Omg I did the exact same thing because I thought you could use the ink for both and of course not lol. And I got so excited to finally be able to buy one. So I have a brand new printer and I haven’t used it yet even though I thought about using it for stickers but really wanted to use it for tshirts. So basically I just have to get the printer open and and squeeze out all the ink into syringes? Do you have to put anything in there if you have like just a little bit left after you squeeze it out? Or are you good to just put the new sub ink in it?
Thank you so much!!! I just dropped tears because I had both inks next to each other and used the wrong one n I just bought the printer thank you so much!!!!
Thank you for this video. I was not having your problem, but had two clogged lines. Your video showed me how to get inside the printer and extract clogged ink to get the printer ink flowing again. Whew, I thought I was going to need a new printer. Mucho gracias.
My problem was I was in a rush to use mine so I bought the cheapest sublimation ink not knowing it made a difference which was over a year ago. Now that I’m learning I ordered different ink and just been sitting on it cause I couldn’t find a video that went at my speed and I understood until I FOUND YOOOOOUUUUUU 😊 THANK YOU SO MUCH ☺️ for your video! I have pulled the cheap ink out and Hipoo ink in now I’m hoping I see a difference in my prints. #suscribed
That’s crazy it’s like the dark colors worked straight out the sub ink containers but the lighter colors needed to be transferred! 🤔 but thanks for this thorough video, I actually came after the scanner error video! Thanks for that one too! Life saver! Stay safe and keep being a blessing!❤
Thank you so much & I have to make a Red Velvet cake tomorrow. Let me know how it turned out for you.😊 And the oven ribs are definitely the best method. Perfect every time!👌🏽
i converted mine but did not take black piece off (too much headache) just used propped up and had to squeeze the ink cartridge out one at a time..and slide them all out
Your Awesome ❤❤ Gosh! I did the same thing used my printer for sublimation. Done with all that! What a mess to get it all out only difference, I'm tossing out the Sub ink. Just want it now for a regular printer Thanks for the video 👍👍
1st i want to say thank you for making this video 2nd plz forgive my punctuation or lack there of lol! ok i just got the epson 15,000 and stupidly put in the original ink as well and I'm curious how ur print came out afterwards? did you have issues with the adjustments or did you have to make any like to ur settings ? thank you so much for ur time 💕💕
I just bought the 4850.. I'm confuse to which ink should I buy 😮💨😅.. which one are you using? I see on some videos they are using 502 but if I Google that here in the netherlands, the one that comes up is 102.. hope someone can help me please.. have a wonderful day and thank you in advance ☺️
I did this initially but couldn't do it the 2nd time...so I just printed a few sheets (on the same sheet of paper to save paper) to get the ink through.
Did you keep the directions for the printer to recharge the ink? This is something I didn't have to do because it did print. But I did realize I was printing on the wrong fabric for the sublimation to transfer & not wash out. Lessons learned during this process...lol.
Process Starts at 3 Minutes into the video
thank you so much for posting this video lol my daughter asked me to start her own printing business and we did the same thing sigh lol.
I accidentally added regular ink just a small amount but it’s contaminated to my sublimation printer, should I empty and refill?
Omg I did the exact same thing because I thought you could use the ink for both and of course not lol. And I got so excited to finally be able to buy one. So I have a brand new printer and I haven’t used it yet even though I thought about using it for stickers but really wanted to use it for tshirts. So basically I just have to get the printer open and and squeeze out all the ink into syringes? Do you have to put anything in there if you have like just a little bit left after you squeeze it out? Or are you good to just put the new sub ink in it?
Thank you so much!!! I just dropped tears because I had both inks next to each other and used the wrong one n I just bought the printer thank you so much!!!!
Thank you for this video. I was not having your problem, but had two clogged lines. Your video showed me how to get inside the printer and extract clogged ink to get the printer ink flowing again. Whew, I thought I was going to need a new printer. Mucho gracias.
You're welcome! It all leads back to the source. Glad it helped you.😁
My problem was I was in a rush to use mine so I bought the cheapest sublimation ink not knowing it made a difference which was over a year ago. Now that I’m learning I ordered different ink and just been sitting on it cause I couldn’t find a video that went at my speed and I understood until I FOUND YOOOOOUUUUUU 😊 THANK YOU SO MUCH ☺️ for your video! I have pulled the cheap ink out and Hipoo ink in now I’m hoping I see a difference in my prints. #suscribed
Is it possible to empty the ink through where you can refill them? I’m terrified I’m gonna break it lol
Thank you for showing how to do this. Like you, I was too excited before I realized I should have put the sublimation ink in.😅❤
You are so welcome! When I get too excited about things...I remember this.😄
Thank you for this video. I got all excited and when putting the ink I put Cyan into the Yellow🤦♀ wasn't much but had me freaking out. Thanks again.
That’s crazy it’s like the dark colors worked straight out the sub ink containers but the lighter colors needed to be transferred! 🤔 but thanks for this thorough video, I actually came after the scanner error video! Thanks for that one too! Life saver! Stay safe and keep being a blessing!❤
Btw… I will be trying that Red Velvet Cake & Icing and The Ribs. We’re gonna have a good Sunday Dinner coming up soon!!😂🤣👏🏾❤️
Thank you so much & I have to make a Red Velvet cake tomorrow. Let me know how it turned out for you.😊 And the oven ribs are definitely the best method. Perfect every time!👌🏽
How did you get the hinge piece off? I’m having a tough time getting the top to lift!
There was a very tiny screw on the top left...were you able to remove this?
I tried doing like you did in your video, but I couldn't get the latch loose. I tried everything. What is the secret?
i converted mine but did not take black piece off (too much headache) just used propped up and had to squeeze the ink cartridge out one at a time..and slide them all out
Your Awesome ❤❤ Gosh! I did the same thing used my printer for sublimation. Done with all that! What a mess to get it all out only difference, I'm tossing out the Sub ink. Just want it now for a regular printer Thanks for the video 👍👍
Same here now! 😄
Omg I found someone like me 😂
That’s exactly what I did, I assumed the regular ink will work lol
1st i want to say thank you for making this video 2nd plz forgive my punctuation or lack there of lol! ok i just got the epson 15,000 and stupidly put in the original ink as well and I'm curious how ur print came out afterwards? did you have issues with the adjustments or did you have to make any like to ur settings ? thank you so much for ur time 💕💕
You are welcome & I didn't make any adjustments. I did print a few pages to run the ink through.
Did you ran the printer before you added the new ink?
This helps me soooo much! I was excited and did he EXACT same thing!
Thanks & it happens! 😆 I have learned to slow it down.
I did it too. I didn't know you needed different ink either.
😂😂me to I was excited...then boom I need to drain old ink...& here I am watching this video
did you have to clean the cartridges before putting the sublimation ink in
I didn't...just drained them. Now I plan on going back to the original ink.😁
I just bought the 4850.. I'm confuse to which ink should I buy 😮💨😅.. which one are you using? I see on some videos they are using 502 but if I Google that here in the netherlands, the one that comes up is 102.. hope someone can help me please.. have a wonderful day and thank you in advance ☺️
I have added most of what I used in the description. Hope this helps & hopefully it's still available. Thank you & you're welcome.
thanks keep up good work
You keep it so real thank you for that 😊
You are so welcome
@@allthingsphyliciaI followed these instructions but now my printer is printing blank pages 😮 did you have this issue if so what did you do to fix it
How do u get it to reprime the ink?
I did this initially but couldn't do it the 2nd time...so I just printed a few sheets (on the same sheet of paper to save paper) to get the ink through.
Im having issues with my sublimation ink charging. Its printing blank pages. Any recommendations?
Did you keep the directions for the printer to recharge the ink? This is something I didn't have to do because it did print. But I did realize I was printing on the wrong fabric for the sublimation to transfer & not wash out. Lessons learned during this process...lol.
How do I check connection? I think I ripped them out?
I can't get the printer open by the ink
I'm having hard time getting ink out of it
How do you know when to refill ink
You should be able to view it from the front. And may get an error message.😁
I just did the same thing. Got the same printer and put the ink in then was googling and Realized I need sublimation ink.
I feel your pain I just found I needed SUBLIMATION INK! Ughh now to start the process 🫠
Let me know how it goes. I was pretty smooth once I found the right syringe.
I did the same thing you did. Knowing me I’m gonna fuck my printer up! 🫣😵💫🥴