@@TheRocco587 Tinyhawk most likely has a worse vtx than the crux3 & considering the crux is an outdoors quad it should be just fine 👍 I can't speak for the transmitter as I'm not sure what protocol they use
Worked late and picked mine up today ! (UPS store) Charged a couple of batteries I ordered with it and got out just after sunset. She flies nice and when I put her into acro ! Holy cow, she rips balls !!! :-) Can hardly wait until Saturday !. I'm in Hillsboro. Great deal for what you get ! Your review helped me decide to purchase it. Thank you Justin !!! :-)
@@liam4686 not sure, one motor quit spinning :/ Wrote NewBeedrone. Hoping they'll send another. Later, playing on betaflight, I got the motor working and flew 2 packs. Next morning, the motor quit. Ordered a new motor frorm RDQ. Will replace it when it arrives. Super bummed because I was totally loving that little toothpick. Kabbab said in one of his review, I think on the Larva X, that Happymodel does not have the best reliability.
Great overview Justin. I just ordered a HX100. Now I am second guessing my choice. How does the Crux3 compare to say the Tinyhawk II Freesyltyle? Preference?
Im just gna say it. It flies fine. Toothpicks especially with Happy model motors aren’t very tune friendly. You will always have some oscillations in just about every build if you push it hard enough. Don’t chase your tail and just enjoy flying.
recently purcahsed one ... maiden the next day and then purchased another one because the first one went straight to a river due to motor desync ... anyone had the same experience? All stock BF and BLHeli settings.
Grant R Been waiting for your review on this little ripper, I’m thinking about pulling the trigger on the crossfire version ..Do you think FPVcycles TP3 is worth the $100 more Cost? Thanks Justin
I built a tp3 and have literally replaced 4 AIO boars in the last 5 months. Even used some 30amp boards. If you actually fly hard and push the limits I recommend a 3in that uses a 20x20 stack. Just soo much more reliable imo
I understand every gram matters when it comes to micros but why do these companies refuse to put 20x20 stacks in their 3in builds? I'm so tired of replacing AIO boards on my tp3.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
My man Justin Davis again another great review thanks for your work.
Thanks Shawn bro 😎 🤘🏻🤘🏻🤘🏻☀️
Should I get this model or the tinyhawk freestyle 2? What's your recommendation.
Thank you for the review. I was looking for the next logical step from my Tinyhawk without spending a fortune. You pretty much made up my mind.
Did you end up using the Emax goggles and transmitter with the crux3? If so how did they hold up?
@@TheRocco587 Tinyhawk most likely has a worse vtx than the crux3 & considering the crux is an outdoors quad it should be just fine 👍 I can't speak for the transmitter as I'm not sure what protocol they use
Worked late and picked mine up today ! (UPS store) Charged a couple of batteries I ordered with it and got out just after sunset. She flies nice and when I put her into acro ! Holy cow, she rips balls !!! :-) Can hardly wait until Saturday !. I'm in Hillsboro. Great deal for what you get ! Your review helped me decide to purchase it. Thank you Justin !!! :-)
@@liam4686 not sure, one motor quit spinning :/ Wrote NewBeedrone. Hoping they'll send another. Later, playing on betaflight, I got the motor working and flew 2 packs. Next morning, the motor quit. Ordered a new motor frorm RDQ. Will replace it when it arrives. Super bummed because I was totally loving that little toothpick. Kabbab said in one of his review, I think on the Larva X, that Happymodel does not have the best reliability.
how did you bind it
Hey if u dont mind.. do u recommend this over geprc phantom analog version? Thnx
Crux is lighter and more nimble. Get a Crux bro.
@@dronecamps great! Thnx.. now i have to order.. 😇
Its beautiful Justin!🇮🇪👍🏻
Good review, but I would have been really interested to see what you thought about the handling with a Go onboard, and see that footage too.
Hi Justin. I have one to it flies great but mine is a but fluttery on agressive turns. Did you tune yours? And do you have the cli dump?
Question can I fly this with a regular DSM-2 4-channel remote?
What is main difference with SailFly? I see similar performance.
Can't wait to receive this and the Mobula 6
hi justin what is faster between Crux3 and Betafpv HX115?
Crux for sure
What was the speed in KPH or MPH? Either way 90kph is insane; if it went 90mph that would be nuts
Great video does this need bataflight and if it does which FPV quads could u recommend that don't need betaflight at this price range pls reply thx
Would a runcam split 3 whoop and mobula6 canopy fit to save weight and get a lil hd
Great overview Justin. I just ordered a HX100. Now I am second guessing my choice. How does the Crux3 compare to say the Tinyhawk II Freesyltyle? Preference?
Little faster and more locked in. Freestyle is a good beginner freestyle quad though.
I pre-ordered weeks ago. I would love a tune. Thank you.
Im just gna say it. It flies fine. Toothpicks especially with Happy model motors aren’t very tune friendly. You will always have some oscillations in just about every build if you push it hard enough. Don’t chase your tail and just enjoy flying.
recently purcahsed one ... maiden the next day and then purchased another one because the first one went straight to a river due to motor desync ... anyone had the same experience? All stock BF and BLHeli settings.
Damn should have grabbed mine. Got one here id sell you for much less! 🤘🏻
@@dronecamps please! let me know the details
Grant R
Been waiting for your review on this little ripper, I’m thinking about pulling the trigger on the crossfire version ..Do you think FPVcycles TP3 is worth the $100 more Cost? Thanks Justin
Build the tp3
I built a tp3 and have literally replaced 4 AIO boars in the last 5 months. Even used some 30amp boards. If you actually fly hard and push the limits I recommend a 3in that uses a 20x20 stack. Just soo much more reliable imo
Crux
Im wondering if this is a better choice for 3" than eachine twig......?
Anyone?
Nice! How does it compare to the larva X?
@@slowentropy4531 thank you 👍
This is definitely more durable than the larva but doest not preform as good
can you use Lion battery?
Why Not???
@@Nici619 you've tried it?
Maybe enercig 13A 650mah 14500 Li Ion
Hey love your videos, which tabs should I be looking for soldering my XM+ up to this board? Please help 🙏🙏! Cheers
Great video👌, does this come with a radio by any chance?
Thanks no
thanks i see it
Id love to be able to fly like you Justin! Wow
Thanks bro. I appreciate that my friend.
Nice, what is the weight?
Is it faster as the reddevil ?
Its summer why the winter hat burr....
… Oregon ….this video was made month ago not summer ;)
insta 360 would be cool on that
Awesome vid! But I believe it is pronounced "Crooz" : ) At least you;re not Austrailian and pronounce Z as Zed : )
I understand every gram matters when it comes to micros but why do these companies refuse to put 20x20 stacks in their 3in builds? I'm so tired of replacing AIO boards on my tp3.