This was one of the best car diy videos I have seen. No blind spots, clear directions and not a lot of fluff. Thanks. This worked great on my Jeep door alignment
This video never get old. I just recently got a car and has this same issue. I don't know how to fix it until I saw the video made it so clear and very intuitive to use a nice piece of wood to evenly get the door up. I didn't even know that the boots at the hinge could be adjusted vertically, because from appearance the hinges don't appear to have any vertical adjustment, but this video shows it can be done. So I going to now have a confidence to fix this damn door. Mine is worse, at almost a half inch low. I have to slam the damn door, and the wind leaks in because the door is off in my scenario. So this is great video no matter how old it is. Thanks!!!
Is this only for vertical adjustment? Because my door vertically correct, but i need horizontal as the gap between my driver door and rear passenger is 1mm larger than left side doors.... In summer the door rubs against the fender making a irritating noise.... I want to adjust horizontal to close the gap a bit between the 2 doors
This was one of the best car diy videos I have seen. No blind spots, clear directions and not a lot of fluff. Thanks. This worked great on my Jeep door alignment
This video never get old. I just recently got a car and has this same issue. I don't know how to fix it until I saw the video made it so clear and very intuitive to use a nice piece of wood to evenly get the door up. I didn't even know that the boots at the hinge could be adjusted vertically, because from appearance the hinges don't appear to have any vertical adjustment, but this video shows it can be done. So I going to now have a confidence to fix this damn door. Mine is worse, at almost a half inch low. I have to slam the damn door, and the wind leaks in because the door is off in my scenario. So this is great video no matter how old it is. Thanks!!!
thx man after wasting 4 hours unscrewring the wrong screw i found your vid and really helped me a lot to fix da damn door xD
Clever way of doing it good job
1:01 damn that’s actually smart lol I’m going to start doing that 😂
Thankyou! I was wondering how to do this on an audi. Please put in description audi so others can find this video easier 👍
Thanks for the advice!
That way you only adjust door in and out only. To adjust it up/down you need to remove panels insider and loosen nuts , lift door and tighten nuts.
Is this only for vertical adjustment? Because my door vertically correct, but i need horizontal as the gap between my driver door and rear passenger is 1mm larger than left side doors.... In summer the door rubs against the fender making a irritating noise.... I want to adjust horizontal to close the gap a bit between the 2 doors
Hey. By undoing those bolts, you can adjust the doors both ways.
what M is this XZN ? thank you
It’s the same work to do also for a Peugeot 207 cc from 2009?
Smart woman!! She kicked my ass! Thanks lady!! 😊😊☮️☮️. Very well explained!!
Will give that a try! Thanks!
Hope it'll help!
What size tool did you use for the nuts , how is it called ? Thank you
Different cars have different bolts. You have to check yours
Very helpful had to guess the size of the bolt though lol I figured it out
It's kind of a tutorial for most of the cars, so bolts may differ :D
@@xozart9785 we should never assume vag is consistent with bolts you right you right
Awesome tip
Thx. Fantastic
thnaks for help
Thanks for help
You are welcome!
What about if it has to come down?
did this, now the door wont shut and a door hing bolt has sheered off.
SUPER
👍👍👍thank you
That’s what she said 😂
Thnx
Np
after replacing the lock / lach the door shut's properly without a hich i tired to adjust it but no luck
maybe door hinge itself is bent and need to be replaced 🤔i have the same problem
@@lemesis3467 i replaced the door lach and problem is gone
We can be st it
I thought a Lady is doing this tutorial ... ha ha