Great video! A couple of comments: First, the connectors aren't snap-in only, you should tighten down the setscrew after inserting them into the track. Second, after cutting the track, the conductors have to be trimmed so that the anti-short tabs on the fittings don't push the fittings on the other end of the track out. Thanks for some great information and a well-presented video!
So there still is a good use for track lighting! This is a good solution for anyone removing it from their home's interior. If I was going to buy new lighting for a garage I'd just get some of the linkable LED lights that replace the old fluorescent tube lighting fixtures that used to be popular. Only about $20 per 3 ft section, (I used 6 sections), some connector wires to link them, and you're done for about $140.
If the existing ceiling junction box screws do not match up with new track plate what options do you have to install the plate besides rearranging the old junction box? Somethings are never easy but your video was nice.
Fan-Flippin-Tastic no nonsense, get your butt in there and do it demonstration! I got it on the first play through. Watched 20 more times just cause it's a master lesson in how to make this type of video! I'm putting this stuff up everywhere now!
As the lady stated, the rails have two metal strips on one side and just one on the other. Therefore, make sure the connectors, lights, rails, etc are all lined up by taking this into consideration. I did it the hard way and had to remove a rail and rotate it which is a nuisance when using toggle bolts.
Be sure when you connect most lights & appliances to the house the wire is most often aluminum on the appliance & or lights, So you're connecting it to the house wire which is copper.& needs to have a special grease called Nola Flex so they don't prematurely quit working. Otherwise they can expand & contract causing the two different materials to arc & corrode fast & then need be replaced. When you put the two aluminum & copper wire together in a wire nut, just squirt a dab of this Nola flex into the wire nut first & twist them on together..Another trick of the trade is if you're doing lighting or something outside, Before you wire nut the wires into a wire nut is you must first twist the wires together with pliers tightly & then squirt a dab of 100% silicone into the wire nut & tighten on the wires. This will help prevent water of touching the live wires & shorting out during a rainstorm or garden hose sprinkler..
Where I live, I have never seen aluminum wiring used for circuits like this. It is always copper. Aluminum cable is sometimes used to bring power to the service panel, but I never see it used for branch circuits.
I have this track lighting system. I watched this totally for the way to connect the floating connector to the track stick. I saw you had done it but it was covered by your hand. Couldn't see how you did it.
I do have a question... sorry if I come off too green but does it matter what lights you used for the track? can one buy a track and choose different lights or do the tracks come with their own lights and one must choose from that selection? Just curious... The reason I ask is because I like to change things up quit a -lot and if it is as easy as changing the lights oppose to having to change the entire system... well then that is right up my alley.
Does it matter which direction you turn the light to "snap" it in? You went counter-clockwise. Is that true in all cases? Can you go either way? Is it all tied to the specific producer? Mine came with very little instructions and doesn't cover this.
great video, one thing i noticed is that she doesnt explain how to connect the cut pieces. i looked at a few other videos and you have to bend the copper wire to connect with a special Track Conductor Bending Tool... the problem is i CANNOT find on for sale anywhere online in the US... that seems like the perfect Amazon item, but they dont seem to have a single one....or do these connect another way?
My track light Is pleasantly 110 v at this time but I want to know if I was to change it to 220 volts if it just a matter of changing the voltage and the bulbs or would I have to get a 220 volts track light ??
It depends on the product. Check the technical specification in documentation that came with your system or contact the manufacturer directly. Increasing output to any electrical item can be very dangerous if it isn't designed to handle it. Imagine all the bad things that could happen if part of the track started melting.
No doubt you were born for this. You are soy damn smart, beautiful and sexy... Love your voice and video. I usually use my grinder to cut because it's much faster and easier for me, but it was a pleasure watching your video. Good luck!
This is the only video that showed us how to put the light fixture in properly. THANK YOU
Thank you for watching!
She's amazing! Best video I've seen on this subject.
I love the succinct delivery and explanation for a number of issues someone might run into. Thanks
Loved this. So simple. Straightforward and to the point and informative. Thanks!
Great video! A couple of comments: First, the connectors aren't snap-in only, you should tighten down the setscrew after inserting them into the track. Second, after cutting the track, the conductors have to be trimmed so that the anti-short tabs on the fittings don't push the fittings on the other end of the track out.
Thanks for some great information and a well-presented video!
I wish my wife was like her; I would get so much done!
+Zone07 I think it would be the other way around :)
+Chris Mac touché
You said it man!
Lol
Excellent instructions. I needed lighting for a craft room and was tired of using desk lamps. This make more sense.
Teresa killed it. Best female dyi I've ever seen.
This was well done and a great idea for my garage.
The BEST info on track lighting for me!
Excellent guide. Now I am motivated to finish my project today !!!
Thank you so much for this! It was so amazingly helpful in our decision making process with the track lighting.
So there still is a good use for track lighting! This is a good solution for anyone removing it from their home's interior. If I was going to buy new lighting for a garage I'd just get some of the linkable LED lights that replace the old fluorescent tube lighting fixtures that used to be popular. Only about $20 per 3 ft section, (I used 6 sections), some connector wires to link them, and you're done for about $140.
Bravo! A very workmanlike presentation with all aspects of a typical installation covered and explained brilliantly.
Excellent, precise information given at the right pace with efficiency!
I really appreciate your professionalism. God bless you and your parents.
Best video on track lighting - such a pleasant voice, easily explained and not to mention, "easy on the eyes" Good job
Awesome, very clear, resourceful (reusing the cut parts) and smart (the part of mirroring in the floor what you want up in the ceiling).
She wears a cordless drill like no other. Reminds me of Crocodile Dundee, and she can say "No mate, THIS is a drill!"
Your video was clear to the point and easy to understand thanks
Such a great, informative video. The other videos on this type of track leave out all the details.
What a smart beautiful woman ! Love this!
Thanks so much. This helped me attach and install more track lighting.
Please wear safety glasses, doing it right is one thing but doing it safely is the most important thing. BTW, I'm impressed with your work.
If the existing ceiling junction box screws do not match up with new track plate what options do you have to install the plate besides rearranging the old junction box? Somethings are never easy but your video was nice.
And similarly what if the junction box screws are facing the wrong direction?
Fan-Flippin-Tastic no nonsense, get your butt in there and do it demonstration! I got it on the first play through. Watched 20 more times just cause it's a master lesson in how to make this type of video! I'm putting this stuff up everywhere now!
WOW She is great! Awesome job! Thank you.
Video is super old but still very helpful
As the lady stated, the rails have two metal strips on one side and just one on the other. Therefore, make sure the connectors, lights, rails, etc are all lined up by taking this into consideration. I did it the hard way and had to remove a rail and rotate it which is a nuisance when using toggle bolts.
How did she drill those holes into the sheetrock without getting sheetrock dust in her hair or eyes and on her shirt! She's good!
This really helped me! Thank you so much👌🏼
Can I install these on cathedral ceilings? And how 2
Be sure when you connect most lights & appliances to the house the wire is most often aluminum on the appliance & or lights, So you're connecting it to the house wire which is copper.& needs to have a special grease called Nola Flex so they don't prematurely quit working. Otherwise they can expand & contract causing the two different materials to arc & corrode fast & then need be replaced. When you put the two aluminum & copper wire together in a wire nut, just squirt a dab of this Nola flex into the wire nut first & twist them on together..Another trick of the trade is if you're doing lighting or something outside, Before you wire nut the wires into a wire nut is you must first twist the wires together with pliers tightly & then squirt a dab of 100% silicone into the wire nut & tighten on the wires. This will help prevent water of touching the live wires & shorting out during a rainstorm or garden hose sprinkler..
Where I live, I have never seen aluminum wiring used for circuits like this. It is always copper. Aluminum cable is sometimes used to bring power to the service panel, but I never see it used for branch circuits.
@@peteduncan921 Dave was saying you may be connecting the copper house wire to the aluminum wire that came on the lighting fixture.
Excellent video! I think I can do it!
It would have bern helpful if you noted the brand you were using.
Beautiful!
I have this track lighting system. I watched this totally for the way to connect the floating connector to the track stick. I saw you had done it but it was covered by your hand. Couldn't see how you did it.
liquid nails
What would be the max feet of the track lighting or max wattage?
Great video!
I do have a question... sorry if I come off too green but does it matter what lights you used for the track? can one buy a track and choose different lights or do the tracks come with their own lights and one must choose from that selection? Just curious... The reason I ask is because I like to change things up quit a -lot and if it is as easy as changing the lights oppose to having to change the entire system... well then that is right up my alley.
@suchaCaligrrl.. You can use a number of different light fixtures with track systems, they're very universal.
+UNDERNEATHHOUSE36 thank you for responding, I appreciate it.
I think I lost track of why I looked up this video in the first place. Wow.
Can I run leads right off the rails?
Does it matter which direction you turn the light to "snap" it in? You went counter-clockwise. Is that true in all cases? Can you go either way? Is it all tied to the specific producer? Mine came with very little instructions and doesn't cover this.
Great video and product...
How many head light can be installed?
great video, one thing i noticed is that she doesnt explain how to connect the cut pieces. i looked at a few other videos and you have to bend the copper wire to connect with a special Track Conductor Bending Tool... the problem is i CANNOT find on for sale anywhere online in the US... that seems like the perfect Amazon item, but they dont seem to have a single one....or do these connect another way?
thank you...on my way !
@0:44 this part is not incl. in the track light set I purchased. Duh. I need to get that separate?
Great tutorial!
Thank you
They don’t sell this in white anymore?
Sweet drill.
My box didn't come with instructions. Thank you!!
Great video just want I was looking for thanks!
What if the wires coming out of the box are red, white and a black wire that wasn’t used for the previous light
Where did you purchase the materials? I need to complete this exact thing in my garage too!
Very informative! She doesn't look like a Michael though 😂
My track light Is pleasantly 110 v at this time but I want to know if I was to change it to 220 volts if it just a matter of changing the voltage and the bulbs or would I have to get a 220 volts track light ??
It depends on the product. Check the technical specification in documentation that came with your system or contact the manufacturer directly. Increasing output to any electrical item can be very dangerous if it isn't designed to handle it. Imagine all the bad things that could happen if part of the track started melting.
What brand of track lighting is this?
We learned that yesterday
Where can I get that track lighting product?
BenevolentXMachine Contact us for track lighting: www.garnde.com
I would be wearing a pair of safety glasses specially when the work is overhead.
Great, Love this!
Nice video but why aren't you wearing safety glasses?!
shes badass
Still very beautiful!!! ❤❤
Mine still isn't working...
Easy tracking thank
...
Your awesome
❤❤
Quick Note: 1:25 the tracks ONLY come in 4' and 8' sections.
What do you mean by 1:25
Im in love
I didnt hear a word she said. She is beautiful.
but a 4" piece of track and 3 lights is $124 at Lowes...
Very helpful but wear safety glasses.
What if you don't have a green wire all I have is two extra red and two extra white
واضح جدا مع عدم وجود ترجمه ..شكرا لك
They didn't show her actually doing the cutting
No doubt you were born for this. You are soy damn smart, beautiful and sexy... Love your voice and video. I usually use my grinder to cut because it's much faster and easier for me, but it was a pleasure watching your video. Good luck!
Who puts track lighting in a garage
People that want to have kick ass garages
cutie...
she's a little too cute to be installing track lighting.
at 4:30 cut to a man finishing the cut
nice, DB.
Lol... she said less than $200. For all that track and fixtures. Lol