I Build a Big CNC Machine - Homemade CNC Final Part
HTML-код
- Опубликовано: 4 сен 2023
- Hi. This is the final part of the design of my large CNC machine. Today we will align the geometry of the frame, install guides. In this part, the homemade cnc machine will be fully assembled. Enjoy watching!
Hi guys. My name is Mikhail. On this channel you will see a lot of projects on how to make something with your own hands. Projects are different, ranging from simple devices to large machines. Don't forget to subscribe and tell your friends about me. - Хобби
Hope you never, like ever, have to move that beast of a machine! Well done!
Very well done. A great example of building accuracy.
That trick with the CD was genius!
forgive me but you did not build a home made machine you have made a beast!! great job.
You have a ridiculous amount of patience…… well done 👍🏼👍🏼
Jestem pełen podziwu dla twórcy. 👍👍
wow, master project! RESPECT
The sheer amount of love and effort put into this machine is commendable. Very nice setup!
Well done. Thanks for sharing!
eres super bueno en lo que haces trabajando el metal , mi admiración
WAOOOOO ITS AMAZING I NEVER SEE BEFORE
Nice one! I would love to have one myself
What a machine, great workmanship. Thanks for sharing some fabulous accuracy tips,
amazing cnc build !
1:06 now that is a controller I would kill for…😂😂
В шортах и майке заниматься работами со сваркой могут только любители!😆 Надеюсь расплав алюминия разливали в брезентовом, или суконном костюме. Берегите себя!
Frankly that's magnificent. The problem for me would be that building the CNC itself might be more fun and more rewarding than what what I might ever build WITH it. One thing for sure, you're doing this because you want to, not because you need to. A Phantom Shadow is only $23,100.
trabalho perfeito !
Craftsmanship a 100😮 great work
Good work!
BRAVO!!!
Thanks)
Это просто мечта ...
You guys are brilliant
Thank you🙏
One way to check for twist is to use the two wires method with a multimeter set in continuity mode. Hook one end of one wire to the positive lead and the other to the negative lead. When the two wires touch, you'll hear a beep.
Neat
this is a beast 🙂
So satisfying
Very impressiv 👍👍👍
Мистэр, великолепно😊
Well done
The technique for aligning and squaring the rails with common shop equipment (other than the beam straightedge which isn't common) is pretty brilliant. I have been stumbling over how to do this in my garage. I also never thought to align the cross table supports to the already installed gantry and z axis assembly...that will be a real time saver. I am wondering if Mr. Craft is a Millwright to have such knowledge?
Until you price the beam straight edge then your back to square one (at least I am)
Beautiful
well done M craft loving your machine looks supper cool and well built😀
very good thanks
Cool trick with the cd
Smart guys
Great job ❤❤ super
My build would be so much easier if I could find a deal on a nice beam straitedge like that! Is he using the CD reflection to make sure he is running the drill motor perpendicular to the plate? Thats pretty cool.
muito bom, estou iniciando a fabricação da minha cnc plasma.
"Что ты здесь ходишь всё вынюхиваешь" 😂
very nice !good job!!
so good
Keren❤❤❤
Nice work👍👍👍
Hello my friend. Well done
respect
Асом. Амэйзинг))
Congratulations, very good ! If you use hiwin linear rails results will be better!
You should hook a vacuum system up to the CNC.
после слов (Что ты здесь ходишь всё вынюхиваеш) я немного напрягся :D
Я тоже повелся сначала, думал ребята заграничные, но когда услышал песню (бухгалтер) 😅
Fantastic video very well done using minimal tools to make it. Only concern to me is if you need to move it to a new house you will have to hack it apart to get it out lol
no word on movie, no word at comments :) great job sir :) This is not elementary book of machines... go to school ladies ;-D
The CD is a brilliant trick
This device now owns that room because there is no possible way to remove it. Nice.
Yes there is, you dissasemble it and move it. Have you ever built something? If you have you would know and if not, than learn.
оо, краска от пачанов
That’s awesome. We want to see more! What can this thing make?
Also I want to know how you installed a vacuum system on this.
сделано отлично, но большой жесткости не ждите от этих направляющих.
Nice Video! I agree with the other comments - you do have some nice “tricks“ for the assembly. I'll have to try the CDROM method sometime.
BTW: Where did you source the Spindle? Are you happy with it?
Topp
When I do the crossed cord height alignment I always use two cords in one of the directions. The other crossing cord then passes between them. You can then see exactly when the heights are correct.
man i am 3 min into the video and those two hacks with the cd and the thin wire.....niiiiiice i love them
Niubi!
nice build....the techniques you used is clever......which type of stepper motors are you using?
Excellent work, I loved the CNC and it's envious, post a video of it in real work so we can enjoy this work. By the way, what was your total expense? Compared to one sold on Aliexpress, how much was the difference, besides of course the pleasure of creating it? Congratulations! I hope you make good use of it!🙂
great work!
I would however have a question, why did you choose the rack and pinion system, rather than a ball screw system?
Machine too big for ballscrews, he need 25mm diameter for such length
Хочу такой :)
Спасибо, очень познавательно! Подскажите как добивались прямого угла, между осями Х и У и Z ?
wonderful machine, friend, why at minute 3:30 do you use some threads, what is the objective of these threads?
Beautiful machine. If I were to build one, I’d make it so that the legs can be removed and the entire frame for that matter. This machine was apparently built in a small room which means they’re going to have trouble getting it out should they decide to move. They will most likely end up knocking down a wall. Anyway, all the best of them.
You just use a grinder
It not homemade..it factorymade
what do you call that long bar that used for leveling?
Greetings friend. I have a question, do you also use a creamyera in the Y axis transmission?
hola estimado saludos desde peru que medida de cremalleras utilizo para su proyectó
Good job, how did you solve the software side? Did i miss?
hi great machine, i have a question, where do you get thr rails of this machine
What is the thickness of Ms sheet for y gantry?
Здравствуйте! Не понял момент на 3:36. Плоскость не получилась, раз нити разошлись? Плоскость вдоль оси У вы выровняли по линейке на краску. А как же плоскостность вдоль оси Х? Или конструкция направляющих по оси У допускает самоустановку?
А, вижу, что наоборот плоскость получилась
Да тут много моментов на самом деле, видео как будто делают одну плоскость и получается перекос потом они вторую плоскость Российской поверочной тоже ровняют а между собой плоскости наверное сами собой должны выровняться?!!))
What was the strength quality of aluminium when compared to metal is this last long.
Hello. Everything is beautiful and interesting. Question ? Maybe it would be better to buy a ready-made factory machine and start earning money right away! What to do with a stupid job?
It depends on how you want. Some people like homemade food and some likes to eat at restaurant.
please tell me belt timing pulley gear ratio for Y axis
please tell me belt timing pulley gear ratio i think 1 ,2
why no using guiide liner , level using leser beam
Здравствуйте! Обратил внимание, что по осям X и Y у Вас к зубчатым рейкам шестерни прижимаются пружинами. Насколько такое уместно? Разве это не создаёт огрехов в точном позиционировании под нагрузкой?
Боковые детали каретки так и остались на прихватка?
What is the weight for the X axis bro
What is the size of the cutting area on this machine? X and Y
Советская школа
Михаил?
Yep)))
Nice, you stole the Idea from New Yorkshire Workshop and made a great Job. I love such Videos of "Low Budget Selfmade High End Stuff" thats works really really nice!
Berapa ukuran mejanya?
2000х2000mm
Oke.. Terimakasih
РМЦ =)))))
So funny u straight the rail place , to use a shitty sbr rail ....
Muito ruim.
@2:06 did you have Diarrhea?
I mean, it is a nice build. But sorry to say, It hurts me so much to see you weld without any protective gear for your hands and that you spray paint WITHOUT any mask. Please, never spray paint without wearing a mask... Breathing in that toxic stuff, not good. Got the money to buy the metal and all the components needed, guess you should spend a little of that money for your own health. Also to teach other people that are watching your video. Can get really sick from that shit.
Верно подмечено .Но могло и не хватить денег .Да и люди не задумываются о последствиях .Себе уже купил классный респиратор .Осталось купить разные фильтры .Довольно дорого но здоровье дороже .Всех благ!
Homemade DIY🤡