Seeing cool pilots like you diving buildings is what got me into the hobby so this tutorial will come in handy. Keep up the good content Drew. Big hug from Portugal
This was great , the noob section applauds and thanks you. No such thing as a perfectly harmless tree. I’ve been on three ladders in the last year to try to floss out a drone eating tree. A stick cam would be helpful but your narration is so helpful
Diving has always had the wow factor for me, but what really impress me is the “hang time” you can get from a low building... you can make it look like slow motion! THAT IS TRUE SKILL.... the way you can almost put the quad in reverse blow my mind.... I try being at the apex at idle/air mode but still I’m going towards the HARD STUFF at lightning speed!
That's a solder sucker. They work awesome for pulling the bridged solder between board pin holes. Try it. Wet the solder put that tip close and press that button. Works good on bee strings to for sucking that venom out before you stab the epinephrine in that thigh! 👍🏼😉
HighQuad: yeah! It's not a perfect fix but if you put it on there in under 2 min it will drastically reduce the swelling and healing time. 😊 sucks out the venom and a few white blood cells at the same time. 👍🏼. They actually make larger versions specifically for snake bites.
I like your term "building dive", more fitting than rotor riots "freestyle trick". Dive is a verb that puts the craft's characteristics to the test. And you are an action adventurer. Freestyle is a adj and a noun, which are just there not acting.
Hi Drew, this was an amazing tutorial, your explanations were clear, detailed and precise! I like how you build the audience up for the execution of your dive! I really appreciate your respect for the FPV community with your explanations on what to look for when looking for a place to fly. Your Editing is top notch, keep up with the amazing content!
Hey drew I loved the video. Great dive demo too! Just an FYI that silver and blue tube is a solder sucker, you push the plunger down on the device - heat up your extra solder or solder joint - get the plastic nozzle close to the liquid solder(preferably while the iron is still on the joint) - push the button on the side of the device and it should pop to vacuum the extra solder into the tube to trash later. Keep up the awesome vids man and thanks for all you do!
It is a solder sucker they work great. Took me awhile to get used to your style but this tutorial was really well explained I have not tried a building dive yet because I did not know the mechanics of the trick great explanation thanks drew I will start low and build up. One more thing your vids are always so much better when Ashley makes an appearance. Keep em comin
So jealous! I ran out of CW props today! I dont know how that happens. Now I have to wait. DREW ...I need help with antenna management. My zip tie shrink wrap receiver wires take a beating.
Thank you very much for this nice tutorial, Drew. The going-over-the-roof part is really scary, but looks so cool. Also, when you were explaining with the quad in your hand I suddenly heard: "Spider drone... spider drone...." singing in my head. ;D
The blue thing is a de-soldering vac thingy, what you do is you push the plunger all the way down, heat up the solder you want to remove, hold the tip to the solder, push black button to release plunger, suction carries it way.
Thanks for the great video. Would there be a chance you could do a tutorial on a regular split s? I am working on them at the moment but would be great to know how to get them nice and smooth. Keep up the epic work on the vlog
Okay, the smooth dives are a favorite but, I really want to see one of you crazy pilots go for a huge dive without pulling away from the building and bringing the drone to a nice gentle bit fast landing. It would be so crazy to see a smooth stop right at the very base of the building. Love these older vids Drib. I revisit them often. Cheers
Sure, day old video, see how you are... Good tutorial - perfect timing for me. been sim diving, and can't seem to get in tight. Great explanation, you make it seem so much simpler than it feels if you just have at it. My brain isn't used to staying nose down, so I have no feel once I pitch in. Your explanation helps a lot. You do great tutorials - I'm always glad when you upload one, even if it's not fresh... Enjoy your new solder sucker - got the quad box myself - I've been getting it for 4 months, and it's always been worth the 50bucks, but some of the tools are a tad on the cheap side. Minor point, I recommend it to anybody that flies much. Love the shirts & I've got lots of new props to try in the spring... Not many bandos around here, especially diveable ones, but I'll find something to crash around... Thanks for a great tutorial.
freaking love building dives :P my first was the UP headquarters hehehe :D ...just wish I had more opportunities to do them but rural living means there aren't many buildings to dive. Great tutorial! 12:20 lmao
Great video :) Suggestion; can you fix the focus on your camera? I don't know if you realise, though you're constantly going in / out of focus as the lens adjusts.
Hey Drew, I hope I can help for once: Its old as fuck, but at 12:30, if nobody told you yet, that thing is used to remove soldered metal. Like it sucks the molten solder away, when you push the release button.
that solder sucker is the same one i use to have ,it is absolutly crap .throw it away ,soon as you press the button it dismantles its self into pieces lol
1:14 DREW LOOK OUT THERE'S A SNIPER WITH A BLUE LASER SIGHT POINTED AT THE BACK OF YOUR HEAD The office portion of the video was especially snappy and humorous. You must have been in one heck of a good mood. :)
6:36 Looked sloppy? That looked freaking cool. I havent seen (not saying it doesn't exist) anyone dive a building upside down with rthr camera facing the video. Tgat would be awesome, especially with a late pullout. Sounds like something Cricket would do.
out of interest.. i haved an x140 type drone... its kinda zippy... would you suggest zero prop spin at zero throttle ... or to leave a little spin to add control.. its contentious i know.. i just wanna know for me :p cos im ive just started learning to properly acro/rates
I am just starting to fly FPV without making dumb mistakes.. I have to learn how you got started the split s into the dive like that.. I can power loop in open air, no obstacles lol And split s (kinda) in open air, no obstacles And that’s it!! LMAO. No other tricks yet.. But I am putting in the time and effort to be successful... You make it look so F****ng easy!!
Thanks for making this video. Asked stingy once and he came up with some self righteous comment that he didn't want to teach anyone how because he didn't want people trying it. I did it anyway, but it would've helped to get some guidance.
Ooh I want one of these propwash t-shirts! 12:30, come on, that's a desoldering pump, very useful indeed. 2:00 cue in a 9/11 video (sorry, downvote me)
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Seeing cool pilots like you diving buildings is what got me into the hobby so this tutorial will come in handy. Keep up the good content Drew. Big hug from Portugal
This was great , the noob section applauds and thanks you. No such thing as a perfectly harmless tree. I’ve been on three ladders in the last year to try to floss out a drone eating tree. A stick cam would be helpful but your narration is so helpful
Thanks Drew. Your building surfing is probably my favorite move that you do.
Diving has always had the wow factor for me, but what really impress me is the “hang time” you can get from a low building... you can make it look like slow motion! THAT IS TRUE SKILL.... the way you can almost put the quad in reverse blow my mind.... I try being at the apex at idle/air mode but still I’m going towards the HARD STUFF at lightning speed!
Thank you for the awesome tutorial! We do not have any empty building here to learn on. We do have a few quarries that might be fun to learn in.
Great teaching Drew!
Interestingly enough, I was just on my way to dive a building! Thanks! 🙂 And I'm fairly certain that was a solder sucker. 12:19
"Glass has to be cleaned anyways, so..." LMAO!! Le drib, you're hilarious. In a good way, I mean.
Drew, you make the best vlogs/vids whatever hands down! What a talent! Such editing skills and you tell a great story. Keep entertaining us!
You are the best of the best at showing this kind of moves for us -- thank you so much -- keep up the great work
Perfect building dives is what I've been working on lately
That's a solder sucker. They work awesome for pulling the bridged solder between board pin holes.
Try it. Wet the solder put that tip close and press that button. Works good on bee strings to for sucking that venom out before you stab the epinephrine in that thigh! 👍🏼😉
Ol-Man-Duffy J Wtf? Does it really work for bee stings?
HighQuad: yeah! It's not a perfect fix but if you put it on there in under 2 min it will drastically reduce the swelling and healing time. 😊 sucks out the venom and a few white blood cells at the same time. 👍🏼. They actually make larger versions specifically for snake bites.
Ol-Man-Duffy J Thats cool! I will try this on my next bee sting (if I have a soldersucker nearby).
I like your term "building dive", more fitting than rotor riots "freestyle trick". Dive is a verb that puts the craft's characteristics to the test. And you are an action adventurer. Freestyle is a adj and a noun, which are just there not acting.
Wow... unreal flying
Yeah i haven't tried this either but man it looks fun great post!!
Great dives lol.
👍👍
I love diving buildings! Too fun. Great vid drew
Hi Drew, this was an amazing tutorial, your explanations were clear, detailed and precise! I like how you build the audience up for the execution of your dive! I really appreciate your respect for the FPV community with your explanations on what to look for when looking for a place to fly. Your Editing is top notch, keep up with the amazing content!
Hey drew I loved the video. Great dive demo too! Just an FYI that silver and blue tube is a solder sucker, you push the plunger down on the device - heat up your extra solder or solder joint - get the plastic nozzle close to the liquid solder(preferably while the iron is still on the joint) - push the button on the side of the device and it should pop to vacuum the extra solder into the tube to trash later. Keep up the awesome vids man and thanks for all you do!
You're holding out on us Drew, you know we all want to dive buildings!
Thank you for the tutorial. You always make it easy to understand
I knew our snow went some where... rare break for us plus 14 ;) n sun.... sorry you got it brother.... gone for good soon.... sweet video as always
Thanks Drew... You make it look too easy!
I LIKE YOUR VLOGS LEBRIB THIS ONE CAME OUT TE DAYH AFTER MY BRTHDAY SO ITWAS LIKE A COOL LATE BIRTHDAY PRESENT
Great explanation of an intimidating trick!
It is a solder sucker they work great. Took me awhile to get used to your style but this tutorial was really well explained I have not tried a building dive yet because I did not know the mechanics of the trick great explanation thanks drew I will start low and build up. One more thing your vids are always so much better when Ashley makes an appearance. Keep em comin
Really educational video love the channel 👊
So damn jealous! Want that iX12! Gotta keep saving. Love your videos.
So jealous! I ran out of CW props today! I dont know how that happens. Now I have to wait. DREW ...I need help with antenna management. My zip tie shrink wrap receiver wires take a beating.
OMG, I love that I am not the only one going extra miles for zip ties in the right color ^^
Thank you very much for this nice tutorial, Drew.
The going-over-the-roof part is really scary, but looks so cool.
Also, when you were explaining with the quad in your hand I suddenly heard: "Spider drone... spider drone...." singing in my head. ;D
Awesome tutorial! Simple and entertaining! 😎👌🏼 keep them coming!
Is this finally another le drib tutorial?
Awesome tutorial as always so smooth..thanks man 👍
Cool tutorial! I need this when I was in CO. I sat under an awning so I lost video before I reaches the top. I was still a lot of fun tho.
The blue thing is a de-soldering vac thingy, what you do is you push the plunger all the way down, heat up the solder you want to remove, hold the tip to the solder, push black button to release plunger, suction carries it way.
Thanks for the great video. Would there be a chance you could do a tutorial on a regular split s? I am working on them at the moment but would be great to know how to get them nice and smooth. Keep up the epic work on the vlog
Great tutorial. More please!
Thanks for the class. Keep it.
Okay, the smooth dives are a favorite but, I really want to see one of you crazy pilots go for a huge dive without pulling away from the building and bringing the drone to a nice gentle bit fast landing. It would be so crazy to see a smooth stop right at the very base of the building. Love these older vids Drib. I revisit them often. Cheers
Stepping up the tutorials and editing man! Imma find an abandoned building and try this haha
Perfect! I love this kind of video , very helpful!
As an “old guy”, I had no idea that this was “a thing”? Way too cool
Great video mate
Sure, day old video, see how you are...
Good tutorial - perfect timing for me. been sim diving, and can't seem to get in tight. Great explanation, you make it seem so much simpler than it feels if you just have at it. My brain isn't used to staying nose down, so I have no feel once I pitch in. Your explanation helps a lot.
You do great tutorials - I'm always glad when you upload one, even if it's not fresh...
Enjoy your new solder sucker - got the quad box myself - I've been getting it for 4 months, and it's always been worth the 50bucks, but some of the tools are a tad on the cheap side. Minor point, I recommend it to anybody that flies much. Love the shirts & I've got lots of new props to try in the spring...
Not many bandos around here, especially diveable ones, but I'll find something to crash around...
Thanks for a great tutorial.
so jealous of the IX12!!
9:28 Pitch Back/9:37 Pitch Up. Which is it? Which is correct?
Enjoyed. Now I have to fined place to practise.
FInally you got the IX12 LOL ... ive had it forevery its frikin AWESOME YOUR GONNNA FRIKING LOVE IT!!!
Great video
This is my old high school nice great video
Great video, thanks for all the links. After this Corona problem, you should give classes, maybe once a month one day class ten students per class.
Great video, love the tutorials... The sliver object is a desoldering pump;-)
Up to code building glass is shatterproof, so you can't fall through it, throw a chair.. etc
Can the same technique be used for diving muffs? Asking for a friend (Botgrinder)
zoroe it kinda works. Just don't poke her in the eye when you invert. Lol
freaking love building dives :P my first was the UP headquarters hehehe :D ...just wish I had more opportunities to do them but rural living means there aren't many buildings to dive. Great tutorial! 12:20 lmao
Great video :) Suggestion; can you fix the focus on your camera? I don't know if you realise, though you're constantly going in / out of focus as the lens adjusts.
Awesome! really useful man
Great video thanks 👍👍👍👍
You fly it like you stole it. So impressive.
The old Lee Plaza building and Detroit Collegiate Prep on West Grand!
Living it up at the hotel bandofornia
Thanks so much! I needed this!👊😎
It´s an unsoldering pump, I can´t believe you´ve never seen that :D
@@jamesrostie4784 Yep it definately sucks at soldering.
It can help a lot! In German it's called "Entlötpumpe" 😅
That's so funny he didn't know that 🤣 Most cheap beginner electronics kits come with one.
hell yeah review of ix12 and if have problems...
Yayyyy more drib!!!!
Hey Drew, I hope I can help for once: Its old as fuck, but at 12:30, if nobody told you yet, that thing is used to remove soldered metal. Like it sucks the molten solder away, when you push the release button.
that solder sucker is the same one i use to have ,it is absolutly crap .throw it away ,soon as you press the button it dismantles its self into pieces lol
What drone do you need to do building dives I want a complete set
Nice Tips.
Saludos desde México.
"Yeah here we have an abandoned multi storey building to dive, hey thanks for the free radio Spektrum" ..... The 1 Percent...... 😉
Ha... my old high school. C/o ‘97 (damn, I’m old).
Nice video, but could u maybe explain how to flip the drone down so that the Camera looks straight down ?
Love your videos ..Can I have your old radio? 😁
Is any of this possible with a non fpv drone?
1:14 DREW LOOK OUT THERE'S A SNIPER WITH A BLUE LASER SIGHT POINTED AT THE BACK OF YOUR HEAD
The office portion of the video was especially snappy and humorous. You must have been in one heck of a good mood. :)
6:36 Looked sloppy? That looked freaking cool. I havent seen (not saying it doesn't exist) anyone dive a building upside down with rthr camera facing the video. Tgat would be awesome, especially with a late pullout. Sounds like something Cricket would do.
out of interest.. i haved an x140 type drone... its kinda zippy... would you suggest zero prop spin at zero throttle ... or to leave a little spin to add control.. its contentious i know.. i just wanna know for me :p cos im ive just started learning to properly acro/rates
steering on the way down- only yaw?
I am just starting to fly FPV without making dumb mistakes.. I have to learn how you got started the split s into the dive like that.. I can power loop in open air, no obstacles lol And split s (kinda) in open air, no obstacles
And that’s it!! LMAO. No other tricks yet.. But I am putting in the time and effort to be successful...
You make it look so F****ng easy!!
3:38 damn this gonna be a problem for me because my pull out game is weak hehehe
Drew, I just noticed the 2 lil color test dots on your hair @ 1:14 LOL
SOLDER SUCKER exactly the same for the first time I used about 32 years ago
What antenna you use on the quad?
looks like a stock rubber duck antenna
What VTX antenna do you have there?
So he does not build his quads ie solders boards? (12:30).
No he just solders clean ;) like his corners.
Can someone please help me.....while diving,do we have to keep the throttle on to control the quad?Pls Answer
Thanks!
Can I make that transmitter antenna mod to my Spektrum dx8 Gen 2 Transmitter?
Ok so what’s up with the blue dot on the back of your head drew ?
Thanks for making this video. Asked stingy once and he came up with some self righteous comment that he didn't want to teach anyone how because he didn't want people trying it. I did it anyway, but it would've helped to get some guidance.
I'll kick Kevin for ya next time I see him ;)
Le Drib hahaha thanks man! :D
Le Drib
Just a quick question.
What camera angle are you flying with? and do you change it or always fly with the same angle?
I love boxes in the mail😎👍
Why didn't you put this on Drib 2? Love your tutorials!
can you do this with any drone?
It's a solder sucker but the ones with the built in iron (IMHO) are so much less frustrating.
Yea!!!!!
Ooh I want one of these propwash t-shirts!
12:30, come on, that's a desoldering pump, very useful indeed.
2:00 cue in a 9/11 video (sorry, downvote me)
Andrew Zaborowski 😂😂
tool is for removing solder usualy for THT holes for pads is beter soldewick
Harmless tree ?? Those things eat drones ! :D
Hey you aren't in Detroit! ;) Welcome to the Mile High man. Grind don't Stop!