Land Rover Diff Overhaul - Pinion Bearing Preload Shims, Crown Wheel Mounting and Bearing fitting
HTML-код
- Опубликовано: 5 сен 2024
- In this episode we work out what is involved when setting the bearing preload. Shims are required and how it is set up is not 100% mathematical. We continue to mount the crown wheel and fit bearings to the planetary gear housing.
Thanks for this. As someone from the US (especially in my rural area), I have had to become my own trusted Land Rover mechanic. Your videos are the best I’ve found. I just want to encourage you to keep putting this knowledge out there into the world. It’s a greater contribution than you could ever know.
great video again Chris, really enjoying this series... good work.
Btw no one can go to the Moon. Ask Buzz Aldrin .. and I am serious. I am about to do my rear diff. I think the crown wheel has lost a tooth! I have to get this right, so very good video.
everything is so small... i envy the ease of this. im rebuilding an upgraded axle for my truck with a detroit. those ring gear bolts are 24mm, each one to 238Nm torque... and the pinion nut is 1 7/8" pulling that in and out to change shimms SUCKS
I'm not sure if you'll see this but I'm looking for the demensions of the shim ID and OD. Cheers
Cheers for that mate. Nice and clear.. hopefully one day i'll be able to give it a crack :)
great video chris :) i hate working on the new stuff myself
Quick question, I have a Salisbury rear diff On my Td5 100, It seems like when I let the clutch out in first as im pulling off the prop almost looks like its sticking a creates a shuddering in the jeep, What would you say this could potentially be either diff & transfer bearings could solve the problem or the Diff needs refurbishment? I really wouldn't know how to do what you're doing when it comes to preloading shims or working out the millimetres but also dont want to go out and spend £2,000 on a refurbed Salisbury rear diff if its just as easy as slipping out the bearings and putting new ones in? @Trailerfitter's Toolbox Videos
a beam defelction torque wrench will easily register 3nm
Thank you. Learned a lot.
Just a quick question, I just checked on-line at Brookwells Website and the Pinion Pre-Load Shims you have listed in the video ( all 20 or so FTC3869 to FTC3896). They appears to be none listed on their site. I currently have two Series 2A 109 Differentials to work on. I have replaced ALL the bearings and I cannot get the 90 ft-lbs of torque, the bearing binds up. I used the same spacers that came out but no luck. I have been reading that the bearings are never the same so they race can be .020" different easily. So that is my problem, but where else can I purchase these shims? So again, when I install everything and just a small amount of torque, all is good. Any good advice is greatly appreciated!
What would clearance be on a mitsi Evo 7 rear diff and centre diff ?
my defender 110 2.5 tdi the difflockR380 doesnot works the four wheels not engaged . what it has. please tell me im from Albania
the linkage is siezed where it connects to the box. It needs working free
So Does anyone know where I can buy any of these. I tried Brookwells and I was told they do't have any.
Alguien le paso que se bloquearon las ruedas delanteras de la nada. Se pudo romper el diferencial delantero. Es una discovery 96 TDI 2.5
Hi, I've got 87 110luk 2500 petrol defender. M52 engine if you want to help
would a flex type torque wrench not register 3nm?
Not sure the increments are that accurate TBH
Hi I have a freelander 2 2.2 td4e manual can I change the Propshafts bearings my self or do you have to buy a new Propshafts thank you
If you mean the prop shaft centre bearings then yes they are changeable.
ruclips.net/video/BQaiYDFbq5c/видео.html
I bet they can't get a freelander IRD pinion crush sleeve lol
Have you asked them?