How to Change Spark Plugs Ignition Coils on 2013 Nissan Murano SL AWD 3.5 V6 Tune Up
HTML-код
- Опубликовано: 7 сен 2024
- Front plugs and coils are not that bad but the rear ones is what this video is for..take your time remember your steps and everything you unplugged or removed and put them back..it will set you back on some time..relax and Enjoy...S7E336
PS, I've been told I forgot to mention the 6 bolts holding down the intake plenum in order for it to be removed but clearly its right there in front of you and you can't miss them.
Got old oil stains on your Cement..
• How to Clean Old Dried...
Visit my store for Cool Merchandise
teespring.com/...
The best most detailed video I’ve seen in a longtime! You did a great job sir! Thank you for your time.
Thank you for taking the time to watch it.
You are a Legend! Just saved 900 in labour, did in 5 hours, music n coffee!
900.00 oh my...thanks for picking my video to watch...
I looked at about 5-6 videos before settling on this one. It was great, good lighting, very accurate, no moronic music, the explanation was clear and to the point, and we didn't take the unnecessary scenic route. Other videos require you to take too much finnicky stuff off. I found that my "hidden screw" at the back was a 12mm (not 13). I only realized this when I had difficulty putting it back in.
I got two quotes before tackling it. You save me about $360 at the local garage and about $450 at the dealership ($160 per hour). If you were closer I would buy you a beer, or two or three.
Liked the N.Y. directness, refreshing!
You saved the Best for Last , thanks for the compliments and as for a beer 🍺 Cheers..
Simplicity wins by a landslide. Concise, effective, and not a waste of my time. You are a damned lifesaver, sir. I watched what felt like 30 other videos, ended up in my garage, STILL, 4 hours later with only the front three changed. Wish I had just watched this one the first time. I'll be done in 30 mins now. Another guy had me taking off WAY too many parts.
Many thanks!
You're welcome and thanks for the compliments and thanks for watching too...
The best video on the subject. Simple, factual, no nonsense and to the point. I didn’t need to see you work, just the process. You have my sincere thanks!
Thanks for the compliments. And thanks for watching too...
Man, what a great video. I inherited my Pops 2012 Murano a few years ago, and it's time to change plugs now that it's at 98k miles. Thank brother. God bless
You're Welcome..Thanks for Watching...
This is the best step-by-step 'how to" spark plug replacement video I've seen on RUclips.
Good Job!
Thank you and Thanks for watching
A year later I’m coming back to this video. Yours is literally the best video on RUclips on how to do this very well detailed my friend. Thank you so much and straight to the point.
Thanks for the Compliments..You waited a Year?
Lol I watched it the first time a year ago made $400 a year later had to watch it again to get a refresher made me another $400 simply changing spark plugs
@@memenation159 thats a good price and the customer saved even more..thanks for watching it again...😆
@@alyoungcuda I thought it was fair. I charged him 400 for my labor. With the parts it came out to be $528 which isnt bad at all. He was quoted from Nissan $972 and honestly it only took me an hour to do the whole job.
@@memenation159 it looks scary to do at 1st but it gets easier and thats about my price for the labor too and its a good days pay to pay the bills..lol
Thank you sir, just did my 2012 Murano, with your help, and I'm no mechanic, just took my time.
Thanks again!
Good job..did it take long for a 1st timer?
@@alyoungcuda it took me about 3 hours!
I think the only thing you didn't mention was the 4 screws on top of the manifold and the two nuts on the side if I'm not mistaken, but I figured it out!
Thanks again I like to learn things and you made me save money 😉
Yes I forgot the main intake bolts..😆 3 hours is good..I believe dealers take 6 hours to get paid for that at like $125.00 an hour
Best run down video so far it only took 30 minutes to do everything
Good time..took me longer to film it..😆
By far the best tutorial on how to do this job. Thank You so much for taking the time to help us. It made the job much easier for me.
Thanks for the compliments and thanks for watching too...im glad it worked out for you...
Fantastic video. Saved me more than $500. Thanks for taking the time to make & post!!
2 things I didn't see mentioned .... there are 4 each 10 mm bolts in the center of the manifold & 2 each 10 mm nuts on the right & left front corners of the manifold that all need to come out. If you don't remove these the manifold will not come off. Good idea to replace PCV valve when you get the manifold off. Access is easy.
I know, I forgot about those, but I left it out for you to find out..😆
@@alyoungcuda Damn .. I'm such an amateur, I thought I had missed something!!
This is by far the best easiest technical video I have viewed hands down. Great job I fully endorse this disassembly application. Now show the viewers how to replace the power steering unit. I highly recommend replacement of the coils, old coils on new plugs are nbot a good idea because the coils build resistance, and the back ones your not going to want to do this all over again if one goes in back a day later.
I agree with the new coil changes in the rear..cause you know you're not going to change out the plugs for another 75 to 100,000 miles later..and Thank you for the Compliment and Thanks for Watching..
@@alyoungcuda I recommend testing the rear coils, using an ohm meter, if the ohms are low resistance, they're good, if high resistance, by all means, swap em. Thanks for posting this video, very detailed. I am a former Nissan / Honda tech
Yo, I love your step by step detail explanation. You make it look easier than other vids. I'm trying to do it on a pathfinder but vids for those are scary 😅.
I'm glad you find mine, you saved the Best for Last...😆 and thanks for watching too...
Just bought a 2013 Murano and this video was my first and ONLY reference I need to get to the back bank of plugs. Not only informative and clear, it was entertaining. I had to rewind and rewatch one segment about 6 times. Regarding one of the vacuum hoses on the firewall. He sez "don't forget to reattach this hose or it'll run like CRAP. I dunno, the bluntness, the un-sugar coating, the ACCENT. Makes me wish I was working on cars with him in the neighborhood. Loved it. And, THANKS. I'll have the plugs swapped out by Tuesday.
Yes, you watched the Best one and thanks for the compliments and thanks for watching too...
OMG, thank you for pre-removing the bolts!! other videos with similar content were 20-40 minutes LOL
I know what you mean, in 1 video of mine the guy said I didn't show myself removing the bolts...You don't want to know what I said to him...😆 who needs to see a Ratchet spinning over and over again even if they put it on high speed, its friggin boring.
Now I see why the wife loves her pathfinder it's as complicated as she is when it needs something
Ha ha..😊 thanks for watching..
Thank you, thank you, thank you; I watched like 4 videos that said I had to take a lot more out, you made this so easy for me, you just saved me $600 easy
You're welcome and thanks for watching too...
Thank you for showing and reminding me that mecanics need to eat also.
For sure
Great video! Followed it step by step and no issues on startup. Thanks man!
That's Great to hear..and Thanks for watching too...
Best video. Straight to the point. Clear directions. Awesome. Much thanks
Thanks for the compliments and thanks for watching too...
Thanks for the compliments and thanks for watching too...
Thanks for the well detailed Video, I found my vacuum leak while I was doing the plugs/coils. TB bypass was Easy & all new gaskets. Took 3 hours after 3 days of planning. Love it when a Plan comes together. Ty.
Good job and thanks for watching...
Thank you for taking the time to record and share this. What a major pain in the ass for spark plugs. Helping a friend change theirs. I will never own one of these cars. The engineering is ridiculous.
Nissan are good cars..bad transmissions and the windshields seem to crack all by themselves...and thanks for watching...
I got all the peripherals off, and realized that you had the main bolts removed before the video starts - and never mentioned them 🙁. So now off to find a video about that.
There's only 6 bolts holding it down..if you need to look that up, you might be in over your head on this job..but becareful
Absolutely the best, detailed and easy to follow tutorial! Thanks so much! Much appreciated! 🔥🔥🔥
Thanks for the compliments and for watching...
Best detailed and to the point video!
Thanks for the compliments and thanks for watching too...
Thanks, I've been putting off this job on my 2014 because of all you have to take off. This will help me a lot!
It looks intimidating but you got it..
super helpful thanks! I have a 2011 murano with what looks like same engine configuration that i'm planning preventative maintenance since it's a gifted vehicle and I have to assume no maintenance was performed.
Better safe than sorry..for the price of over $800.00 if not more to do this job at a shop, most people would not do it till it starts to run like crap..
Awesome video, im a mechanic & with this video had it off in a 1/2 hour
That's fast..Thanks for watching...
Great Job with this video. Thank you for posting it! I used it to change my spark plugs and ignition coils. I did not want to go back in. The hardest part of the entire project was the freakin' 13mm bolt on back of the collector. :-) Touch to get to with big hands.
I know right on that 13mm bolt..thanks for the compliments and thanks for watching...
I used this video to change the spark plugs in my nissan maxima 2011 SV, the vids for the 7th gen maxima show people taking way too many hoses off, this guy breaks it down for the common man like myself. I thought he sounds like Gov Andrew Cuomo. Beware the 13mm in the back.....thanks Al!
It's My Brooklyn Accent..😆 Thanks for Watching
Best and calmest video on this! Thanks
Thanks for saving the best for last and thanks for watching too...
man man man this is the best of the best video wow u made changing the spark plug and coils for bank one super easy ,,, thank you a lot u r the best
Thanks for the compliments and thanks for watching too...
Great job on the video! I am a master diesel tech for Ford. People always ask me to help them with repairs and I dont mind at all. Sometimes I feel like I have bitten off more than I can chew. thats when I do You Tube research..lol I have seen a few videos that are just aweful ! Yours is awesome ! Thanks for the help !!
Thanks, and Yes I have seen some bad ones out there..thats what started me on this journey..you should do it as a diesel tech..
@@alyoungcuda I had never really thought about it. That's a good idea !
Do it Ken, correct all that is wrong out there..
Well done .excellent. short but sweet cause you left out the un necessary crap thank you.
Thank you, I left out all the fluff that everyone else adds in..
great video. Makes the process logical and concise.
Thank you for the compliments and thanks for watching too...
The best how to video I’ve come across. Thanks.
Thanks for the compliments
Can say he did a wonderful job with this video, Was able to get the job done and save me some money.
Glad it worked out for you, and you didn't run into any problems which is good..attention to detail is what it's all about.
Thank you sir this video gave me the confidence to do the work myself
Take your time and you will be fine 🙂
Thank you for your detailed video. I did the spark plug change this afternoon and used your video as reference.
That's Awesome, thanks for watching...
Thank you for your detailed instructions. I feel comfortable doing the spark plug change.
Good luck and take your time, let me know how it worked out for you..
We replaced the spark plugs today following your video. It took us less then 2 hours. Thank you for making this detailed video.
@@El-Sauz 2 hours is good time..thanks for watching too...
Very detailed and to the point! Thank you!
Thanks for watching...
Helped a lot for wifeys Altima coupé
I'm glad it helped you out and thanks for watching...
Best vq intake manifold move away video!
Thank you
Thank you for making this. Just save me some broken plastics.
Plastics? Oh from things that don't need to be removed..lol
Man many many thanks to you on your fantastic job illustrating this pain in butt job I can’t thank you enough
Thanks for watching...
Best video i have seen, thank you so much
Thanks for the compliments and thanks for watching...
Thanks for the video. Saved my mom some labor fees
Thanks for watching...
I just can't understand why they didn't put the engine straight, I fixed miner in a easier way, trade it in before 100k miles ..worked like a charm.
Great video thank you so much made the change a snap thanks again
Thanks for watching...
thumbs up friend... great info.. I will try and attack this... like how detail you are.. .down to the bolt size lol and where to pay attention to.. :D
Thanks for the compliments and thanks for watching too..good luck on yours
Thank you for this amazing video!!!!!
You're welcome and thanks for watching...
Great detailed video on doing this project!
Thanks for the compliments and thanks for watching...
Two days later after my plug change, air filter and tbody cleanout, the idle speed is way high ~1400 RPM more than likely from too much airflow after cleaning out all the gunk in the tbody and intake manifold...it's throwing a P0507 service engine soon light. Need to do the idle relearn procedure and get an OBD2 scanner to reset the yellow light!
Never heard of that..you're the 1st
You are a true master my friend. You inspired me to do this this weekend!
Thanks for watching...you will be just fine..just remember what you removed
Thanks for the video, very helpful knowing what to expect! Woe to ye who drops an allen wrench taking the throttle body off.
Thanks for Watching...
Thank you ..owe you a cold beer!!!!
Awesome..thanks for watching too...
Best video ever rock on brother THANK YOU 🤙🏾
Thanks for Watching...
This was a pain in the ass man. Female owned car too 😂 Thank You ❤🎉
Now you know why they get so much money to do this job..I guess it went kinda smooth for ya?
Great and well detailed video.Should it be the same for the murano 3rd gen?
Of its the same engine, mostly everything is the same
Nice job and excellent video! Do you happen to know the torque setting for the intake plenum nuts and bolts? The ones that hold the plenum to the top of the engine. Thanks!!!
Between 12-14 lbs
Well done! Thank you
Thanks for watching...
Thank you so much great video, you explain very well.
Thanks for watching...
Great job; you didnt show or explain how many bolts come off that hold the manifold down; I can tell they were already off when you recorded the video; is it just the ones you see on the front side of the manifold?
Yes, I forgot to mention the 4 bolts in the center of the intake manifold and the 2 nuts ,1 on each end of the intake that explains the 2 studs sticking up on the ends. Doing it for the 1st time and recording it is definitely not a simple task with no editing...Thanks for the compliments and thanks for watching too, good luck on yours and take your time..at least you won't have a camera in your hand..😆
Thank you sir 👍
You're welcome and thanks for watching too...
awesome outstanding thanks
Thank you and thanks for watching too...
Good job
Thanks for watching...
I miss my 1971 Chevy. So simple to work on. Could change the sparkplugs in 5 minutes.
You need an old car again..😆
Thank you!
You're welcome, thanks for watching...
Hello Al, all done omg it runs good no shaken. I cleared the code but another code came up PO507. The idle rpm is a little high. Can you help me
Double check your vacuum hoses, they might be sucking in air..did you clean the throttle plate while you were there...check also the intake hose for cracks and clamps are tight..its clearly something you removed because I'm assuming you didn't have that code before.
Genius!
Thank you and thanks for watching too...
You are the man! Thank you!
Thanks for watching...
The 13mm hidden "Harness bolt from hell" on the back of the manifold would not tighten. I believe that it had been removed before and stripped. Anyone else had this problem?
As long as the bolt is in there, I wouldn't worry about it, it should be stable..if you want to, you can wire tie it to something nearby.
Some tune up kits comes with throttle body gasket
Who sells a tune up kit?..I always see things sold separately
@@alyoungcuda maybe just a dealership not sure if it was oem or value advantage brand leaning more towards an oem kit
Great video, thank you!
Thanks for watching...
Great video... I have some oil in plug cylinder 2. Are you in California? 2019 murano.. 53k miles
No, on the opposite coast, seems like you have a leaking o ring seal. Its part of a valve cover gasket set.
Outstanding!
Thank you and Thanks for Watching
I did everything you said. Right now engine cranking but not start
Go back and see what you left off..sounds like a wire or connection you took off..start from the beginning in your head in the order you removed things
Thank you brother best wishes
Thanks for Watching
I don't have a torque wrench that goes below 10ft-lb. I believe the intake manifold bolts require 8ft-lb. Is there a way to hand tighten approximately to 8ft-lb? Or would you recommend I buy a specific torque wrench for this?
You can use German specs GoodnTight..lol... as long as you tighten them down evenly, nice and tight is just fine..
Nice explanation. Can you tell me cylinder number 1 to 6 where they are?
When looking at the engine from the front..the cylinder in the front by the radiator is #2 on the left meaning passenger side then #4,#6
In the back is #1 opposite #2 then goes #3,#5. So #5 is on the drivers side by the windshield..
Is it possible to do this without removing the throttle body? I’m having difficulty with the two bottom allen screws.
You can, you just need to remove the 2 rubber hoses and the connector for the throttle plate but remember there is a bracket on the bottom Allen bolt, so you might need to disconnect everything that is attached to that..good luck, I'm sure it can be done, these things happen when working on cars..
Thanks so much! I have to also echo what others here have said. I’ve never had a better explanation in any video. You are a treasure good sir! Merry Christmas to you and your family!
@@manitoulinman Oh Thank you and Thanks for watching too and Merry Christmas to you and your family
What are the torque specs for the spark plugs on the Pathfinder 2013?
14-22 ft lbs
While you were that far in did you replace the PCV valve?
No I didn't replace it..but yes you can clean it and reinstall it back on too...
You got me on this one..there is No Pcv Valve..
You neglected the manifold bolts, I had to go to another video for that. Otherwise it was a great video.
Darn it
Very nice. Thanks for the info, I need to do mine. Best wishes & Blessings. Keith Noneya
Its not complicated..it just looks it..but do remember everything you removed so you put it back on
@@alyoungcuda Thanks AL, I do a YT channel too and I post all my vehicle maintenance videos as well. Only I have a habit of rambling on about any tips etc. So this video would probably be about an hour long on my channel. I do torque specs, shots of the factory or services manuals, chemicals used, list of tools, part numbers, cost etc, etc. The average back yard mechanic like myself love video's that get to the point, like yours. I gear mine towards the novice who knows little to nothing about vehicle maintenance and tool use. That's one of the reasons why they take so long. Yours just popped up in the search while doing research to do the job and I liked it. So I thought it right to give you a thumbs up and a good comment. I have a few in edit mode right now, CV axles, Front Rotors and Brake Pads, Front Wheel Hub Bearings etc. Again fine job. Best Wishes & Blessings on your channel. Keith Noneya
Post your channel and I will follow you
@@keithnoneya I got you..
@@alyoungcuda Same to you AL!
Hi, I just changed the spark plugs and coil, but when I start the car, the car loses power and turns off, what do you think it could be?
Sounds like you left something off or didn't connect something back..look over everything you moved or unclamped out of the way..you replaced the plenum gasket right?..reconnected all the hoses?
Great video. What tools did you need?
Basic metric ratchet and socket set..screwdrivers,spark plug socket..alot of patience for a 1st timer..and a good memory of what you took off and where you took it from..Good Luck and Thanks for Watching...
8:06 how many 10mm nuts/bolts to remove in order to remove the intake manifold assembly? Just the four bolts and two nuts?
Yes and that pain in the butt one in the rear.
Yes and that pain in the butt one in the rear.
@@alyoungcuda yes that 13mm in the back...i found that NOT that hard to remove and install - the trick I used was using both my hands - one hand to hold the bolt in place and the other hand with a 13mm short ratchet. The problem I had was the removing the vertical hose to the side - the clamp had the prongs faced the other way. It was easier for me to reinstall the manifold AFTER connecting this hose. THANKS so much for your DIY video! I saw a handful of these videos on youtube before waiting 140,549 original miles on my 2009 Murano (don't judge haha) to change the plugs and coil packs...and I found your video the best! There was so much gunk built up on the inside of the throttle body, plenum and inlets. After I changed the plugs and cleaned out the gunk as much as possible - my SUV runs much smoother! The only extra part I had to buy was a new 7/64" vacuum hose for the front which was badly dry rotted.
@@jonbe9 awesome..and at over 4.00 a gallon for gasoline, a tune up helps..glad it worked out for you..Tanks for the Compliments...
Please add a comment that the throttle needs to get a body relearn after cleaning
The throttle plate is mechanical and electrical with the car in the off position and it doesn't know if it was removed or cleaned or left dirty, why would it need to re learn itself ?
Would this be the same for a 2013 Nissan Pathfinder platinum??
Same engine then yes
@@alyoungcuda thank you
My friend, I hear a hissing sound like a vacuum leak after I changed the spark plugs. I changed also the gasket and it looks sitting perfectly, but still has that hissing sound. Please help/advise.
Double check your work, especially the hoses
@@alyoungcuda I checked everything, all hoses in place. I noticed the rpm is a little higher than before I changed plugs.
@@laytheshuwaili2455 thats a sign its sucking in air..go buy a can of carburetor cleaner and shoot some around the areas with the straw and see when the engine revs up, it will rev up because of the extra fuel...that is where the leak is
@@alyoungcuda the hissing sounds comes from the area where the manifold gasket is. I have put in a new one, I also opened the manifold again, and saw the gasket is in its place. I will buy the cleaner and spray. I will let you know. Thanks sir so much. Your video is excellent.
@@alyoungcuda hey man, the car rev up after I sprayed around the gasket/manifold. I replaced the gasket again but the same thing. Still has the hissing sound. Not sure what else could be .
Does this works for Pathfinder 2013 too?
If its the same engine yes..sometimes there might be something else in the way of brackets and stuff but the basics is the same.
🎯🎯🎯🎯😎😎😎 accurate
Thanks for watching...
Do you have to reset the idle speed
No..nothing is adjusted
should this work for a 2012 murano
If its the same size engine, then yes
thank you so Much! I think the person working my murano put the wrong size spark plugs in, am checking them on Amazon and they say it's not a fit. Your video literally saved me from this mechanic messing with the engine. Your video has truly saved me from a major headache 🙂
@@LoveTrinity03 if you have the spark plug number that the guy put in, you can check on autozone.com under your car and engine to see if its one of the many ones they sell to see if its correct
Man you are a hero.. just checked and yes they are a match and they are good quality spark plugs 🙂 I would be absolutely lost if I didn't come across this video, thank God for RUclips and helpful videos like Yours! 🙏😊
@@LoveTrinity03 thanks for watching...
you have this Italian accent lol are you from NY...
You caught me..
damn
Looks complicated but its not that bad if you take your time...
Great video, thanks!
You welcome