Hey man. The thing he doesn't emphasise is the first nut on the front of the stem. He screws it out a bit but doesn't really say much about it. This nut is the key to fixing the wobble. Just screw it out a bit and then put the stem and clamps back. It will improve once you turn it out sufficiently. Just trial and error until you get it right
The thing he doesn't emphasise is the first nut on the front of the stem. He screws it out a bit but doesn't really say much about it. This nut is the key to fixing the wobble. Just screw it out a bit and then put the stem and clamps back. It will improve once you turn it out sufficiently. Just trial and error until you get it right. Once its right you won't have to tighten the clamps so much which good if you want to collapse the stem sometimes
Hey man. The thing he doesn't emphasise is the first nut on the front of the stem. He screws it out a bit but doesn't really say much about it. This nut is the key to fixing the wobble. Just screw it out a bit and then put the stem and clamps back. It will improve once you turn it out sufficiently. Just trial and error until you get it right
Hey man. The thing he doesn't emphasise is the first nut on the front of the stem. He screws it out a bit but doesn't really say much about it. This nut is the key to fixing the wobble. Just screw it out a bit and then put the stem and clamps back. It will improve once you turn it out sufficiently. Just trial and error until you get it right
upload a video where you can see how to change the tires of the kaabo mantis 8 electric scooter, it would be very helpful for the community mag-upload ng isang video kung saan maaari mong makita kung paano baguhin ang mga gulong ng kaabo mantis 8 electric scooter, kapaki-pakinabang para sa komunidad
What causes stem wobble is clamp creep. It is caused when the steering receives a jolt that puts high pressure on the rear of the clamp and it slowly inched upward in tiny increments until there is a space under the rear of the clamp and wobble occurs. I have a solution to this and I am working on the problem at present. There is another thing that can cause steering wobble the top bearing is loose in its housing. Use a Loctite product Retainingloc or Bearingloc.
I have also mantis 8 but i have light problem after 100km when i start give gas and run front light is start shining and also light button blue light is shining little what can be the problem can you help me there was no problem till 118km it happen in this morning
My kaabo Mantis 10 v2 stem clamp wont tighten enough to stop the wobble at the clamp. That's where the issue is. Waited a month only to have it arrive faulty.
Hey man. The thing he doesn't emphasise is the first nut on the front of the stem. He screws it out a bit but doesn't really say much about it. This nut is the key to fixing the wobble. Just screw it out a bit and then put the stem and clamps back. It will improve once you turn it out sufficiently. Just trial and error until you get it right
Hey man. The thing he doesn't emphasise is the first nut on the front of the stem. He screws it out a bit but doesn't really say much about it. This nut is the key to fixing the wobble. Just screw it out a bit and then put the stem and clamps back. It will improve once you turn it out sufficiently. Just trial and error until you get it right
I fixed this problem and since have been experiencing another one , the steering feels notched and isn't smooth , online it says you need to replace the steering bearing but there is 0 videos on how to do this , I'm thinking of selling it and getting something different all together
Hey man. The thing he doesn't emphasise is the first nut on the front of the stem. He screws it out a bit but doesn't really say much about it. This nut is the key to fixing the wobble. Just screw it out a bit and then put the stem and clamps back. It will improve once you turn it out sufficiently. Just trial and error until you get it right
wobbly af at the end lmao
Hey man. The thing he doesn't emphasise is the first nut on the front of the stem. He screws it out a bit but doesn't really say much about it. This nut is the key to fixing the wobble. Just screw it out a bit and then put the stem and clamps back. It will improve once you turn it out sufficiently. Just trial and error until you get it right
The thing he doesn't emphasise is the first nut on the front of the stem. He screws it out a bit but doesn't really say much about it. This nut is the key to fixing the wobble. Just screw it out a bit and then put the stem and clamps back. It will improve once you turn it out sufficiently. Just trial and error until you get it right. Once its right you won't have to tighten the clamps so much which good if you want to collapse the stem sometimes
Thanks man. You got discord so that we can communicate more on this particular fix to this issue?
Yeah sure. Anything I can do to help. I am so much happier with my mantis now it's sorted
Sorry but at the end of the process the stem was wobbling anyway. So I cannot see the real effect of the action?!
Hey man. The thing he doesn't emphasise is the first nut on the front of the stem. He screws it out a bit but doesn't really say much about it. This nut is the key to fixing the wobble. Just screw it out a bit and then put the stem and clamps back. It will improve once you turn it out sufficiently. Just trial and error until you get it right
Very useful. Just fixed my wobbly stem using the hex wrench. feel around first with your finger so you can tell where the hex nut is.
Eugene can you put subtitles please ??? Thanks 🙏 Riccardo
Mantis escooters need to make same forks like wolf king that be looking beast on mantis and next year they better make it without single stems
You need to get rid of this video doesn't fix them wobble, whenever I look up a way to fix it, I just keep getting this video
Hey man. The thing he doesn't emphasise is the first nut on the front of the stem. He screws it out a bit but doesn't really say much about it. This nut is the key to fixing the wobble. Just screw it out a bit and then put the stem and clamps back. It will improve once you turn it out sufficiently. Just trial and error until you get it right
upload a video where you can see how to change the tires of the kaabo mantis 8 electric scooter, it would be very helpful for the community
mag-upload ng isang video kung saan maaari mong makita kung paano baguhin ang mga gulong ng kaabo mantis 8 electric scooter, kapaki-pakinabang para sa komunidad
What language is this?
What causes stem wobble is clamp creep. It is caused when the steering receives a jolt that puts high pressure on the rear of the clamp and it slowly inched upward in tiny increments until there is a space under the rear of the clamp and wobble occurs. I have a solution to this and I am working on the problem at present. There is another thing that can cause steering wobble the top bearing is loose in its housing. Use a Loctite product Retainingloc or Bearingloc.
What to do to get rid of sten wobble?
I have also mantis 8 but i have light problem after 100km when i start give gas and run front light is start shining and also light button blue light is shining little what can be the problem can you help me there was no problem till 118km it happen in this morning
My kaabo Mantis 10 v2 stem clamp wont tighten enough to stop the wobble at the clamp. That's where the issue is. Waited a month only to have it arrive faulty.
Hey man. The thing he doesn't emphasise is the first nut on the front of the stem. He screws it out a bit but doesn't really say much about it. This nut is the key to fixing the wobble. Just screw it out a bit and then put the stem and clamps back. It will improve once you turn it out sufficiently. Just trial and error until you get it right
Please help mine have play in the steering like the steering don't move for a little distance of turning before it turns
Hey man. The thing he doesn't emphasise is the first nut on the front of the stem. He screws it out a bit but doesn't really say much about it. This nut is the key to fixing the wobble. Just screw it out a bit and then put the stem and clamps back. It will improve once you turn it out sufficiently. Just trial and error until you get it right
I fixed this problem and since have been experiencing another one , the steering feels notched and isn't smooth , online it says you need to replace the steering bearing but there is 0 videos on how to do this , I'm thinking of selling it and getting something different all together
can you please help i’m getting e 09
How did you remove Large stem bolt on the bottom? You did that so easily mines is super tight
Hey man. The thing he doesn't emphasise is the first nut on the front of the stem. He screws it out a bit but doesn't really say much about it. This nut is the key to fixing the wobble. Just screw it out a bit and then put the stem and clamps back. It will improve once you turn it out sufficiently. Just trial and error until you get it right
Saan po Made yan? Nd how much po?
Sir, tools 🛠 are included in every EKS purchased from your store? Thanks!
So short !