I found mine recently, I don't have the radio bummer. I believe it needs gears. I asked losi in a DM a couple months ago for parts that we need the mico t to make a return and here it is! Nice
The 36th ran for a while and died to the 24th line of 4wd cars back in the day. So I can't blame them, they tried it once! And 24th won, so why try again
Disconnect the upper control arms at the hub, mount the transmission, tilt the axles out insert them into the transmission and reconnect the upper control arms. Boom.
@Restless2010 you're 100% right But as a full time mechanic as a living 🤣 i gotta make everything complicated in the pursuit of not removing excess hardware Definitely easier ways to do what I did but that's just how my brain works for some reason
I was editing this video and checked my phone, and the micro Facebook page was going NUTS over a leak of the new buggy... I was like "REALLY?!?!?!?" IM EDITING THE VIDEO RIGHT NOW!!! lolol I'm great full, the hype on the new micro is really boosting this video and my channel. love to see new faces!
@hunterbreland5612 i dont have one, id gut the whole thing and replace it all. The factory RX is just bad IMO, and the transmitter takes 8 AA, rather than the modern 4AA I would go this full route. You can save some money with this though Readytosky RC 20A Brushed ESC Electronic Speed Controller w/Brake for RC Car Boat Tank(2PCS) a.co/d/2xnh1wn Keep your factory brushed motor
@hunterbreland5612 These servos I've also used. They don't fit, i took alot of time sanding all 4 sides of the servo and even then it was SUCH a tight friction fit inside the factory chassis. But they perform well when installed Beffkkip 4Pcs SG90 9g Micro Servos for RC Robot Helicopter Airplane Controls Car Boat a.co/d/8uYnD07
What motor/esc did you use? I still have mine brushed and crammed everything in the battery bay area of a DT chassis with my 150mah packs velcro'd to the top. I killed my 2-in-1 2.4ghz board that losi offered that worked with brushed/brushless and 3 wire servo. I got some cheap brushed esc off amazon and decased a spektrum receiver also. Totally hack, but I just run this around the apartment once in a while for the cats to chase it. lol! Was hoping this was a 'micro-t' vs 'micro-b' video so I could finally see the size difference. The micro-dt is as big as I want for in the house. I have the micro-sct and it's just too big/too fast for my house, so it basically sits on the shelf. It has the old brushless 2.4ghz board in it, but only binds with a DSM1 transmitter, so I don't use it. Was kind of odd as the one in the micro-t before I ruined it would bind with a DSM2 transmitter (DX5C) that I use.
I used to have 2 of the micro. I wish I never sold them. My friend wanted them when I was younger. So we worked up a deal. and his dad bought them from me. Wish I never got rid of them 😢
I've been doing RC since the late 80s.
I quit in the mid-90s.
After the Army, I am back into it. I have never seen this little buggy.
Very cool.
I found mine recently, I don't have the radio bummer. I believe it needs gears. I asked losi in a DM a couple months ago for parts that we need the mico t to make a return and here it is! Nice
It's been more than long enough for a new release of the micros ......cmon losi let's get on it already 💯
They will be in about 6 hours from right now
They just released them starting with a micro b. Check out their site
They'll probably never make another 1/36 scale. That new 1/24 buggy they call it a micro.
The 36th ran for a while and died to the 24th line of 4wd cars back in the day. So I can't blame them, they tried it once! And 24th won, so why try again
This makes me want to rebuild my micro t. I'm super happy that you showed all the parts you used!
Glad I could help!
Awesome video great info!!! Love my micros!!! Mini Z esc receiver boards work great as well if you want to keep the 5 wire servo
@sinistercustomsx2434 i was curious about the new hobbywing mini z esc but I figured I've used this system before and liked it
Disconnect the upper control arms at the hub, mount the transmission, tilt the axles out insert them into the transmission and reconnect the upper control arms. Boom.
@Restless2010 you're 100% right
But as a full time mechanic as a living 🤣 i gotta make everything complicated in the pursuit of not removing excess hardware
Definitely easier ways to do what I did but that's just how my brain works for some reason
I love this, I always wanted a micro t when I was younger. Hopefully these little guys make a comeback!!
Micro B released this morning ;)
Ironic timing!
@@dflunk5381 I know man I saw that like oh perfect timing!
2-in-1 Brushed ESC / SLT Receiver: Micro B/T ( part number SPMXSE2825RX) It is designed to be paired with the LOS-1870 motor
I was editing this video and checked my phone, and the micro Facebook page was going NUTS over a leak of the new buggy...
I was like "REALLY?!?!?!?" IM EDITING THE VIDEO RIGHT NOW!!!
lolol I'm great full, the hype on the new micro is really boosting this video and my channel. love to see new faces!
Now we need a Micro-B video. I just ordered one but they're OoS till March or so....Sucks. I ordered it to have something to do indoors for winter.
@@bra1nc417d will do!
Could solder all the leads to the receiver . Cool !
@ebandcamp yea but then it's a pain in the neck to remove anything, i was thinking a sanwa receiver would fit great layed down too
Bug was awesome. Show us when finished
Those are awesome! I need to get me a micro! I just subscribed to your channel. 👍👍👍👍
I’d like to see a micro race❤
@@DavidVidaurri man that would be alot of fun
whats your recommendation for a stock replacement battery thats still compatible with the quick charger?
@hunterbreland5612 i dont have one, id gut the whole thing and replace it all.
The factory RX is just bad IMO, and the transmitter takes 8 AA, rather than the modern 4AA
I would go this full route.
You can save some money with this though
Readytosky RC 20A Brushed ESC Electronic Speed Controller w/Brake for RC Car Boat Tank(2PCS) a.co/d/2xnh1wn
Keep your factory brushed motor
@hunterbreland5612
These servos I've also used. They don't fit, i took alot of time sanding all 4 sides of the servo and even then it was SUCH a tight friction fit inside the factory chassis. But they perform well when installed
Beffkkip 4Pcs SG90 9g Micro Servos for RC Robot Helicopter Airplane Controls Car Boat a.co/d/8uYnD07
@@hunterbreland5612 people do use 1cell lipos for factory RX/ESC
Chase ! What up brother 😊
Hey hey!
What motor/esc did you use? I still have mine brushed and crammed everything in the battery bay area of a DT chassis with my 150mah packs velcro'd to the top. I killed my 2-in-1 2.4ghz board that losi offered that worked with brushed/brushless and 3 wire servo. I got some cheap brushed esc off amazon and decased a spektrum receiver also. Totally hack, but I just run this around the apartment once in a while for the cats to chase it. lol!
Was hoping this was a 'micro-t' vs 'micro-b' video so I could finally see the size difference. The micro-dt is as big as I want for in the house. I have the micro-sct and it's just too big/too fast for my house, so it basically sits on the shelf. It has the old brushless 2.4ghz board in it, but only binds with a DSM1 transmitter, so I don't use it. Was kind of odd as the one in the micro-t before I ruined it would bind with a DSM2 transmitter (DX5C) that I use.
Full build list is in the description!
I've been lacking in the videos, I need to get back to them
I should do a video on the 2 micros then and now+
@@chasentrophies Ah, didn't see that at first. 10300kv?!?!? That seems super high!
Losi is set to release a new micro b soon
@arhamrasool43 I noted in the video about that 😆
While editing this video the buggy 🤣was leaked 🤣🤣🤣
I used to have 2 of the micro. I wish I never sold them. My friend wanted them when I was younger. So we worked up a deal. and his dad bought them from me. Wish I never got rid of them 😢
Damn! Well the new micro B is here! And the chassis losi micros can be found on ebay! So you have options again!
Sick dude
🤘🤘🤘
Might be about time for you to get me new bodies so I can make them even better
@@jokersnyderracing9458 id be down!
How to get a hold of the guy who makes the chassi
@andrewclark-ql5eg i linked his ebay, and he's on the Facebook page, he's an admin.
He has some colored carbon chassis for sale! So go find him!
Sweet video mate! went to sub and already was😅
I cannot find the group with the name you provided.
Should be first thing to there! Super active right now with the new micro release