesn't take ciss well. Any ideas? Thanks
I'm trying to revive an Epson Stylus Photo 1400. It uses six cartridges, I can insert any combination of cartridges and they'll be recognized correctly and the printer will identify which one is/are missing. But when I insert the last cartridge, regardless of which one it is or its position, all of the sudden no cartridges are recognized. It circles through all positions as if by inserting the last one, none are recognized. All pins on boards look good. Printer was on storage for five years. It was all working but head was super clogged. I took head apart and soaked it in solution for a couple of days. After reassembling now it won't recognize cartridges if all installed. Any ideas ?
this is exactly the problem i am having as well, new cartridges are not helping
@@tracyhack6266 hi i have thie problem, all cartridges error in my epeon wf7015 do u have a solution
Hi friend do u have solution ? I have this problem
Hello even though the cartridges are being recognized.... will this stop the ink from printing on the pages? I'm getting blank pages i have replaced the printhead and did several cleanings still getting blank pages. Im just trying to see if there is a connections problem! I have the Epson WF-7720
The blank page is caused by the air bubbles inside the cartridge. Do a few head cleanings and it should fix the problem.
Yes, I have done several cleaning, replaced print head and all! I’m confused on what’s going on and why it’s printing on the paper.
Will it work for Epson 1430 Artisan? It only has 8 pins? Do you know where to purchase 8 pin?
Can I do the same for my cannon ts6220?
It seems as if this is my problem but this video don't show us how to take it out. Is there a video I can watch so I can get to the point you are in this video (to be able to put the chip back in)?
Put your finger underneath the pin, and use your nail to dig it out. Once the pin is raised half way, jiggle it a little and it will come out.
@@BCHTechnologies thank you so much for this video and also replying back to me. I really do appreciate it. As I put it back it, it won't print now. Is there something maybe I did wrong?
Awesome, thanks for the quick solution, $10 part!
Where did you purchase the part?
@@toddf7950 Amazon
Did you still know the link to the part? I can't find it in Amazon.
Thanks!
should the printer be turned off to do this process?
How about epson wf7710?
Great video, Thank you for posting. Hi im from the UK This is exactly what has happened to my epson stylus r 360 black ink pin board which has broken . It has eight pins per board. Could you suggest where i could buy a replacement pin board for my epson r 360 any suggestions would be much appreciated . Thank You .
You’re amazing!! You’ve saved me so much money! ❤️
Hi there, I'm having trouble to fix the error 034503 on epson wf 7720dwf. Can you please help?
Hi Kevin I need 3 set of pins for my xp332 tryed everything to get then can you HELP please
Send an email to support@bchtechnologies.com
Mine just randomly stopped recogizing.
AHHHHHHH.......Thank you sooooo much, Kevin!!! Yes, very easy.
hi Kevin,
I'm finding it difficult to pop out the 9pin cartridge on my Epson WF-2750. Does this model require any additional steps to remove the board?
No, the same.
Wiggle pin forward and backward (not up and down). The groves are not straight but a little zigzag if that makes sense. Same when putting new pin in. This worked like perfectly for my Epsom XP-446. Thanks so much Kevin!
what happens when that does not work?
Hi Kevin is there a way to contact you?
I wish I could see how you got to this before you took it apart
Thank you for posting this. Very helpful! Can you tell me where I can find the link to purchase the replacement chip?
hello, did you use the link he provided to see if you can source the chip pinboard?
Bravo Sierra yes, I tried. It wasn’t a direct purchase link.
GREAT VIDEO!!! THANK YOU!! IT WORKED!!
will this chip work for my wf-7710 printer. I am missing a pin. Thanks
Did this work for your printer.i need one mine drop inside my printer
It worked for mine
Thank you!!
Great tip, thanks.
Soooooo helpful! Wow!
OK, I'll just nip into Wilko and pick up a new pin board then. Thanks for that.
YOUR PAGE IS ABOUT BUYING FROM YOU, NOT SETAILED INFO ON HOW TO DO WHAT YOU ARE LISTING.