Super handy and easy to follow instructions. Thanks! I wish Creality made their firmware release notes more easily available so we can see the changes being made or new features added.
Wow, thank you. I'd watched 4 videos about firmware installation and none of them gave me the confidence to just do it but yours did. It helped that the printer I'm working on is the same as the one you used for the demo but the way you explained it was so helpful. I've turned a ded printer into a fully operational printer again. Thank you. My symptoms were that it would power up and just buzz with nothing on the screen. I could tell the screen was getting power but it wasn't displaying anything. The owner had mentioned that there might be a firmware problem which he couldn't resolve so after checking the power supply I decided it needed to be flashed. I flashed it and it seems to be back to full working order. Gonna do a test print now, very exited cus I've never used an Ender before. Thanks again.
Would definitely like to see that as a follow up video. From what I've seen, the new creality firmware offers live retraction setting adjustments which could be a game changer.
Thank you! my I got my ender from my dad, and the screen wasn't working, and I couldn't find any cracks or damage, so I thought installing the firmware but I wasn't sure how. Thank you so much for this thorough explanation! it brought it back to life yay!
A bit late to the table... Thank you for this video. I always wondered how to upgrade the screen firmware so it can support thumbnails. Now I do. So thank you very much. Many people think you are just covering old ground, but infact you are helping new guys, or old guys to check that final box on how to. So here is my check on how to, find the micro SD card slot on the screen. FYI, I have 2 Ender 3 S1's, and they come with the Ender 3 V2 touch screens
Thank you very much, you brought my Ender3 v2 back to life with your instructions. The only tutorial that brought success so far. Thank you and great video. Many greetings from North Germany. Wolfgang
OMG I LEARNED SO MUCH. i had been struggling with the firmware until you saved the day with the chip breakdown. fixed and printing strong after 6 hours of searching and testing and troubleshooting.
Next to the BambuLab is also my Ender 3 V2 which is still in use. With this great video it was very easy to update the firmware, so this printer does not have to collect dust. Please continue with these types of videos!!!!! Good work as always, Thank you very much Mr. Bryan Vines
Thanks. E3v2 stok 4 месяца. Доволен. Смотрю уже не первое Ваше видео. Спасибо ещё раз, Вы очень правильно, на мой взгляд, рассказали основы и порекомендовали удобную прошивку в ранних видео. У меня интересный факт, деформировалось стекло - ультра база в середине. Использовал лак для волос для адгезии. Придётся теперь из обычного стекла делать пока что. Доброго
WAO!! i fallo step by step all the instructions and in les than 5 minutes all my 2 weeks problem despair. i cannot thank you enough, i will definitely subscribe XD
I just watched the video and realized I had flashed the incorrect GD firmware to my SMT board. With any luck, the original firmware can be restored. I have now upgraded the printer and display. I appreciate your support and the excellent teaching.
Good information Brian. One thing, I updated my two Ender 3 V2 printers to Jyers firmware and Jyers display software IAW your video on that. Which is better and which do YOU prefer? Thank you.
Thank you. I just installed a CR Touch and could not figure out why my machine wouldn't update. Finding out the GD means GigaDevice told me I was using the wrong file. It works now. Much appreciated, have an upvote.
If you're looking for an updated Jyers version, try using Jyers Enhanced. Someone basically took Jyers firmware and added a bunch of features you can enable, disable, or change on the fly using the printer's display.
Great video and super-duper easy to follow instructions. I have only 1 question: how to choose the right firmware if I get a 4.2.2 mainboard (not GD) and a CRTouch probe?
Thanks so much for your video! I thought my screen was bricked but you saved my printer! It turns out I installed the firmware for the incorrect type of chip, plus my MB was 4.3.1 which confused me :/. I never thought of looking for the firmware files from creality cloud. I was looking for them in the main creality website and the package there don't have any descriptions. Thanks so much again!
If i don't update the screen will change something on the faction of the printer? My printer have exactly the same mother board and i installed the same firmware like in your printer
If ive already updated to the same firmware you are using, but I wanted to add a BLTouch, which firmware should I use? Also, do I need to reupdate the screen as well? I literally have the same board and printer as youre showing here. 4.2.2 with SM controller. Just adding BLTouch only, no filament sensor or anything.
Great Video Brian. very detailed and helpful. Question. Does the chip need to stay in the printer or can it be removed and everything still work as it should.?
Great video, thanks. I'm also trying to update an Ender3 with a V1.1.4 board. Any idea where I can find the files for that board. I looked on the Creality site but see one. Thanks again.
I was sort of surprised that you're going back to Creality firmware after a push for Jyers almost a year ago. Why not Mriscoc since it was essentially built off Jyers work?
Thanks!! I tried installing my sonic pad, and I couldn't get it to communicate with my printer. When I disconnected it, and tried to use the printer without it, it was bricked. Thanks for showing me how to reflash my firmware!!
Byran, not too long ago you strongly recommended the Jyers UI firmware as being the best for the Ender series printers, would you please tell me what has changed, I am a little confused !!!
I don't think Creality's firmware could ever be better than a third partys. Although, you could upgrade to "Jyers Enhanced", which is basically just a more up to date Jyers firmware with a bunch of extra features you can enable, disable, or change on the fly.
It should be possible for the board to self report its processor and its board version number and store that in About/Info. but this is Creality we are dealing with. Bryan do you know what new features/benefits the new firmware has? I realise Creality wont release any meaningful information regarding this, you count yourself lucky if they release the source code. Bryan I have been meaning to ask, do you print your T-shirts?
I liked the in depth information regarding the chip as I have never been successful with flashing the firmware. Mine has the DB chip and I used that but now there is a high pitched noise from the control board and I have not been able to change it whatsoever. If you have any suggestions, that would be great. Thank you.
Wonder if I need to update. I have GD 4.2.2. without BLTouch. And firmware version 1.0.8 from stock. It's looks fishy on their website because only file for GD 422 without BLTtouch include 2 firmwares versions 1.0.4 & 1.0.5 it seems like downgrade for me (not talking about that 1.0.8 isnt even there) am I tripping?
Thanks! I’m following all the steps, but the printer does not update the firmware, once the card is in and the printer is turned on!? What can be done??
Thanks, you are the only one who explains what is the GD firmware. I almost installed that version in my ender that has the other chip!! Gracias, sos el único que explica qué es el firmware GD. Casi instalo esa versión en mi ender que tiene el otro chip!!
I made a mistake. I neglected to format the address card before putting the files in. It had some prints on it. Now the printer is forever stuck on the black screen. Is there a way to fix it?
I got the spider hot end but haven’t yet installed it. Would the “sprite” option be of importance since it’s temperature set fall more in tune with the ceramic and all metal hoopla? 🤷🏼♂️
Your video is as usual very succinct. Mine is still stock firmware 1.0.5. I have a GD processor on 4.2.2 board and no ABL. As such it seems only one possible firmware option for me. I wonder what that version is because unfortunately Creality doesn't indicated that in the name. Is that 1.0.7? Or is it still the same 1.0.5 as what I already have?
ok mate great channal iv just followed how you up date the firmware all good here BUT when I set the nozzle temp and bed temp then I get a alrm comes on saying nozzle or bed temperature it to low so mate I need help
Is the Creality latest firmware Version preferred over the Jyers Update? Does the Creality version support M600? They seem to never get that right... LOL
Hi i love your videos and i have a Ender 3 that i have swapped a 2.2.7 mainboard and put the sprite pro extruder with a cr touch. i cannot find a firmware that covers all of these, would i have to write my own or what would you suggest? thank you!
Hi. My machine is set up a little different that yours. My machine doesnt have the MicroSD card in the control panel like yours. My mother board says Creality 4.2.2 and the other card is a gigo device. Because my machine doesnt have the MicroSD card in the control panel I inserted the firmware which was the 4th one down for the GD system into the MicroSD Card slot in the front of the system. Now my screen is blue. So I then downloaded the same files that you did and my screen is still blue. It was working prior to trying to update the system watching your video. The only reason I wanted to update is that it would only print if I loaded a Gcode file and not an STL file. I am new at this 3D printing. Any help would be appreciated.
Thanks for a great easy to follow video. My ender3 has a 4.2.2 motherboard with a GD micro controller so the file i downloaded did not include the display firmware update files. Can i use the display update files included with the SW download set or would that cause a compatibility issue?
Great video, well explained. i am a regular resin printer ... just bought an ender 3 v2 ... i have modded some stuff , springs, firmware , magnetic plate ... and i have printed some stuff, some better than others but ... i think i m not liking the times, quality .... maybe i just hit on a wall ... i bought abs from hatchbox ... the thing DOES NOT STICK to the plate ... ive added tape, changed the plate ... but the thing does not work ... and i feel like ... fdm print is a total pain in the "you know" .... could you give me some advice? maybe staying away from abs ... dunno .. hope you keeo doing your great videos. peace!!!
Hey guys! I need a little bit of help. I bought for my E3 V2 an E3 Free-Runs TMC2209 32 bit motherboard and I cannot make the screen connect to the printer. The printer has an CR Touch and a Sprite Extruder. Can any of you please provide me some guidance? The Creality instructions are scarce and are not providing any real guidance. Thank you!
Amazing video, unfortunately my Ender-3 v2 Neo has a 4.2.2 motherboard version with a GigaDevice, combination for which there are no drivers in the Creality store. And I've tried other similar ones but regardless of what I do my display shows the creality logo with the temperature numbers kind of half displayed and realtime updated at the bottom (where they should be) but the menus don't show, it's only the Creality logo. Really pitiful experience. Also a bit ridiculous that standard procedure expected from the customer is to screw open both the motherboard and the display.
do you know if their new firmware will support cura pause at layer height, I know the stock version I had did not, so I went to MRISCOC, but now upgraded to a Sprite hotend, and need to get the 300C function, but no BLTouch.
I did the exact way he did to format my display and now it is buggy and missing all the normal blue color. Any suggestions would be greatly appreciated. thanks
i know this is a older video but i just was given a ender3 v2 with a sprite hot end and i downloaded the file with spritext in it and when installing the screen firmware my screen just goes blank so i tried to install the firmware without the spritext it goes in fine the only thing i see different is the download folder for the sprite does not have the TJC set file in it so what can i do for that please help
I have an Ender 3 V2 ready to go. I bought a BLTouch but have not installed it yet. Should I update to the firmware w/BLTouch before installing the ABL?
I upgraded my ender 3 pro from the creality cloud site. everything is in chinese now. i have a 4.2.2 board with GD chip...Thoughts???? I was also logged in on my account and I use a MacBook Pro to access.
Loved the video. I have a question as to what to do when you install the firmware on the machine and the display and the screen will not accept the firmware, but now it looks like the older style scrren? Is there a way to reset or install an older verion? I have tried to put it back to v1.0.2, but nothing happens? thanks
Hello Bryan, I am a follower of your channel and I have seen two videos of yours about how to update the firmware of the Ender 3 V2, one is from a year ago, (Jyers UI Awesome New firmware for Ender 3 V2 ) (option 1) and the another one from three or four days ago, (Ender-3 V2 Firmware Update- Current firmware formed Creality) (option 2), I have downloaded everything to proceed to install option 1, and I find on your channel, that you have published how to install option 2. I apologize if it's bothering me to ask, but I have to assume that this option 2 is the official one from Creality and that's the procedure to follow, and option 1 is the unofficial one but it works perfectly with my Ender 3 V2. If so, I would like to thank you for confirming this and if I want to install option 1 (Jyers UI...) should I also carry out the same steps as option 2? Open the machine and verify what type of board it has and also what type microcontroller? Or do I simply follow the procedure that you indicate in the tutorial? If I don't like option 1 and want to install option 2, can I go back and install Creality?. I await your response to make the update. I congratulate you on your channel and the kindness and good vibes that you put in your notes, really. Cordial greetings from Buenos Aires-Argentina. 👍
Just put together a brand new Ender 3 V2 with the Sprite Extruder Pro Kit 300 deg, Motherboard is 4.2.2, uProcessor is the GD. Looking to enable the 300 deg temp with firmware and not seeing "spritext" and GD in the same file name such as "Ender-3 V2-HW-V4.2.2-SW-V1.0.5T-SpritExt-20220714". Am I out of luck or will that file still work for me? Any help would be greatly appreciated.
Super handy and easy to follow instructions. Thanks!
I wish Creality made their firmware release notes more easily available so we can see the changes being made or new features added.
Wow, thank you. I'd watched 4 videos about firmware installation and none of them gave me the confidence to just do it but yours did. It helped that the printer I'm working on is the same as the one you used for the demo but the way you explained it was so helpful. I've turned a ded printer into a fully operational printer again. Thank you.
My symptoms were that it would power up and just buzz with nothing on the screen. I could tell the screen was getting power but it wasn't displaying anything. The owner had mentioned that there might be a firmware problem which he couldn't resolve so after checking the power supply I decided it needed to be flashed. I flashed it and it seems to be back to full working order. Gonna do a test print now, very exited cus I've never used an Ender before. Thanks again.
I can't thank you enough. I was having so many issues with installing the correct firmware I almost gave up. Total lifesaver
Cannot thank you enough, I'm new to 3d printing and right out of the box my printer was stuck on the creality screen, this fixed it, thank you!
Another great video from the Fabio of 3D printing. Educational as always and yes, I did watch all the way to the end.
Would you recommend using the latest Creality over Jyers UI? Are there any features or fixes that you would highlight in this release?
Seconded :)
Comparing them would be a helpful video
Would definitely like to see that as a follow up video. From what I've seen, the new creality firmware offers live retraction setting adjustments which could be a game changer.
I highly recommend mriscoc pro firmware, it's far superior to creality and jyers
You are a life saver. Your instructions were very clear and concise. Saved me a ton of time.
Thanks so much for this video, I have been looking for these clarifications for quite some time! Very quick and clear.
Thank you! my I got my ender from my dad, and the screen wasn't working, and I couldn't find any cracks or damage, so I thought installing the firmware but I wasn't sure how. Thank you so much for this thorough explanation! it brought it back to life yay!
Great! I'm glad this video helped!
A bit late to the table...
Thank you for this video. I always wondered how to upgrade the screen firmware so it can support thumbnails. Now I do. So thank you very much.
Many people think you are just covering old ground, but infact you are helping new guys, or old guys to check that final box on how to.
So here is my check on how to, find the micro SD card slot on the screen.
FYI, I have 2 Ender 3 S1's, and they come with the Ender 3 V2 touch screens
Thank you very much, you brought my Ender3 v2 back to life with your instructions. The only tutorial that brought success so far. Thank you and great video.
Many greetings from North Germany.
Wolfgang
OMG I LEARNED SO MUCH. i had been struggling with the firmware until you saved the day with the chip breakdown. fixed and printing strong after 6 hours of searching and testing and troubleshooting.
Always watch to the end, and always exciting to see a new shirt! Great job Bryan!
Next to the BambuLab is also my Ender 3 V2 which is still in use.
With this great video it was very easy to update the firmware, so this printer does not have to collect dust.
Please continue with these types of videos!!!!!
Good work as always, Thank you very much Mr. Bryan Vines
Helpful, and well presented !! Good work as always !!
Thanks. E3v2 stok 4 месяца. Доволен. Смотрю уже не первое Ваше видео. Спасибо ещё раз, Вы очень правильно, на мой взгляд, рассказали основы и порекомендовали удобную прошивку в ранних видео. У меня интересный факт, деформировалось стекло - ультра база в середине. Использовал лак для волос для адгезии. Придётся теперь из обычного стекла делать пока что. Доброго
WAO!! i fallo step by step all the instructions and in les than 5 minutes all my 2 weeks problem despair. i cannot thank you enough, i will definitely subscribe XD
Thank You So Much
Another great video to help those new to firmware updates! (and another first comment ;)
What are the benefits to updating this firmware?
And is it an upgrade over jyers marlin?!
9 months later in still curious if it's worth it. I have had no problems rubbing on 1.0.4
Wow so helpful this guy is, didn't even comment to let us know 🙄
M600 lol
I just watched the video and realized I had flashed the incorrect GD firmware to my SMT board. With any luck, the original firmware can be restored. I have now upgraded the printer and display. I appreciate your support and the excellent teaching.
Extremely helpful 👍
Good information Brian. One thing, I updated my two Ender 3 V2 printers to Jyers firmware and Jyers display software IAW your video on that. Which is better and which do YOU prefer? Thank you.
Thanks Brian. Great clear instructions and I now have updated firmware and screen. Thank you😊
This video saved my bacon today. You made it super easy to follow-thank you!
Great info Bryan, and very well explained! Thanks
Thanks for the video! Very well explained. Can't get any easier than this 🐱
Every time I have to do something, you're there. It's like you know.
....are you a Jedi?
Love that shirt, my fellow long hair dude!
You are a lifesaver!
Thank you. I just installed a CR Touch and could not figure out why my machine wouldn't update. Finding out the GD means GigaDevice told me I was using the wrong file. It works now. Much appreciated, have an upvote.
appreciate the helpful content!
Very helpful tutorial, thank you!
Great job, thanks for sharing!
but how does the new firmware compare to the Jyers that you recommended a while back?
I was wondering the same thing. I know Jyers is "dead" but compared to what my V2 came with originally I still prefer the Jyers.
I love you man you saved my printer.
Thank you this fixed my printer
As Jyers hasn't seen an update in a long time, is switching to Creality's firmware recommended at this point?
I've got jyers on mine and came to the comments wondering the same.
@@garethrosey mriscoc firmware is the best for the v2 and s1
If you're looking for an updated Jyers version, try using Jyers Enhanced. Someone basically took Jyers firmware and added a bunch of features you can enable, disable, or change on the fly using the printer's display.
@@abo_bandar4375do you have a link to let my Ender 3 V2 print at 300C?
Great walk-through video :-)
you helped me a lot. THANK YOU😍😍
Thanks for the information
Great video and super-duper easy to follow instructions. I have only 1 question: how to choose the right firmware if I get a 4.2.2 mainboard (not GD) and a CRTouch probe?
Great question. Looks like the latest one with probe is 1.1.2
Thank you Sir, you are a life saver.
Best video thank you very much.
Thanks so much for your video! I thought my screen was bricked but you saved my printer! It turns out I installed the firmware for the incorrect type of chip, plus my MB was 4.3.1 which confused me :/. I never thought of looking for the firmware files from creality cloud. I was looking for them in the main creality website and the package there don't have any descriptions.
Thanks so much again!
thanks, you are a master!
If i don't update the screen will change something on the faction of the printer?
My printer have exactly the same mother board and i installed the same firmware like in your printer
If ive already updated to the same firmware you are using, but I wanted to add a BLTouch, which firmware should I use? Also, do I need to reupdate the screen as well? I literally have the same board and printer as youre showing here. 4.2.2 with SM controller. Just adding BLTouch only, no filament sensor or anything.
did you find out, what firmware you should/could use?
Great Video Brian.
very detailed and helpful.
Question.
Does the chip need to stay in the printer or can it be removed and everything still work as it should.?
Great instructions.
Great video walkthrough.
Probably not going back, the Professional firmware from Mr.Isoc is worlds better. They would have to make some huge changes.
Thanks Bryan.
Great video, thanks. I'm also trying to update an Ender3 with a V1.1.4 board. Any idea where I can find the files for that board. I looked on the Creality site but see one. Thanks again.
How does this differ from other 3rd party firmware which has more options and more up to date?
I was sort of surprised that you're going back to Creality firmware after a push for Jyers almost a year ago. Why not Mriscoc since it was essentially built off Jyers work?
Thanks!! I tried installing my sonic pad, and I couldn't get it to communicate with my printer. When I disconnected it, and tried to use the printer without it, it was bricked. Thanks for showing me how to reflash my firmware!!
Thanks from TURKEY
Byran, not too long ago you strongly recommended the Jyers UI firmware as being the best for the Ender series printers, would you please tell me what has changed, I am a little confused !!!
I am currently using JyersUI with BLTouch....does this firmware improve on that or should i just keep my existing one?...Thanks
I don't think Creality's firmware could ever be better than a third partys.
Although, you could upgrade to "Jyers Enhanced", which is basically just a more up to date Jyers firmware with a bunch of extra features you can enable, disable, or change on the fly.
@@ILEFTCAPS0N Thank you i will take a look 👍
Excellent video as always but after watching your Jyers UI video and installing it on my printers, I'm not going back. It's too good.
Thanks!
It should be possible for the board to self report its processor and its board version number and store that in About/Info. but this is Creality we are dealing with.
Bryan do you know what new features/benefits the new firmware has? I realise Creality wont release any meaningful information regarding this, you count yourself lucky if they release the source code.
Bryan I have been meaning to ask, do you print your T-shirts?
THANK YOU! your description of which file to download was the missing link!
I liked the in depth information regarding the chip as I have never been successful with flashing the firmware. Mine has the DB chip and I used that but now there is a high pitched noise from the control board and I have not been able to change it whatsoever. If you have any suggestions, that would be great. Thank you.
Wonder if I need to update. I have GD 4.2.2. without BLTouch. And firmware version 1.0.8 from stock. It's looks fishy on their website because only file for GD 422 without BLTtouch include 2 firmwares versions 1.0.4 & 1.0.5 it seems like downgrade for me (not talking about that 1.0.8 isnt even there) am I tripping?
Thank you Bryan , worked like a charm. One question though, do I have to update the screen firmware?
Thanks! I’m following all the steps, but the printer does not update the firmware, once the card is in and the printer is turned on!? What can be done??
Thanks, you are the only one who explains what is the GD firmware. I almost installed that version in my ender that has the other chip!!
Gracias, sos el único que explica qué es el firmware GD. Casi instalo esa versión en mi ender que tiene el otro chip!!
I made a mistake. I neglected to format the address card before putting the files in. It had some prints on it. Now the printer is forever stuck on the black screen. Is there a way to fix it?
I'd recommend Mriscoc Professional firmware over Creality.
I got the spider hot end but haven’t yet installed it. Would the “sprite” option be of importance since it’s temperature set fall more in tune with the ceramic and all metal hoopla? 🤷🏼♂️
Your video is as usual very succinct.
Mine is still stock firmware 1.0.5.
I have a GD processor on 4.2.2 board and no ABL. As such it seems only one possible firmware option for me.
I wonder what that version is because unfortunately Creality doesn't indicated that in the name.
Is that 1.0.7? Or is it still the same 1.0.5 as what I already have?
can you do it upgrade to 1.0.7 , I follow this video but is stuck on 1.0.5 same, I you can pls tell me
@@gogopai I haven't upgraded yet because it is unclear which FW to use for my board (4.2.2 w/ GD processor).
@@ashokmoghe8035 GD-Ender-3 V2-Marlin2.0.8.2-HW-V4.2.2-SW-V1.0.7_E_N_BLTouch this if bl touch installed
Ender-3 V2_HW-V4.2.2-GD Version firmware
if stock version
Hey , are you going to create a video on how to maximize the firmware or get a jyers type firmware for the Ender 3 V2 NEO
ok mate great channal iv just followed how you up date the firmware all good here BUT when I set the nozzle temp and bed temp then I get a alrm comes on saying nozzle or bed temperature it to low so mate I need help
Is the Creality latest firmware Version preferred over the Jyers Update? Does the Creality version support M600? They seem to never get that right... LOL
Hi i love your videos and i have a Ender 3 that i have swapped a 2.2.7 mainboard and put the sprite pro extruder with a cr touch. i cannot find a firmware that covers all of these, would i have to write my own or what would you suggest? thank you!
Hi. My machine is set up a little different that yours. My machine doesnt have the MicroSD card in the control panel like yours. My mother board says Creality 4.2.2 and the other card is a gigo device. Because my machine doesnt have the MicroSD card in the control panel I inserted the firmware which was the 4th one down for the GD system into the MicroSD Card slot in the front of the system. Now my screen is blue. So I then downloaded the same files that you did and my screen is still blue. It was working prior to trying to update the system watching your video. The only reason I wanted to update is that it would only print if I loaded a Gcode file and not an STL file. I am new at this 3D printing. Any help would be appreciated.
Thanks for a great easy to follow video. My ender3 has a 4.2.2 motherboard with a GD micro controller so the file i downloaded did not include the display firmware update files. Can i use the display update files included with the SW download set or would that cause a compatibility issue?
Great video, well explained. i am a regular resin printer ... just bought an ender 3 v2 ... i have modded some stuff , springs, firmware , magnetic plate ... and i have printed some stuff, some better than others but ... i think i m not liking the times, quality .... maybe i just hit on a wall ... i bought abs from hatchbox ... the thing DOES NOT STICK to the plate ... ive added tape, changed the plate ... but the thing does not work ... and i feel like ... fdm print is a total pain in the "you know" .... could you give me some advice? maybe staying away from abs ... dunno .. hope you keeo doing your great videos. peace!!!
thanks the video help me a lot
Thanks 😎💯🙏
Does the new Version supports Linear Advanced?
The BL-Touch update also included the Creality CR-Touch?
Hey guys! I need a little bit of help. I bought for my E3 V2 an E3 Free-Runs TMC2209 32 bit motherboard and I cannot make the screen connect to the printer. The printer has an CR Touch and a Sprite Extruder. Can any of you please provide me some guidance? The Creality instructions are scarce and are not providing any real guidance. Thank you!
Amazing video, unfortunately my Ender-3 v2 Neo has a 4.2.2 motherboard version with a GigaDevice, combination for which there are no drivers in the Creality store. And I've tried other similar ones but regardless of what I do my display shows the creality logo with the temperature numbers kind of half displayed and realtime updated at the bottom (where they should be) but the menus don't show, it's only the Creality logo. Really pitiful experience. Also a bit ridiculous that standard procedure expected from the customer is to screw open both the motherboard and the display.
hey brian, great video, one concern though, my screen didn't turn red at all, is this something I should be concerned about? thanks!
thanks for the straight forward and clear instruction. way better than creality's
do you know if their new firmware will support cura pause at layer height, I know the stock version I had did not, so I went to MRISCOC, but now upgraded to a Sprite hotend, and need to get the 300C function, but no BLTouch.
I did the exact way he did to format my display and now it is buggy and missing all the normal blue color. Any suggestions would be greatly appreciated. thanks
Are you going to do the new ender 3 version 3 SE? That would be awesome man by the way I love your videos
Bricked ender 3 v2 board.... so...I messed up...how do i get a boot load on it??
i know this is a older video but i just was given a ender3 v2 with a sprite hot end and i downloaded the file with spritext in it and when installing the screen firmware my screen just goes blank so i tried to install the firmware without the spritext it goes in fine the only thing i see different is the download folder for the sprite does not have the TJC set file in it so what can i do for that please help
I have an Ender 3 V2 ready to go. I bought a BLTouch but have not installed it yet. Should I update to the firmware w/BLTouch before installing the ABL?
I have downloaded the .bin for the mainboard but it doesn't execute when the system boot up.
I have an Ender 3 V2 stock.
Does it really make changes with the printer itself as far as printing goes ?
I upgraded my ender 3 pro from the creality cloud site. everything is in chinese now. i have a 4.2.2 board with GD chip...Thoughts???? I was also logged in on my account and I use a MacBook Pro to access.
A question Bryan, What firmware are you running on Enders now?
Loved the video. I have a question as to what to do when you install the firmware on the machine and the display and the screen will not accept the firmware, but now it looks like the older style scrren? Is there a way to reset or install an older verion? I have tried to put it back to v1.0.2, but nothing happens?
thanks
Should be able to load stock firmware and try again. If nothing will load use a new micro sd card... Its a common fix. Good luck
What's the benefit of this new firmware?
Hello Bryan, I am a follower of your channel and I have seen two videos of yours about how to update the firmware of the Ender 3 V2, one is from a year ago, (Jyers UI Awesome New firmware for Ender 3 V2 ) (option 1) and the another one from three or four days ago, (Ender-3 V2 Firmware Update- Current firmware formed Creality) (option 2), I have downloaded everything to proceed to install option 1, and I find on your channel, that you have published how to install option 2. I apologize if it's bothering me to ask, but I have to assume that this option 2 is the official one from Creality and that's the procedure to follow, and option 1 is the unofficial one but it works perfectly with my Ender 3 V2. If so, I would like to thank you for confirming this and if I want to install option 1 (Jyers UI...) should I also carry out the same steps as option 2? Open the machine and verify what type of board it has and also what type microcontroller? Or do I simply follow the procedure that you indicate in the tutorial? If I don't like option 1 and want to install option 2, can I go back and install Creality?. I await your response to make the update. I congratulate you on your channel and the kindness and good vibes that you put in your notes, really. Cordial greetings from Buenos Aires-Argentina. 👍
This is great. I keep getting a file interrupted on about 75% of prints and then the resume never lines up correctly on the x,y,or z axis. Any ideas?
Just put together a brand new Ender 3 V2 with the Sprite Extruder Pro Kit 300 deg, Motherboard is 4.2.2, uProcessor is the GD. Looking to enable the 300 deg temp with firmware and not seeing "spritext" and GD in the same file name such as "Ender-3 V2-HW-V4.2.2-SW-V1.0.5T-SpritExt-20220714". Am I out of luck or will that file still work for me? Any help would be greatly appreciated.