Something you guys didn't mention was the difference in sprockets. Most pro saws use rim sprockets, while most consumer saws use spur sprockets. Rim sprockets seem to last longer, less chain wear and are cheaper to replace. In fact sprockets are one of the few differences between the Echo Timberwolf and Echo's more professional saws. Good job. All the top brands make some good saws. I have went almost entirely to Echo, but have owned them all. Been cutting for near 50 years. Interestingly most residential framing contractors use Echo. Very durable and can take the abuse of many different personnel using them. Echo home owner warranty is 5 years. Other brands are more high performance and cut a bit faster. But they usually cost more.
I have a Stihl MS-391 with a 20" bar, Echo CS-490 with a 16" & 18" bar, Husqvarna 435 X-Torq with a 16" bar. I'm buying a Echo CS-590 Timber Wolf with a 20" bar this weekend to add to them. I am also considering buying a Husqvarna 450 with a 18" or 20" bar later this summer. I live rural outside a small Midwest town of 1,650 people. My house is surrounded by trees and I have a woods out back. Every time it storms something breaks off or comes down. I also use my saws at work in the maintenance department as well. We already tore up and wore out my old Poulan Pro 260 with a 18" bar and their Poulan 3314 with a 16" bar. I'm not messing with cheap saws anymore and only buy and use good ones. I buy them so they are mine and I can take them home anytime I want. They are cheap and would never spring for a good saw. Not like Menards where we have our corp account sells any good ones anyway. That would be Lowe's and Home Depot. I'm not buying anymore Poulan, Craftsman or whatever homeowner big box store cheap junkers no matter who's money it is.
I bought a Husqvarna 45 special back in1991 or so. I cut all my firewood with it and firewood for friends. I cut down many trees and it cut a lot fallen trees off my fences over the decades. It is always on the back of my side by side when we are on the trails as well. It has been a great saw for thirty years and i think it will last me many more. People are complaining about the "plastic" on the Husqvarna's but after 30 years of owning one i do not see a problem with it. For 99.5% of users it is more saw than they will ever need.
I never bought a gas chainsaw, when i was 15 i repaired 2 chainsaws, a stihl 010 av and a partner r17, built in the 60s and 80s, and since then they are running and running... old saws got so much power, and no safety :)
I have a lot of saws. Big, small, cheep, and expensive. And you definitely get what you pay for. I bought the 661 for the big timber but now I use it for everything. And the 20+ other saws just sit on my shelves.
I think as a homeowner it's better to buy something heavy duty and forget about it. Those big saws are designed for heavy use, and if you keep one around and only cut say once a month or so, that thing will last forever.
True, some of my saws are 20 years old, be sure and use non ethanol gas, that ethanol gums up the carb and eats rubber hoses. Hard learned and expensive lesson with my Stihl 660. I don't fall big timber too much and the saw sits for a few months sometimes Starbrite is an excellent fuel stabilizer, better than Sta-bil according to my mechanic, famous wrench who builds hot saws and racing snowmobiles in PNW. That residue has to be removed with ultrasound.
One of the biggest differences between pro models and consumer models is the power to weight ratio. Pro models are a bit lighter and a bit more powerful than the same number CCs in the comsumer models. Also Pro models are built with better materials and made to stand up to alot more steady use. I will always choose a pro model saw, even though I don't "need" one, because I like the better build quality and the perks of the pro models.
What comes to mind is that a lot more thought appears to have gone into the design of the professional saws. Things are suddenly in the right place, things make sense, things are convenient. There is no reason for a home owner to not enjoy all those same benefits. It was great to see a modest sized pro saw with all the nice pro features, without having to carry a 3 foot bar around. I like the 261C! :-)
I got a ms170 16 inch I use for firewood,milling lumber, cutting trees down it has plenty of power I love it no problems except the fuel and bar oil caps are cheap they strip out easily all for 170.00
Love the echo CS-590 Timberwolf. I use Stihl on my truck company at work and they are fantastic. I use Echo for my Lawncare equipment and have nothing but good things to say about them. The Stihl blowers are still a little bit better built. But the echo trimmers are far better, never have issues with echo start ups.
I had a Stihl FS-56 which I gave away and got an Echo SRM-225......way better. As for leaf blower I have a BG-50, so yeah I can relate to what you say.
I have a fair amount of wooded acreage and during good weather days I'm outside cutting trees and brush. I've been using an Echo CS-370 16" chainsaw for several years and it is an amazingly reliable saw. I've been cutting a LOT with it for 5-6 years and it never lets me down. But I cannot emphasize good maintenance whatever you run.
I asked my uncle, a retired professional timber faller. (He's 72 now, and started logging when he was 15) He used Stihl 40 years ago, but switched to Husky about 30 years ago and never looked back, because the Stihl wouldn't hold up. His current saw is a Husqvarna 372 XP, says it's the best saw he's ever owned.
I promise you there are more stihl's running today from that era than huskys. your uncle is seriously confused. huskys are awesome but never have they been more durable than stihl.
I considered myself a Stihl guy, but the other day I grepped a Echo CS-400 from Home Depot, it felt so good in my hand, I bought it ! I absolutely like it, it's my all around saw beside my MS-211, and my MS-271 !
I loved my new 271 Farm Boss but went to an echo dealer and bought a cs590 Timberwolf and it's hands down a better saw than the bigger more expensive brands. It's a beast of a machine. Cuts awesome and has so much torque that it totally impressed me to the point that I'm buying echo for now on when it comes to saw
Captive nut on a chainsaw is a novel concept and yet no one ever gives a second that humans had captive nuts all along as a masterpiece of engineering! Imagine every time you undid your fly you lost a nut!
Never shorten your chain if it has that much extra play in it it will wear your clutch drum sprocket out, you nerd a new chain. Use good heavy weight tacky oil to keep from stretching the chain. You can shake the bottle and if it sounds like water it is too light of oil. Best way to sharpen is a Stihl 2 in 1 sharpener. A good sharp chain is better than displacement. I cut 90% with a Stihl MS181C with a 16" bar. I also have a MS251C with a 18" bar for the bigger stuff but usually use the Smaller saw because of weight. I cut up about 40 ft of a 28" elm trunk in about 20 to 25 minutes with the MS181C.
I have 4 chainsaws at my 80 acre tree farm in northern MN. Stihl, Johnserds and Echo. I have owned several other saws over the years. Including Husqvarna, Homelight, and Poulin. In my experience the Stihl, Husqvarna, and Johnserds are a definite step up from the other brands. You get what you pay for so don't scrimp on a saw unless your use is very limited.
I like how compact that little Echo is. Would be perfect to load on the back of a small dirt bike to do trail maintenance, without having to lug around a "real" chainsaw all weekend.
I do have one of them and it's really fantastic for backpacking and portability. I mainly bought it for arborist work since it's one of the few single handed chainsaws so a guy can be up a tree hanging onto a branch with one hand and cutting limbs with this little saw in the other hand. I have a 16 inch bar on mine and it is still able to deal with softwoods like cedar. It is not going to compete with the larger ones in a normal cut down competition but that's not it's purpose.
I ended up going minimal and buying a Silky folding hand saw for trail maintenance on the bike. So far I'm very happy with it. Doesn't weigh down the bike at all, cost like 50 bucks, and took a 6-inch fir tree out of the trail in seconds.
@@blugods2655 The hand saw (if it's a really good one) is fine if you're going riding and might stop a time or two to conduct some maintenance. That's all I do with mine. If the mission IS trail maintenance, then forget about it; the chainsaw is 100% necessary to get real work done.
You left out that both the Echo saws are actually professional saws not just saws with some professional features. The 620 is 4.5 hp, has a magnesium crank case and magnesium sprocket cover, a rim sprocket and inboard clutch, an aluminum handle and a cold weather shutter to name a few of the things you left off.
They had problems with the flip fuel caps on the Stihl. When the saw was hot and you poped the cap they would spray fuel out. It. was bad enough they the forestry firefighters stopped using them for some time because gas spraying all over while fighting a fire is a problem. Lol. I believe they have taken care of the issue on newer models.
You are right! I originally had that exact setup-590 and 330t. Sold the 590 and upgraded to the 620 (same saw, just mag clutch cover, aluminum handle, unlimited coil, and a few other bits and pieces) and sold the 330 recently due to non use after I bought the 2511t. I really loved both of them, and all my Echos, really.
@@hphillips7425 sure. He just gives the stuff to me! But seriously, I think he does fine, certainly more motivated to do projects than I am! A done project is way better than unfinished or unstarted project any day.
How bout you, After the storm came through I bought an Echo CS590 and it is a cutting machine if you are man enough to hold on to it. It is to heavy for me to carry for long times.
@@HamiltonvilleFarm Yes sir it is and I bought it from a dealer for $300.00 and he put it together and filled it with gas and oil. It is good for cutting tree's that are down and cutting them down but as far as trying to cut stuff that is up it is so heavy. I am going on 59 and my weight lifting is not what it used to be. I would like something lighter that cuts good.
@@kevin86674 i think you would like the echo 352 it's light but it can cut all day long and ot has no problem going through big wood just put a 18in bar on it.
I have an STIHL MS 150 T C-E ($500 top handle) and STIHL MS 661 C-M ($1,400 bigger saw), and a Coocheer 6200, (which I found new on amazon for $49.00). They all run great
First 2 saws were Stihl 028 and 044 in the early 1980's. owned a LOT of saws after that but the last 2 I bought and the only ones I have now are Husq 435 and 562XP(ported). All makers have good and bad models. As a home owner only saw, the Husq 435 is probably one of the best made. Price/power for the amount of actual use.
I put dual dogs on my 261 aswell, but I'm running an 18" Sugi bar on mine. The saw does not normally come with dual dogs equipped; you will have to buy that as a separate accessory. The only Stihl pro saws that come standard with dual dogs on them are the MS 362 R CM, MS 441R CM, MS 461 R, MS 462 R CM, MS 661cm, and MS 880cm. For anyone looking to add them, it will run you about $25.
I do garden maintenance so not a professional tree surgeon. I do occasionally take down a small to medium tree but most chainsaw work is logging up. A pro saw was not necessary, so I went for the Husqvarna 455 Rancher, it has all the power I need & has been excellent!
Hi Timur, all ECHO engines are made in Japan. A number of products are completely made in Japan such as the CS-7310P. Then we have manufacturing facilities in the US and China. If you're interested in a product and would like to know the manufacturing details give a shout out to our team at ECHO USA and they'll be happy to inform you.
I have a Stihl ms 270 and really like it but buy a couple of gas and oil caps for extras because they seem to break after a few years of service. I heat with wood. I just purchased an Echo cs 490. Haven't got it yet . Nice video!
You guys make me want to buy a bigger chainsaw than my tiny MS250!!! Seriously, there is so few occasion where I would like a bigger saw! I like the fact the MS250 is light. Thanks for sharing!
Stihl is a nice saw for sure. You really can't go wrong with any of these three brands. It just comes down to preference, in my opinion. Thanks for watching 👍
The 440 is ok, but if the budget allows I would highly recommend the 562 from Husqvarna. That’s my limbing saw. I run it like a dog and it keeps coming back for more.
I have a echo cs400 and I I have a outdoor wood boiler. I burn alot of wood and I am upgrading to a bigger echo. My back will thank me. CS 400 is a great saw for light wood use but if you are cutting bigger logs spend the extra $$
I've been looking at a few gas chainsaws. I could use some advise on my second saw. The three I'm looking at are. Stihl MS 261 Husqvarna 445 Echo 590 Timberwolve I'm just a home owner that cuts firewood and helps out friends here and there. I love the Quality and Reviews of these three. What's your thoughts and personal opinion on my needs. Thanks Jeff
Good review Hank and Randal. I'm a Stihl man myself but i have used the Husqvarna and kinda liked it. I have been seeing some good reviews on the Echo. My next purchase i might try this brand out. I've been hearing some good testimonies on the Echo weedeaters. Its kinda hard to beat a Stihl tho.
Echo rules the weedeating area they make the lightest and most powerful weed eaters hands down....here in South texas it's what all the businesses use...but if you do intend on getting a echo chainsaw get yourself a 590 timberwolf its a 59.8 cc saw same as the 620 only difference is the 620 has advanced cutting performance system and allows you to put up to a 27in bar wich I can guarantee the 590 can do with no problem... I'm only going up to a 24 inch bar on my 590 but im ordering a 28in for my echo 800p...i will warn you Mr. Stihl man once you get a hold of a good echo chainsaw you will probably start replacing your stihl saw 😆 unless you have those beast ass stihl saws the biggest echo chainsaw is sadly only at 81.1 cc but that's pretty beast considering we don't got huge trees down here in Texas not like up north.
my favorite and best saw ever has been a Sthil 029 it’s a oldie without any safety features similar to that lightweight Echo you guys had as far as size mine i installed a longer Stihl bar that required new gearing unfortunately Stihl stopped producing parts for it years ago so i can run the heck out of it untill something major goes on it then it’s scrap metal we have a special relationship and if she has sat for any longer than a few months she likes to be started her own way but will be screaming onthe third pull always the Tree guys love them and will pay top dollar whenever the see one for sale as they are great for climbing and hanging on their belts ! i am not a professional yet i do have a few Tree guys inmy family that have been climbing for over 25 years one of who is also a professional Fulltime Firefighter as well who has always told me he just likes Climbing and cutting down trees plus he gets paid for it
You are forgetting that the echo 620p .. which I dont know if you have it on a 620p but I have a 620pw and it loves the 27" bar and full tooth chain but is also has a hot and cold weather switch too and fully adjustable carb and adjustable oiler with a unlimited coil and a bigger car than the echo cs 590 which is the same 59.8cc cylander head and piston.. the 620pw as far as I know only has a full wrap handle for falling timber added to it but it's a beast if you break it in properly with 20-30" logs and let it got threw heat cycles for 100hours of use .. mines running at about 14,500rpms after it's been warmed up while cutting
Everybody ought to have at least half a dozen chain saws. On a more serious note you both are driving Ford pickups. What kind of engines did you go with & why. I’m in the market.
I wholeheartedly agree with Hank! I am a diesel mechanic by trade and will never own a diesel pickup again unless it is living in front of a trailer all day, every day. They are engines built to do a job, and need to be well taken care of. I chose the 6.2L gas V8 because I do not tow or haul all or every day, but it is nice to have the extra capability of the 6ft bed all the time (hard to find in a half ton), and I use it intermittently to tow my tractor with. It's also nice to not have to worry if I can do a thing, such as hook up to most any trailer if need be and comfortably pull it, or put a large load in the bad. The 6.2L doesn't get the best mileage, but it also isn't the $10k+ buy-in, either. Not to mention the significantly extra maintenance and repair costs.
Been running a Homelite bar on my Stihl saw for a while now. Just putting off getting a new bar. Finally took my saw into a dealer looking for the right bar and chain dude about messed his pants I guess my saw is from 1974 (Stihl 031AV not MS anything) and a collectors item. Just goes to show you the quality of those saws. I'm gonna keep it going as my primary saw but now i have a 20" bar for it.
@@atvrider028 I went to the store and they were running a special on the MS 271, so i ended up getting the Farm Boss 271 instead of the 291. So far I haven't been disappointed.
170s are good saws for bucking, small detail work, trees less than 10". Would recommend a 362 or 462 with the 170. The combo of those 2 gives the best of both worlds. In my 35 years of owning and operating saws Stihl has performed the best. Husky, handle falls off cutting tree down, Poulan, fast cutting but cylinder wears out after 3 years, Echo 3 year saw. My 361 is 20 years old, 026, over 30 years old. The tests these guys do on saws are not real world. Cut railroad ties, locust, brush, bamboo, huge overgrown shrubs with dirt and trash. Then tell me your saw is a good piece of equipment.
I have a battery saw made by Poulan and it is what I have to use now as the Stihl 250 saw and Poulan Pro gas saws are difficult to crank and I gave up on trying to start them. I have not had a Husqvarna saw, but Poulan saws are now owned by the Husqvarna company so I am using one of their saw's. I use the battery saw for trimming limbs, and cuttiing small bushes with and I may try to crank the other saws again one day when I feel like it.
I use chainsaws at my work everyday and Stihl and Husqvarna are only ones i will ever use. But Id love to try Jonsered once,heard good stuff about them.
Jonsered and Husqvarna used to have the same model saws. One orange. One red. Seems they would come down the same assembly line and either put red or orange plastics on them. Great saws.
I'm buying a new Husqvarna 460 Rancher tomorrow. I'll have to drive 140 miles to get it (I live remote). Anyway, I'm curious how it will compare to my old Stihl 041 Farm Boss. That thing is a cutting SOB. I need a new small chainsaw as well. However, I hear bad things about the smaller Husqvarna saws. I may go Stihl for the small chainsaw.
Hello, Absolutely love the video/rundown!!! Question: On the echo 620p saw, where/which retailer did you buy the skid plate? Does it work well with the metal front handle? Many thanks, J.
Decent video fellows but there is a lot lacking. Check out Project Farm for some hints on how to improve. For example, *How difficult is maintenance? * compare prices on one frame * compare "apples to apples" with the different brands with similar models * how long do they cut on a single tank of gas? * which is sharpest "out of the box"? and so on...
Stihl should make two stroke dirt bikes!! they would be great lol I still have my dads old farm boss and it still runs great cut many winters wood. It was literally ran over by a dozier heavy mud saved it. My newer one has never failed me as well for power and reliability its hard to beat a Stihl.
Those fuel bubbles are the most useless part on saws.. old school never needed them, saws today don't need them. It's a sales pitch. Knowing they wear out and crack. Forcing consumers to purchase replacement parts
Hank, when you guys get done there pack them chain saw up and head up here got lot of wood that needs cutting, you guys can brake them in!!, great video!!!🍒👍
A few years ago I finally spent the money on a new saw got a ms460 I didn’t want to carry multiple saws and against the salesman advice it bought the small saw I have no regrets about it super light great for climbing with and has ok power I’m going to put a big bore kit in it. I’d rather mod the small saw than climb a tree with a big saw
That saw IS really cute. I have 6 saws including this one, and it's my fave. But don't let the word cute mislead you into thinking it's not professional. I will choose this saw for any job the bar length will fit. There's way more power there than it's 25cc suggests.
I have a problem with Stihl saws not getting enough oil to the chain causing it to stretch, do you have a similar problem? and if so I'd love to hear of a work around.
It sounds like you may actually be running the chains too tight, as long as the oiler is working properly and the bar is clean it should work fine. Stihl pre stretches there chains which most cheaper companies do not. So excessive stretching comes from only one thing and that's over tightening the chains. Hope this helps you.
One handed chainsawing? 🤦🏼♀️ but seriously that little echo looks just about my speed. I’m to scared to try our big Stihl chainsaw but Kevin loves it. ~Heather
Im still havin a good ol' stihl 024 AV... Not the strongest saw, but i recently sharpened it, just about 2 degrees pointier than the guide line and heck that thing flies trough thick hard wood... The old stihl saws are just great I have it paired up with an 023... That thing depsite its size is still damn strong... cut two trees down with it recently, went fast and easy... I just love these!
My next all's going to be an echo just for the simple fact the dealers I got one 10 Mi west of me and one 10 Mi south of me the last 291 I had my boy got it stuck in a log and pull the crankcase apart I heard you could do that but I got to see it done I guess I miss that saw
I've got an 028, 391, and 661. I've got an 031 that's being looked at, as I couldn't figure out what it needs. I'm also looking at getting the ms500i and the 880.
@@TheNeuAdventure I do clean my saws every time (or nearly every time) I use them. Since I store them inside in filing cabinets, it just keeps things cleaner all around.
The 661 will run a 50” with a full skip all day no problem. Do the max air kit and pull the baffles out of the muffler and it will come alive. My absolute favorite modern saw.
Don't tell me one more joke,372 XP 5.5 HP full house chains92 driver along with timber tuff equipment disk bench type, along with Quicksilver mix and burn pint of fuel making just back cut right croovy rest ⚰️⚰️⚰️⚰️⚰️⚰️⚰️⚰️⚰️⚰️⚰️ use Carlton bar.
I want to buy a Husqvarna 435 II for my father for personal use at his country home, but we are not even chainsaw beginers. I was always afraid... Any advice? Is it safe? Can he learn easy, to use it, maybe once a month? Thanks. Nice video.
Buy the protective clothing that goes with it. Also just go slow and don't tackle anything that is out of the comfort zone until you get more experience. Pay attention to the surroundings and start small as a beginner. Cut a small tree that is far away from anything so it doesn't fall on a house or car by accident.
have a husky 460 rancher, husk 365 and a stihl 661. honestly the 365 was a real light for the power and awsome but the stihl 661 is THE saw, you just have no limits.
Nice to hear someone who knows how to pronounce Hus-kuh-VAR-nuh. Irregardless of that, Husqvarna makes the best chainsaw you can buy at any price. Why else do more pro loggers and tree guys who rely on these saws for there living use them?
See more reviews and [roducts here: ruclips.net/p/PLLvtX6M7iiPCn1ZtbAUWY68vuwD__4_v2
Go Echo!
I knew you'd like those!
Now here is a man after my own heart!
Something you guys didn't mention was the difference in sprockets. Most pro saws use rim sprockets, while most consumer saws use spur sprockets. Rim sprockets seem to last longer, less chain wear and are cheaper to replace. In fact sprockets are one of the few differences between the Echo Timberwolf and Echo's more professional saws. Good job. All the top brands make some good saws. I have went almost entirely to Echo, but have owned them all. Been cutting for near 50 years. Interestingly most residential framing contractors use Echo. Very durable and can take the abuse of many different personnel using them. Echo home owner warranty is 5 years. Other brands are more high performance and cut a bit faster. But they usually cost more.
Yeah good points!
I have a Stihl MS-391 with a 20" bar, Echo CS-490 with a 16" & 18" bar, Husqvarna 435 X-Torq with a 16" bar. I'm buying a Echo CS-590 Timber Wolf with a 20" bar this weekend to add to them. I am also considering buying a Husqvarna 450 with a 18" or 20" bar later this summer. I live rural outside a small Midwest town of 1,650 people. My house is surrounded by trees and I have a woods out back. Every time it storms something breaks off or comes down. I also use my saws at work in the maintenance department as well. We already tore up and wore out my old Poulan Pro 260 with a 18" bar and their Poulan 3314 with a 16" bar. I'm not messing with cheap saws anymore and only buy and use good ones. I buy them so they are mine and I can take them home anytime I want. They are cheap and would never spring for a good saw. Not like Menards where we have our corp account sells any good ones anyway. That would be Lowe's and Home Depot. I'm not buying anymore Poulan, Craftsman or whatever homeowner big box store cheap junkers no matter who's money it is.
I bought a Husqvarna 45 special back in1991 or so. I cut all my firewood with it and firewood for friends. I cut down many trees and it cut a lot fallen trees off my fences over the decades. It is always on the back of my side by side when we are on the trails as well. It has been a great saw for thirty years and i think it will last me many more. People are complaining about the "plastic" on the Husqvarna's but after 30 years of owning one i do not see a problem with it. For 99.5% of users it is more saw than they will ever need.
Right on!
Need one of these high quality saws. It’s always easy to rationalize getting a cheaper one but we always regret it!
Yeah I hear ya. I bought mine at a big spring savings deal. Saved a few dollars
I've never once regretted spending more on a higher quality tool.
I never bought a gas chainsaw, when i was 15 i repaired 2 chainsaws, a stihl 010 av and a partner r17, built in the 60s and 80s, and since then they are running and running... old saws got so much power, and no safety :)
I have a lot of saws. Big, small, cheep, and expensive. And you definitely get what you pay for. I bought the 661 for the big timber but now I use it for everything. And the 20+ other saws just sit on my shelves.
I have a little 170, and a 271. I've been happy with both.
I think as a homeowner it's better to buy something heavy duty and forget about it. Those big saws are designed for heavy use, and if you keep one around and only cut say once a month or so, that thing will last forever.
True, some of my saws are 20 years old, be sure and use non ethanol gas, that ethanol gums up the carb and eats rubber hoses. Hard learned and expensive lesson with my Stihl 660. I don't fall big timber too much and the saw sits for a few months sometimes Starbrite is an excellent fuel stabilizer, better than Sta-bil according to my mechanic, famous wrench who builds hot saws and racing snowmobiles in PNW. That residue has to be removed with ultrasound.
@@1cryinprofit I use 100LL avgas in my little stuff that is used intermittently. Leaves no residue and keeps for years.
One of the biggest differences between pro models and consumer models is the power to weight ratio.
Pro models are a bit lighter and a bit more powerful than the same number CCs in the comsumer models.
Also Pro models are built with better materials and made to stand up to alot more steady use.
I will always choose a pro model saw, even though I don't "need" one, because I like the better build quality and the perks of the pro models.
What comes to mind is that a lot more thought appears to have gone into the design of the professional saws. Things are suddenly in the right place, things make sense, things are convenient. There is no reason for a home owner to not enjoy all those same benefits. It was great to see a modest sized pro saw with all the nice pro features, without having to carry a 3 foot bar around. I like the 261C! :-)
I got a ms170 16 inch I use for firewood,milling lumber, cutting trees down it has plenty of power I love it no problems except the fuel and bar oil caps are cheap they strip out easily all for 170.00
Love the echo CS-590 Timberwolf. I use Stihl on my truck company at work and they are fantastic. I use Echo for my Lawncare equipment and have nothing but good things to say about them. The Stihl blowers are still a little bit better built. But the echo trimmers are far better, never have issues with echo start ups.
Right on👍 thanks for the comment.
I had a Stihl FS-56 which I gave away and got an Echo SRM-225......way better. As for leaf blower I have a BG-50, so yeah I can relate to what you say.
@@mf6532 i have an srm210 back when they had grey plastics. Love the old 2 strokes and echos LAST
I have a fair amount of wooded acreage and during good weather days I'm outside cutting trees and brush. I've been using an Echo CS-370 16" chainsaw for several years and it is an amazingly reliable saw. I've been cutting a LOT with it for 5-6 years and it never lets me down. But I cannot emphasize good maintenance whatever you run.
That's right Kevin. Thanks for watching 👍
I like my Stihl’s, but if you take good care of any make, they are all good.
I agree. I do like Stihl cutting power💪
I asked my uncle, a retired professional timber faller. (He's 72 now, and started logging when he was 15) He used Stihl 40 years ago, but switched to Husky about 30 years ago and never looked back, because the Stihl wouldn't hold up. His current saw is a Husqvarna 372 XP, says it's the best saw he's ever owned.
Yikes a 1000 saw it better be
I asked my uncle who was 185 years old and he said your uncle is wrong
I promise you there are more stihl's running today from that era than huskys. your uncle is seriously confused. huskys are awesome but never have they been more durable than stihl.
My uncle just turned 193 and he said craftsman is the best
372xp ❤️❤️❤️❤️
Stihl and Husquarna for production. Echo for youtubers cutting cookies once a year.
Lol. That's funny 😁👍 thanks for watching 👍
I considered myself a Stihl guy, but the other day I grepped a Echo CS-400 from Home Depot, it felt so good in my hand, I bought it ! I absolutely like it, it's my all around saw beside my MS-211, and my MS-271 !
Right on👍
I loved my new 271 Farm Boss but went to an echo dealer and bought a cs590 Timberwolf and it's hands down a better saw than the bigger more expensive brands. It's a beast of a machine. Cuts awesome and has so much torque that it totally impressed me to the point that I'm buying echo for now on when it comes to saw
Captive nut on a chainsaw is a novel concept and yet no one ever gives a second that humans had captive nuts all along as a masterpiece of engineering! Imagine every time you undid your fly you lost a nut!
Never shorten your chain if it has that much extra play in it it will wear your clutch drum sprocket out, you nerd a new chain. Use good heavy weight tacky oil to keep from stretching the chain. You can shake the bottle and if it sounds like water it is too light of oil. Best way to sharpen is a Stihl 2 in 1 sharpener. A good sharp chain is better than displacement. I cut 90% with a Stihl MS181C with a 16" bar. I also have a MS251C with a 18" bar for the bigger stuff but usually use the Smaller saw because of weight. I cut up about 40 ft of a 28" elm trunk in about 20 to 25 minutes with the MS181C.
Thanks for watching
I have 4 chainsaws at my 80 acre tree farm in northern MN. Stihl, Johnserds and Echo. I have owned several other saws over the years. Including Husqvarna, Homelight, and Poulin. In my experience the Stihl, Husqvarna, and Johnserds are a definite step up from the other brands. You get what you pay for so don't scrimp on a saw unless your use is very limited.
Thanks for watching 👍
80 acres in Mn!! Sounds like heaven!
I like how compact that little Echo is. Would be perfect to load on the back of a small dirt bike to do trail maintenance, without having to lug around a "real" chainsaw all weekend.
Yeah, true👍
I do have one of them and it's really fantastic for backpacking and portability. I mainly bought it for arborist work since it's one of the few single handed chainsaws so a guy can be up a tree hanging onto a branch with one hand and cutting limbs with this little saw in the other hand. I have a 16 inch bar on mine and it is still able to deal with softwoods like cedar. It is not going to compete with the larger ones in a normal cut down competition but that's not it's purpose.
I ended up going minimal and buying a Silky folding hand saw for trail maintenance on the bike. So far I'm very happy with it. Doesn't weigh down the bike at all, cost like 50 bucks, and took a 6-inch fir tree out of the trail in seconds.
@@JETZcorp after heading up to some trails near me with just a handsaw I’ll never do that again
@@blugods2655 The hand saw (if it's a really good one) is fine if you're going riding and might stop a time or two to conduct some maintenance. That's all I do with mine. If the mission IS trail maintenance, then forget about it; the chainsaw is 100% necessary to get real work done.
You left out that both the Echo saws are actually professional saws not just saws with some professional features. The 620 is 4.5 hp, has a magnesium crank case and magnesium sprocket cover, a rim sprocket and inboard clutch, an aluminum handle and a cold weather shutter to name a few of the things you left off.
Thanks. I'm definitely no chainsaw expert 👍
They had problems with the flip fuel caps on the Stihl. When the saw was hot and you poped the cap they would spray fuel out. It. was bad enough they the forestry firefighters stopped using them for some time because gas spraying all over while fighting a fire is a problem. Lol. I believe they have taken care of the issue on newer models.
Echo cs 590 and vs 330t. I believe you get more for the money with echo.
The echos are nice👍
You are right! I originally had that exact setup-590 and 330t. Sold the 590 and upgraded to the 620 (same saw, just mag clutch cover, aluminum handle, unlimited coil, and a few other bits and pieces) and sold the 330 recently due to non use after I bought the 2511t. I really loved both of them, and all my Echos, really.
TTWM I need an honest answer is there any hope for Hank to improve his welding and fabrication skills?😂
@@hphillips7425 sure. He just gives the stuff to me! But seriously, I think he does fine, certainly more motivated to do projects than I am! A done project is way better than unfinished or unstarted project any day.
@@hphillips7425 idk. I've had many years to learn to get this bad😂😂
wow very interesting thank you!! (You should see the little junker we have here, free from a neighbor. and it looks like it)
Thanks for taking the time to watch and make the comment. I truly appreciate it! Have a good day.
How bout you, After the storm came through I bought an Echo CS590 and it is a cutting machine if you are man enough to hold on to it. It is to heavy for me to carry for long times.
That's a big saw!
@@HamiltonvilleFarm Yes sir it is and I bought it from a dealer for $300.00 and he put it together and filled it with gas and oil. It is good for cutting tree's that are down and cutting them down but as far as trying to cut stuff that is up it is so heavy. I am going on 59 and my weight lifting is not what it used to be. I would like something lighter that cuts good.
@@kevin86674 look at a cs400. It is a really nice saw that has a lot of good features but also is very lightweight.
@@BigOrangeTractors Thanks for the info. I will check on one.
@@kevin86674 i think you would like the echo 352 it's light but it can cut all day long and ot has no problem going through big wood just put a 18in bar on it.
U have one of huskys weakest saws, and youre impressed with it lol get a husky 346xp or 357xp. Theyll rock ur socks off if u like the 435.
Thanks
Right on, i prefer a good husky ! I own 3 saws 2 huskys and one stihl. I always seem to pick up one of the huskys.
I have an STIHL MS 150 T C-E ($500 top handle) and STIHL MS 661 C-M ($1,400 bigger saw), and a Coocheer 6200, (which I found new on amazon for $49.00). They all run great
Thanks for taking the time to watch and make the comment. I truly appreciate it! Have a good day.
First 2 saws were Stihl 028 and 044 in the early 1980's. owned a LOT of saws after that but the last 2 I bought and the only ones I have now are Husq 435 and 562XP(ported). All makers have good and bad models. As a home owner only saw, the Husq 435 is probably one of the best made. Price/power for the amount of actual use.
Thanks for watching 👍
I put dual dogs on my 261 aswell, but I'm running an 18" Sugi bar on mine. The saw does not normally come with dual dogs equipped; you will have to buy that as a separate accessory. The only Stihl pro saws that come standard with dual dogs on them are the MS 362 R CM, MS 441R CM, MS 461 R, MS 462 R CM, MS 661cm, and MS 880cm. For anyone looking to add them, it will run you about $25.
Thanks for taking the time to watch and make the comment. I truly appreciate it! Have a good day.
@@HamiltonvilleFarm You're welcome, thanks for taking the time to read and respond to my comment! I hope you have a great day too!
Sorta going towards Echo. Stihl is good. But so is Echo. Parts easier to come by. Just seem to be made with common sense
Echo has really upped their game. Good saws👍
Hank I run stihl saws I have a ms 192tc a 029 and a ms441 magnum 16" bar a 20" and a 28" respectfully I can run a 32" on the big saw
I do garden maintenance so not a professional tree surgeon. I do occasionally take down a small to medium tree but most chainsaw work is logging up. A pro saw was not necessary, so I went for the Husqvarna 455 Rancher, it has all the power I need & has been excellent!
Thanks for watching 👍
Are any of the Echo saws made in Japan like they once were ??
I'm not sure. Maybe someone will read this and know the answer
Hi Timur, all ECHO engines are made in Japan. A number of products are completely made in Japan such as the CS-7310P. Then we have manufacturing facilities in the US and China. If you're interested in a product and would like to know the manufacturing details give a shout out to our team at ECHO USA and they'll be happy to inform you.
Thanks for chiming in Echo. 👍
@@ECHOTools Thank's for your help. Much appreciated.
I have a Stihl ms 270 and really like it but buy a couple of gas and oil caps for extras because they seem to break after a few years of service. I heat with wood. I just purchased an Echo cs 490. Haven't got it yet . Nice video!
Thanks for watching. We appreciate it. Have a good one
I noticed that Brandell keeps all his saws clean and prepped while Hank hasn't. LOL! Great video and thanks for sharing!
Yeah, he gets on me all the time about that😂😂
I love the top handle echo. I use it all the time. I have cut down some pretty big trees with it.
Cool! Thanks for watching 👍
You guys make me want to buy a bigger chainsaw than my tiny MS250!!! Seriously, there is so few occasion where I would like a bigger saw! I like the fact the MS250 is light. Thanks for sharing!
Good evening Joe ! I'm just a phone call away when you will need a bigger chainsaw !!! LOL Cheers !!!
go see your neighbor!!!😂
@@HamiltonvilleFarm LOL !!! ;) LOL
@@seanf6632 Yes Sir, and very economical to run too and ergonomical since it's very light !!! Cheers !!!
Sthil 025, its been a great saw. Just bought me thr sthil 180 easy start for limbs and light work.
Right on Allen! Good choice👍
All i have used is stihl. Im looking to buy a new 18 inch so im watching this to compare
Stihl is a nice saw for sure. You really can't go wrong with any of these three brands. It just comes down to preference, in my opinion. Thanks for watching 👍
Husky 440 is the way to go just got one and i love it plenty of power and torque
The 440 is ok, but if the budget allows I would highly recommend the 562 from Husqvarna. That’s my limbing saw. I run it like a dog and it keeps coming back for more.
I have a echo cs400 and I I have a outdoor wood boiler. I burn alot of wood and I am upgrading to a bigger echo. My back will thank me. CS 400 is a great saw for light wood use but if you are cutting bigger logs spend the extra $$
Thanks for watching 👍
If you where going to have to choose one witch one would you pick for all around saw
I like the husqvarna shut off switch better but the Sthil cuts better. So it’s hard to say
Thought I was a Stihl man, until I operated a Husqvarna,plus no stupid 2 piece oil and gas caps that come off all dang time!
MI SERVE CATENE DE STIHL 1000 PAEE GRAZIE MILLE RUclips AMEN
I always liked my huskavarnas
Yeah they are nice for sure. 👍
I've been looking at a few gas chainsaws. I could use some advise on my second saw. The three I'm looking at are.
Stihl MS 261
Husqvarna 445
Echo 590 Timberwolve
I'm just a home owner that cuts firewood and helps out friends here and there. I love the Quality and Reviews of these three.
What's your thoughts and personal opinion on my needs.
Thanks
Jeff
Who is this Brandel guy and does he know I’m your BFF? 😂
Lol of course! You know us grandpa's have to stick together 👍
Good review Hank and Randal. I'm a Stihl man myself but i have used the Husqvarna and kinda liked it. I have been seeing some good reviews on the Echo. My next purchase i might try this brand out. I've been hearing some good testimonies on the Echo weedeaters. Its kinda hard to beat a Stihl tho.
I do like my Stihl. They are good saws. I've never run an Echo. I'd like to try it out. 👍
Echo rules the weedeating area they make the lightest and most powerful weed eaters hands down....here in South texas it's what all the businesses use...but if you do intend on getting a echo chainsaw get yourself a 590 timberwolf its a 59.8 cc saw same as the 620 only difference is the 620 has advanced cutting performance system and allows you to put up to a 27in bar wich I can guarantee the 590 can do with no problem... I'm only going up to a 24 inch bar on my 590 but im ordering a 28in for my echo 800p...i will warn you Mr. Stihl man once you get a hold of a good echo chainsaw you will probably start replacing your stihl saw 😆 unless you have those beast ass stihl saws the biggest echo chainsaw is sadly only at 81.1 cc but that's pretty beast considering we don't got huge trees down here in Texas not like up north.
My little $199 echo weed eater blows through 2' tall grass no problems.
Good evening Folks !!! Great chainsaw review !!!! Keep up the good works !!! Cheers !!!
thanks! Cheers!
Which one can I buy that I won't have to re-tighten the chain every 5 min.
Once the chain is old and dull, it's about done stretching haha.
I have three McCulloch saws. one small electric, one small gas, and one big gas. After 30 years they are still going strong.
right on!
I grew up with a McCulloch Mac 10-10 Wow! Fantastic saw
What's your big MCcullock saw? Just curious
Look at the chain tension on the second one, omg
Enjoyed the overview of the different chainsaws. I have two Stihls and have been very pleased with both. Thanks for sharing Hank and Brandell.
Thanks Terry. Have you gotten all the decorations down yet😊
@@HamiltonvilleFarm Hank, not yet but we have been working on them. Hope to be finished by the end of January.
my favorite and best saw ever has been a Sthil 029 it’s a oldie without any safety features similar to that lightweight Echo you guys had as far as size mine i installed a longer Stihl bar that required new gearing unfortunately Stihl stopped producing parts for it years ago so i can run the heck out of it untill something major goes on it then it’s scrap metal we have a special relationship and if she has sat for any longer than a few months she likes to be started her own way but will be screaming onthe third pull always the Tree guys love them and will pay top dollar whenever the see one for sale as they are great for climbing and hanging on their belts ! i am not a professional yet i do have a few Tree guys inmy family that have been climbing for over 25 years one of who is also a professional Fulltime Firefighter as well who has always told me he just likes Climbing and cutting down trees plus he gets paid for it
That's awesome man. And tell your family member thanks for their service! Firefighters have a tough job👍
You are forgetting that the echo 620p .. which I dont know if you have it on a 620p but I have a 620pw and it loves the 27" bar and full tooth chain but is also has a hot and cold weather switch too and fully adjustable carb and adjustable oiler with a unlimited coil and a bigger car than the echo cs 590 which is the same 59.8cc cylander head and piston.. the 620pw as far as I know only has a full wrap handle for falling timber added to it but it's a beast if you break it in properly with 20-30" logs and let it got threw heat cycles for 100hours of use .. mines running at about 14,500rpms after it's been warmed up while cutting
Everybody ought to have at least half a dozen chain saws. On a more serious note you both are driving Ford pickups. What kind of engines did you go with & why. I’m in the market.
Brandell drives a gasser and I drive a 6.4L ...get a gasser.
I wholeheartedly agree with Hank! I am a diesel mechanic by trade and will never own a diesel pickup again unless it is living in front of a trailer all day, every day. They are engines built to do a job, and need to be well taken care of. I chose the 6.2L gas V8 because I do not tow or haul all or every day, but it is nice to have the extra capability of the 6ft bed all the time (hard to find in a half ton), and I use it intermittently to tow my tractor with. It's also nice to not have to worry if I can do a thing, such as hook up to most any trailer if need be and comfortably pull it, or put a large load in the bad. The 6.2L doesn't get the best mileage, but it also isn't the $10k+ buy-in, either. Not to mention the significantly extra maintenance and repair costs.
What do you think of the 2.7 eco boost engine.
If maintenance costs are an issue at all, don't buy a Ford. They're getting almost as bad as John Deere
Been running a Homelite bar on my Stihl saw for a while now. Just putting off getting a new bar. Finally took my saw into a dealer looking for the right bar and chain dude about messed his pants I guess my saw is from 1974 (Stihl 031AV not MS anything) and a collectors item. Just goes to show you the quality of those saws. I'm gonna keep it going as my primary saw but now i have a 20" bar for it.
Right on 👍 thanks for watching.
Thanks for the review. I'm thinking about buying the MS 291. I have an MS 170, but would like a little bigger saw with the 20" bar.
They are nice saws for sure 👍 have a good one.
I have both those saws you won’t be disappointed 291 a beast 170 a great light saw for small stuff
@@atvrider028 I went to the store and they were running a special on the MS 271, so i ended up getting the Farm Boss 271 instead of the 291. So far I haven't been disappointed.
170s are good saws for bucking, small detail work, trees less than 10". Would recommend a 362 or 462 with the 170. The combo of those 2 gives the best of both worlds. In my 35 years of owning and operating saws Stihl has performed the best. Husky, handle falls off cutting tree down, Poulan, fast cutting but cylinder wears out after 3 years, Echo 3 year saw. My 361 is 20 years old, 026, over 30 years old. The tests these guys do on saws are not real world. Cut railroad ties, locust, brush, bamboo, huge overgrown shrubs with dirt and trash. Then tell me your saw is a good piece of equipment.
You are the only person that likes stihl floppy caps 😂😂
All you need is gas powered, I’ve tried soo many electric and they are all pusssy compared to gas. Some things need to stay gas computation based
What ... no pro-level Husky?!?!
lol. We could only show what we had :)
I have a battery saw made by Poulan and it is what I have to use now as the Stihl 250 saw and Poulan Pro gas saws are difficult to crank and I gave up on trying to start them. I have not had a Husqvarna saw, but Poulan saws are now owned by the Husqvarna company so I am using one of their saw's. I use the battery saw for trimming limbs, and cuttiing small bushes with and I may try to crank the other saws again one day when I feel like it.
Thanks Sidney 👍
I use chainsaws at my work everyday and Stihl and Husqvarna are only ones i will ever use.
But Id love to try Jonsered once,heard good stuff about them.
Thanks for watching Julia. I appreciate the comment 👍
Jonsered are basically a relabeled husqvarna great saws. The jonsered name is switching over to redmax since husqvarna group owns both names
Jonsered and Husqvarna used to have the same model saws. One orange. One red. Seems they would come down the same assembly line and either put red or orange plastics on them. Great saws.
I'm buying a new Husqvarna 460 Rancher tomorrow. I'll have to drive 140 miles to get it (I live remote). Anyway, I'm curious how it will compare to my old Stihl 041 Farm Boss. That thing is a cutting SOB. I need a new small chainsaw as well. However, I hear bad things about the smaller Husqvarna saws. I may go Stihl for the small chainsaw.
I think you're gonna get some good ones. Thanks for watching 👍
Hello,
Absolutely love the video/rundown!!!
Question: On the echo 620p saw, where/which retailer did you buy the skid plate? Does it work well with the metal front handle?
Many thanks,
J.
2:14 hey theres still stuff around from the stone age, that says something
I use both the Stihl 271 and 291 in my place of work. They run fine but what I don't like about them is they can't be converted to 3/8 chain.
I put 3/8 setup on my M291
Decent video fellows but there is a lot lacking. Check out Project Farm for some hints on how to improve. For example,
*How difficult is maintenance?
* compare prices on one frame
* compare "apples to apples" with the different brands with similar models
* how long do they cut on a single tank of gas?
* which is sharpest "out of the box"?
and so on...
I prefer stihl over husqvarna stihl is a heavier more expensive saw but the rooms are faster
Thanks 👍
I was kind of hoping for a comparison on how they cut thru the same size tree branch?
Stihl should make two stroke dirt bikes!! they would be great lol I still have my dads old farm boss and it still runs great cut many winters wood. It was literally ran over by a dozier heavy mud saved it. My newer one has never failed me as well for power and reliability its hard to beat a Stihl.
LOL. that would be awesome!
Next year pro saws is coming to our family
Thanks for watching 👍
All of these are cold handle models? Pro tip: You can say chainsaw is for professionals if it's available with heated grip.
Right on 👍
Those fuel bubbles are the most useless part on saws.. old school never needed them, saws today don't need them. It's a sales pitch. Knowing they wear out and crack. Forcing consumers to purchase replacement parts
Hank, when you guys get done there pack them chain saw up and head up here got lot of wood that needs cutting, you guys can brake them in!!, great video!!!🍒👍
LOL. You got it!
A few years ago I finally spent the money on a new saw got a ms460 I didn’t want to carry multiple saws and against the salesman advice it bought the small saw I have no regrets about it super light great for climbing with and has ok power I’m going to put a big bore kit in it. I’d rather mod the small saw than climb a tree with a big saw
Thanks for watching 👍
there's a big difference between "recommended bar size" and what you can run...
Wow, that small Echo saw is actually cute. A word I've never used to describe a chainsaw before ..
That saw IS really cute. I have 6 saws including this one, and it's my fave. But don't let the word cute mislead you into thinking it's not professional. I will choose this saw for any job the bar length will fit. There's way more power there than it's 25cc suggests.
my partner who is the spittn image of randall btw, has the stihl long bar in your vid. he likes it.
Right on 👍
I like older more than this half plastic made Saws. still running 041av and 08s
Yeah I hear ya👍 thanks for watching
Maybe tighten the chain on the Husky 435. It pains me to think you are operating it like that...
Thanks for watching 👍
I have a problem with Stihl saws not getting enough oil to the chain causing it to stretch, do you have a similar problem? and if so I'd love to hear of a work around.
I haven't noticed that, but I'm a weekend warrior type guy and probably wouldn't notice to be honest with you
@@HamiltonvilleFarm can I ask which bar oil you use?
@@subcompacttractorstuff4053 I use Stihl bar oil. I buy the gallon jug at a time.
It sounds like you may actually be running the chains too tight, as long as the oiler is working properly and the bar is clean it should work fine. Stihl pre stretches there chains which most cheaper companies do not. So excessive stretching comes from only one thing and that's over tightening the chains. Hope this helps you.
Still rocking the 064AV! You guys did a great job here, look forward to more videos. Got any bow blades lying round?
Thanks for watching and taking the time to comment 👍
I have a Stihl ms290 20" bar and the small chain. How do I convert it to the 3/8 chain
One handed chainsawing? 🤦🏼♀️ but seriously that little echo looks just about my speed. I’m to scared to try our big Stihl chainsaw but Kevin loves it. ~Heather
Right on👍
Limbing saws are designed to be operated with one hand, it's not a big deal.
Im still havin a good ol' stihl 024 AV...
Not the strongest saw, but i recently sharpened it, just about 2 degrees pointier than the guide line and heck that thing flies trough thick hard wood...
The old stihl saws are just great
I have it paired up with an 023...
That thing depsite its size is still damn strong... cut two trees down with it recently, went fast and easy...
I just love these!
For sure! Thanks for watching!
My next all's going to be an echo just for the simple fact the dealers I got one 10 Mi west of me and one 10 Mi south of me the last 291 I had my boy got it stuck in a log and pull the crankcase apart I heard you could do that but I got to see it done I guess I miss that saw
I'm a husqvarna fan I have a 455 a 460 and a 372xp I think they run well and I have had little issue with them all. My 455 is 7 years old.
Thanks for watching 👍
I've got an 028, 391, and 661. I've got an 031 that's being looked at, as I couldn't figure out what it needs. I'm also looking at getting the ms500i and the 880.
Thanks for taking the time to watch and make the comment. I truly appreciate it! Have a good day.
@@HamiltonvilleFarm you have a good day as well, sir.
I can’t get my ms291 to oil for crap! So much so I almost hate the dang thing......
Awe man
Did Brandell polish yo his saws foe this production?? His all look fresh and clean 😁
Yeah he only bought his for show😂😂. Nah, that's just the way he is. He keeps all his stuff nice and tidy, unlike me😁
Good for him... lol!! Ours look more like yours... we call it “broken in”... or “well loved”
@@TheNeuAdventure I do clean my saws every time (or nearly every time) I use them. Since I store them inside in filing cabinets, it just keeps things cleaner all around.
I’m impressed! We probably should do that... lol!
The 661 will run a 50” with a full skip all day no problem. Do the max air kit and pull the baffles out of the muffler and it will come alive. My absolute favorite modern saw.
They're beast for sure. 👍
Yes sir!
Love echo
Nice saws👍
My Husqvarna 365 special just locked up after 20 years of use. Any suggestions for a new saw?
If that lasted you 20 years, I'd go back with Husqvarna 👍
But which model? They have changed so much!
Buy the 365 again. The new Huskies are rubbish
Don't tell me one more joke,372 XP 5.5 HP full house chains92 driver along with timber tuff equipment disk bench type, along with Quicksilver mix and burn pint of fuel making just back cut right croovy rest ⚰️⚰️⚰️⚰️⚰️⚰️⚰️⚰️⚰️⚰️⚰️ use Carlton bar.
👍
Still... cutting up your zombie-apocalypse problems for over 30 years! Lol
*Stihl
Lol. Nothing kills zombies like stihls's👍
Echo is wrong brother ,or they are just lieing lol because my mini mac 1 is the worlds lightest chainsaw bar none period point blank !!! Just saying
Thanks for watching 👍
I want to buy a Husqvarna 435 II for my father for personal use at his country home, but we are not even chainsaw beginers. I was always afraid...
Any advice? Is it safe? Can he learn easy, to use it, maybe once a month?
Thanks. Nice video.
Buy the protective clothing that goes with it. Also just go slow and don't tackle anything that is out of the comfort zone until you get more experience. Pay attention to the surroundings and start small as a beginner. Cut a small tree that is far away from anything so it doesn't fall on a house or car by accident.
Buy him a pair of chaps, it will save alot of blood.
have a husky 460 rancher, husk 365 and a stihl 661. honestly the 365 was a real light for the power and awsome but the stihl 661 is THE saw, you just have no limits.
Thanks for watching
Nice to hear someone who knows how to pronounce Hus-kuh-VAR-nuh. Irregardless of that, Husqvarna makes the best chainsaw you can buy at any price. Why else do more pro loggers and tree guys who rely on these saws for there living use them?
This is cool thank y'all
Thanks for watching 👍 we appreciate it!