#CATIAV5
HTML-код
- Опубликовано: 9 сен 2024
- Timestamps:
21:38 - Missed Creating Planes between the Tip chord and root chord, Hereby Video will helps you resolve that Problem.
LINK : drive.google.c...
Timestamps:
00:20 - Deleted the intersecting point with Spars
01:27 - Stringers No. 1 Creation
21:55 - Leading Edge Rib Creation
30:42 - Copying the Leading Edge to different sections of Wing
This video is combination of Stringers and Ribs, in previous video I have explained all the necessary things, do check out
share:: • #CATIAV5 | PART 3 NACA...
==================================================
Aerofoil Making in NACA Series
Link:: • NACA Series importing ...
==================================================
Spars and Stringers video
Link:: • #CATIA V5 | PART2 NACA...
Spar is a heavy beam running span wise to take transverse shear loads and span wise bending. It is usually composed of a thin shear panel (web) with a cap or flange at the top and bottom to take bending. Ribs are also supported by span wise spars. The air loads act directly on the wing cover (skin) which transfer it to rib which further transfers load in shear to spar webs and distribute load between them in proportion to web stiffeners.
====================================================
The stringers and spars are attached to the skins by lines of
rivets, spot welds or perhaps bonding. These joints will be
called upon o transmit forces mainly along their length. Forces
parallel to skin and directed at right angles to stringers will be
limited by torsional flexibility of these members. Forces
normal to the skin will be limited in magnitude by small
bending strength of skin and stringer.
====================================================
Ribs are having a sole purpose of holding the frame and covering along with bearing all the stresses generated in the Wing during the flight operartions like bending moment, compression, tension and torsion as twisting moment.
=====================================================
I have used this combination of RAM and Graphics
Must check out
I have MSI laptop best for Gaming and Computing Softwares
Designed a Aerofoil shaped Wing of an Aircraft using points generated from excel sheet.
Its 4K video that helps one to get the accurate content for desiging the parts..!
The main motto is to develop the skills of Engineers.
Exporter to CATIA V5
drive.google.c....
NACA4 digit Excel Sheet
drive.google.c....
Share this video:: • NACA Series importing ...
SYSTEM SPECIFICATION
Processor - i7 7700 HQ @2.80GHz
RAM - 16GB (DDR4)
Graphics - GEFORCE GTX 1050
I could watch these things all day!!
Amazing stuff and great video description as well.
Please continue making videos on aircraft components.
🙂 Thanks for support
Happy Learning..!
Thank you so much
You're most welcome
What a great explanation. Is it possible that you make the ribs with Power copy and set parameters into power copy? Would be great if you upload it. Thank you!!
Yeah possible but sometimes things won't work accordingly..! So better to go with conventional method.. ! 😊 glad you shared.. !
Magic of Design Softwares yeah I have been thinking for my college task and to create rib as power copy model and will be applied to a wing but certainly simplified wing.
Happy Learning!
I using this method all the time, if the model is rigtly defined, there's no surprise ruclips.net/video/4V2dTbR5j3Y/видео.html
Good , You Save me hehehe ... I following you and subscribe !!
Well, glad that you did it!
Happy Learning😇!
Must share your valuabe comments and any questions,
I'll answer and improve things
Happy Learning!
I have a suggestion. You can place the rear spar web along the path define for rear spar. This will ensure spar does not intersect stringers. Let me know if I am wrong. And you did a good job bro. I am doing the same design in Solidworks. Thank you !
Yeah, it will work. I have done with simple and conventional way. However you can improve surely 🙂. I hope this thing will inspire you.. ! Good Luck 🍀🤞
Great job brother :)
Thanks petar boskovic ☺
Happy Learning
good work
i am not able to do the trim for making stringers
any other option?
Hey 🙂,
1) Follow the procedure again and see accurately or download the video and see it on laptop screen.
2 ) Use proper geometry and value for trim then maybe your problem resolves.
3) if nothing works then send me mail with picture of your problem I'll surely help you , vishalpatil910087@gmail.com
i have created a tapered wing section in which the leading edge is not in a straight line it is tapered i cant able to make plans along the leading edge can some one help me on this
drive.google.com/file/d/1wrKEoBxs4UrGdiinEial8Q9wi_ibqfRO/view?usp=drivesdk
See this link already there...
In the description....
You can go and check how to make planes at leading and trailing edge.
Rest if you still find difficulties mail me I'm glad to support you... It's very appreciated that you are trying your best to learn designing and engineering.!
Happy Learning..! 😊😊
Sir, how to import to abaqus and assembly in abaqus, and the following is the analysis
Go in Catia __ save as to __ change file format you Iges format__ save at a location__go to your abaqus software__then open it using import command
Hello! I did my ribs as you explained but my leading edges passed through my main spar! Can you help me, please?
Hey,
Mail me at vishalpatil910087@gmail.com
So I can explain further to you..
Have a nice day and Happy Learning. 🙂
@@magicofdesignsoftware4079 Thank you so much! I just sent you the email 😄
Yes, I got it.. ☺
Why you don't use power copy?, you'll save tons of time...
Yes, you got a point.
But according to requirements I choose to do this like that!
Rest you can surely use power copy command.
Happy Learning 😊
Can we create stringers using user pattern?
Nope I guess ! but yes there are ways by which one can do but results in to mess or error, Better to go by conventional way
Happy Learning, Thanks for support!
Hello, I can not make ribs...it appeared "The centre curve must lie on the reference surface" what could be the problem?
Send me a picture of it at vishalbharatpatil4@gmail.com I'll solve your problem!
Have a good Day 🙂
@@magicofdesignsoftware4079 Very grateful for your kindness.
Thank you so much 😊
Hello sir
Im not able to get split commmand active it is showing deactivate 27:00 after drwaing sweep of cavities
Sir plz reply fast sir
Just re do the steps it will work
How did you make to appear that planes at min 21:47?
Oh Yah , I miss that part,
Do one thing go for planes between planes command, select the leading edge and trailing edge plane choose the number of planes is 5 .
It's simple, you can do it
If won't, mail me at vishalpatil910087@gmail.com
So I can help further
Happy Learning 😊
@@magicofdesignsoftware4079 Thank you very much! You are great! Have a nice day!
@@Alex-te9ds very glad to help you.. ! Really appreciated your efforts in studies..
Happy Learning😊
Also you can check in description there an video to resolve it.
I cant find sweep surface ikon
Well, no problem I'll direct you to sweep!
1) Go to ther left upper corner, there you see the option named> Insert >>Surfaces >>Sweep.
Rest all the commands you can find at left upper corner.
2) If you still find any difficulty, mail me at vishalbharatpatil4@gmail.com
Happy Learning 😊😇
I got some some problems while making a creation of the reab. I don't know how to explain that but if don't mind, I can send by the email, So you could help if possible . Could you give your email adress if don't mine ?
Yes sure, I'm here to help you guys.!
Here is mail address
vishalpatil910087@gmail.com