when I send OH as a separate output, the cymbals are no longer in stereo - if I pan them within AD and the output is master they pan, but if OH has a separate output, the pans don't work
Hi! I made everything just as you said but my separate channels are in strange stereo mode - like left channel for the kick and right for the snare on first one, left for one tom right for another tom on second etc. how do i break it up to mono channels?
Hi Ian, That sounds strange. Did you click on the small + to add Aux tracks? What does the input say on the first Aux 1 kick channel? It should be called "Addict3". Please send in a ticket via www.xlnaudio.com/support if you need more detailed assistance.
Hi, yes there is, check the edit-page for the kit pieces and you should be able to set these parameters. If you would have any further questions about this then don't hesitate getting in touch with our Support team and they will assist you www.xlnaudio.com/support
Super, except how do you then bounce each output to audio individually? I want one audio file for kick, one for snare, etc. That would be a huge leap forward with this plugin
Hi, you should be able to do this, we can set you up with detailed instructions on how to achieve this if you contact us through our website: www.xlnaudio.com/support
Hello, you will need to route the aux/bus channels from Logic to audio tracks and then record those and you should be able to get separate audio files for the indivual channels in AD2. If you would have any further questions about this then don't hesitate getting in touch with us here: www.xlnaudio.com/support
Is there a way to set up multi channel output in standalone mode / without DAW? I'm able to set the separate output option for each channel, but I can't find any routing settings to link these outputs to specific output channels of my interface (Behringer X32).
Hi there Jan, Make sure the available outputs of your selected audio device is activated in the Audio & MIDI Setup dialouge. Open up the dialouge by clicking on the button in the top left corner labeled "Audio & MIDI Setup". Then check all outputs you want Addictive Drums 2 to have access to. Here's an image of the setup dialouge: www.dropbox.com/s/m8sy3sq5s62cxbl/audio%20and%20midi%20setup%20AD2.png?dl=0
@@XLNAudioSupportChannel thanks for your answer. so in case i activate output channels 1+2,3+4,5+6 the mains would be on 1+2, eg. kick on 3, snare on 4, overhead on 5+6? or will it always output the mixer channels in stereo? (scenario is, that i want to use my X32 IEM Mixer Scene Presets for my Acoustic Drums AND my Edrums)
In multichannel mode all close mic channels (Kick, Snare, Hihat etc) will be routed to one mono output each, starting with Kick on output 1. Overhead, Room and Bus will be routed to one stereo output each, and last the Master on a separate stereo output.
But how to multiout a stock preset and keep it's origin form - compression on the master bus, etc? To preserve and use it the way it was made! But on separate tracks in the Daw! Im using Studio One 4.5 and when i try to multichannel a stock preset, I end up with some kind of doubled sound - loud and annoying. I don't get it.
Hello guys, excelent video! i need your help. I need to convert those aux channels into wav channels (mono for kick and snare, stereo for over and room) how can i do that to treat them separate but as audio. I use logic too. ! if you cand help me would be awesome.! Thank you.
Hi Daniel, In Logic, audio from an instrument are routed to one or several Aux channels. Even though you can put plugins on these channels, and route them to other Aux channels, I don't think you can record the sound directly. Here's a work-around: 1. Right-click on each of the Aux tracks in Logics Mixer, and choose "Create track". This will create a track for that aux channel in the arrangement window. 2. Logic won't export a track without a Region in Arrange, so you'll need to use the Pencil to draw a Region on every Aux track (the Region doesn't need to contain any data - just an empty Region will do). 3. Go to the menu File -> Export -> All Tracks As Audio Files. 4. The next pop-up window will something like "10 tracks to be bounced" or however many tracks you have. Hope you'll find this method useful..
Hello Daniel, were you able to make this happen? I've been unsuccessfully trying for hours to do so... Please help me out if you figured it out. Thanks!
@@jjvillafanemusic Frustrating but useful workaround: send from the Aux back into fresh audio tracks, record, presto - stems for sending to your mixer! There's got to be a better way...
I don't get the small "+" button in my AD2 channel strip after re-assigning Post Separate Out (Post Fader) in my AD2 plug-in per my Logic Pro 10.8.1 app - don't see the individual midi tracks in Logic Pro's mixer? ;-(
Hi, sorry for the slow reply, are you loading AD2 as multi-output plugin? Make sure, you do this and then check the mixer in Logic for the "+" button. If you still need help with this then don't hesitate getting in touch with our Support team: xlnaudio.zendesk.com/
Hi, i did the same steps as the video, but i have 2 problems, in the options to separate tracks my addictive drums 2, only give me 3 options, those are, master, separate output, separate output + master thats all. and no matter which option i select, when i separate them in the logic pro x mixer, i just can have 8 separate tracks, no 13 as show in the video, please help! thanks.
Hi there Juan, This sounds like you are running an outdated version of AD2. Please run the XLN Online Installer and update to the latest version and things should go smoother! If you are still having issues with this after updating, please contact our support at www.xlnaudio.com/support with a screenshot of the AD2 mixer.
now , how i turn this into audio channels to create a mixdown production > that's what i need help with. no shows how to do this anywhere. thanks in advance.
Hello, you will need to route the bus/aux channels from the separate outputs to individual audio channels and then record those with the "monitor" active on each of them. If you have any further questions about this then don't hesitate getting in touch with us here: www.xlnaudio.com/support
We have recorded samples of "snare buzz" that are triggered whenever the bass drum or the toms are triggered (just like how the snare vibrates along with the other drums on a real drum kit). Go to the EDIT page and click the [SNARE] button in the bottom section. In the lower left corner of that page you have a volume slider for the Snare Buzz. Please try dialing it down and see if that helps.
Hi, I'm afraid that we do not officially support DP, you can see what DAWs and hosts we do support here: www.xlnaudio.com/support/what-are-the-system-requirements-for-xln-audio-products If you would have any questions about this please contact our Support team and they might be able to help you. www.xlnaudio.com/support
@@XLNAudioSupportChannel How is that possible? Digital Performer is one of the oldest and professional DAWs on the market and XLN does not officially support it?
Hi Waldemar; Yes, there are similar buttons in AD1. When activated, the sound of the channel will be routed to a separate output, and no longer be sent to the internal Master Channel.
Hi, is your master fader set to 0? If you need assistance with this then don't hesitate getting in touch with our support team www.xlnaudio.com/support
But you don't need to unfold all 13 channels right? If you just wanted say the Kick you only need to unfold the 1st channel, and maybe the 2nd for the snare, leaving everything else on the main ??
Hi, if you have loaded AD2 as the mulit-output version the plus-sign should be shown on the main channel for AD2 in the mixer. If you are experiencing issues with this still then don't hesitate getting in touch with us through our website and we will be able to give more detailed support over there: www.xlnaudio.com/support
![LOGIC PRO X - Как использовать Drummer Tool (барабанщика) [УРОКИ НА РУССКОМ] 4/12](http://i.ytimg.com/vi/I4MeHa6QkBQ/mqdefault.jpg)
![Jordan Adetunji - KEHLANI REMIX (feat. Kehlani) [Official Video]](http://i.ytimg.com/vi/EeJ8n5PxFGE/mqdefault.jpg)
Thank you so much for taking the time to put this video together...Great work! :)
YES!!! These are the types of vids I was looking for. Please make a video for Editing. I think that would be sooo amazing!
Straight to the point .... thanks !!!
You are simply the best!!!
Thank you very much! That is a great help! 🙏
So what a helpful! Thank you!
Beautiful, thank yooo.
Thank you so much!!!
superb tutorial! visuals in silent mode!
Thanks a lot!!!! Cheers m8
It plays MUSHANGA by Toto (Jeff Porcaro)!
Thank you so much
You guys rock ;0)
You rock! :)
Guys, make sure you load up AD2 as Multi-output. Otherwise you won't see any + or - button in the Mixer.
omg saved my life :)
when I send OH as a separate output, the cymbals are no longer in stereo - if I pan them within AD and the output is master they pan, but if OH has a separate output, the pans don't work
Hi! I made everything just as you said but my separate channels are in strange stereo mode - like left channel for the kick and right for the snare on first one, left for one tom right for another tom on second etc. how do i break it up to mono channels?
Hi Ian,
That sounds strange. Did you click on the small + to add Aux tracks? What does the input say on the first Aux 1 kick channel? It should be called "Addict3". Please send in a ticket via www.xlnaudio.com/support if you need more detailed assistance.
is there a way to have a kick in and out or snare top and bottom mics? also is there a way to add drum leak from other kit pieces?
Hi, yes there is, check the edit-page for the kit pieces and you should be able to set these parameters. If you would have any further questions about this then don't hesitate getting in touch with our Support team and they will assist you www.xlnaudio.com/support
Super, except how do you then bounce each output to audio individually? I want one audio file for kick, one for snare, etc. That would be a huge leap forward with this plugin
Hi, you should be able to do this, we can set you up with detailed instructions on how to achieve this if you contact us through our website: www.xlnaudio.com/support
This is great! But how do I track out each track in logic so I can bounce each instrument as wav files, Kick, snare, hats etc..
Hello, you will need to route the aux/bus channels from Logic to audio tracks and then record those and you should be able to get separate audio files for the indivual channels in AD2. If you would have any further questions about this then don't hesitate getting in touch with us here: www.xlnaudio.com/support
Is there a way to set up multi channel output in standalone mode / without DAW? I'm able to set the separate output option for each channel, but I can't find any routing settings to link these outputs to specific output channels of my interface (Behringer X32).
Hi there Jan,
Make sure the available outputs of your selected audio device is activated in the Audio & MIDI Setup dialouge. Open up the dialouge by clicking on the button in the top left corner labeled "Audio & MIDI Setup". Then check all outputs you want Addictive Drums 2 to have access to. Here's an image of the setup dialouge:
www.dropbox.com/s/m8sy3sq5s62cxbl/audio%20and%20midi%20setup%20AD2.png?dl=0
@@XLNAudioSupportChannel thanks for your answer. so in case i activate output channels 1+2,3+4,5+6 the mains would be on 1+2, eg. kick on 3, snare on 4, overhead on 5+6? or will it always output the mixer channels in stereo? (scenario is, that i want to use my X32 IEM Mixer Scene Presets for my Acoustic Drums AND my Edrums)
In multichannel mode all close mic channels (Kick, Snare, Hihat etc) will be routed to one mono output each, starting with Kick on output 1. Overhead, Room and Bus will be routed to one stereo output each, and last the Master on a separate stereo output.
But how to multiout a stock preset and keep it's origin form - compression on the master bus, etc? To preserve and use it the way it was made! But on separate tracks in the Daw! Im using Studio One 4.5 and when i try to multichannel a stock preset, I end up with some kind of doubled sound - loud and annoying. I don't get it.
Hi, I'm sorry to hear that, please get in touch with our Support team and they will assist you with this: www.xlnaudio.com/support
Hello guys, excelent video! i need your help. I need to convert those aux channels into wav channels (mono for kick and snare, stereo for over and room) how can i do that to treat them separate but as audio. I use logic too. ! if you cand help me would be awesome.! Thank you.
Hi Daniel,
In Logic, audio from an instrument are routed to one or several Aux channels. Even though you can put plugins on these channels, and route them to other Aux channels, I don't think you can record the sound directly.
Here's a work-around:
1. Right-click on each of the Aux tracks in Logics Mixer, and choose "Create track". This will create a track for that aux channel in the arrangement window.
2. Logic won't export a track without a Region in Arrange, so you'll need to use the Pencil to draw a Region on every Aux track (the Region doesn't need to contain any data - just an empty Region will do).
3. Go to the menu File -> Export -> All Tracks As Audio Files.
4. The next pop-up window will something like "10 tracks to be bounced" or however many tracks you have.
Hope you'll find this method useful..
Hello Daniel, were you able to make this happen? I've been unsuccessfully trying for hours to do so... Please help me out if you figured it out. Thanks!
@@jjvillafanemusic Frustrating but useful workaround: send from the Aux back into fresh audio tracks, record, presto - stems for sending to your mixer! There's got to be a better way...
I don't get the small "+" button in my AD2 channel strip after re-assigning Post Separate Out (Post Fader) in my AD2 plug-in per my Logic Pro 10.8.1 app - don't see the individual midi tracks in Logic Pro's mixer? ;-(
Hi, sorry for the slow reply, are you loading AD2 as multi-output plugin? Make sure, you do this and then check the mixer in Logic for the "+" button. If you still need help with this then don't hesitate getting in touch with our Support team: xlnaudio.zendesk.com/
Hi, i did the same steps as the video, but i have 2 problems, in the options to separate tracks my addictive drums 2, only give me 3 options, those are, master, separate output, separate output + master thats all. and no matter which option i select, when i separate them in the logic pro x mixer, i just can have 8 separate tracks, no 13 as show in the video, please help! thanks.
Hi there Juan,
This sounds like you are running an outdated version of AD2. Please run the XLN Online Installer and update to the latest version and things should go smoother!
If you are still having issues with this after updating, please contact our support at www.xlnaudio.com/support with a screenshot of the AD2 mixer.
thank,
now , how i turn this into audio channels to create a mixdown production > that's what i need help with. no shows how to do this anywhere. thanks in advance.
Hello, if you need assistance with setting this up then don't hesitate getting in touch with our support team www.xlnaudio.com/support
Do you know a way to have all the drums on seperate tracks, so you can export them individually?
Hello, you will need to route the bus/aux channels from the separate outputs to individual audio channels and then record those with the "monitor" active on each of them. If you have any further questions about this then don't hesitate getting in touch with us here: www.xlnaudio.com/support
Mushanga :-)
How do I stop mic bleed on direct mics ? Ie: kick drum bleed on snare channel how do it stop it?
We have recorded samples of "snare buzz" that are triggered whenever the bass drum or the toms are triggered (just like how the snare vibrates along with the other drums on a real drum kit). Go to the EDIT page and click the [SNARE] button in the bottom section. In the lower left corner of that page you have a volume slider for the Snare Buzz. Please try dialing it down and see if that helps.
Hello XLN Audio, can you guys put up a video to do this in Digital Performer? Or provide a link where I can read up on how do it? Thanks.
Hi, I'm afraid that we do not officially support DP, you can see what DAWs and hosts we do support here:
www.xlnaudio.com/support/what-are-the-system-requirements-for-xln-audio-products
If you would have any questions about this please contact our Support team and they might be able to help you.
www.xlnaudio.com/support
@@XLNAudioSupportChannel How is that possible? Digital Performer is one of the oldest and professional DAWs on the market and XLN does not officially support it?
How do u set it up in ableton live? Thanks.
We will make a video on that within a few weeks. I'll let you know when it's ready! :-)
Here you go! :-)
ruclips.net/video/7DcCvQtlZMY/видео.html
Dude in my Additive Drums 2 i dont have that pre and post fader options just the master and separate outputs
It sounds like you're using an old version of AD2. Please try updating it to the latest version in the XLN Online Installer.
Hi, can I do this with addictive drums 1 ?
Hi Waldemar;
Yes, there are similar buttons in AD1. When activated, the sound of the channel will be routed to a separate output, and no longer be sent to the internal Master Channel.
On where I can find that pattern? IN which list? thanks
Hello, if you get in touch with our support team, they can help you with this: www.xlnaudio.com/support
why do my drums sound SO MUCH LOUDER when I do this????
and it did sound better before I separated the channels
Hi, is your master fader set to 0? If you need assistance with this then don't hesitate getting in touch with our support team www.xlnaudio.com/support
@@XLNAudioSupportChannel The master fader is set to 0.. I got in touch with them... Hope we will figure it out. Thank you.
what about the cymbals?
The cymbals and ride are recorded with overhead and room microphones. So you will get them through the direct outputs of the OH and Room channels.
But you don't need to unfold all 13 channels right? If you just wanted say the Kick you only need to unfold the 1st channel, and maybe the 2nd for the snare, leaving everything else on the main ??
Hi, yes you are correct, you don't have to use the separate outputs on each of the channels, you can assign it whatever way you like.
@@XLNAudioSupportChannel Thanks.. just purchased AD2 👍
Hello, there is no plus sign
Hi, if you have loaded AD2 as the mulit-output version the plus-sign should be shown on the main channel for AD2 in the mixer. If you are experiencing issues with this still then don't hesitate getting in touch with us through our website and we will be able to give more detailed support over there: www.xlnaudio.com/support
Mushanga