Adam Savage's One Day Builds: Ghostbusters Ecto Goggles!
HTML-код
- Опубликовано: 27 сен 2024
- After Adam finished his epic spacesuits build this past summer, he decompressed from that months-long project with a return to his ongoing Ghostbusters costume improvements. And that meant resuming work on his lightweight wearable replica of the Ecto goggles he's building from scratch. It starts with painting and dressing his vacuum-formed shells and them outfitting them with hand machined knobs and lenses. Here's how Adam got this essential piece of Ghostbusters costuming ready for his incognito at New York Comic Con!
Adam vacuum forming his Ecto Goggles: • Adam Savage's One Day ...
Adam wearing these goggles in his Ghostbusters cosplay: • Adam Savage Incognito ...
Shot by Adam Savage and edited by Gunther Kirsch
Music by Jinglepunks
Join this channel to support Tested and get access to perks:
/ @tested
Tested Ts, stickers, mugs and more: tested-store.com
Subscribe for more videos (and click the bell for notifications): www.youtube.com...
Twitter: / testedcom
Facebook: / testedcom
Instagram: / testedcom
Discord: / discord
Amazon Storefront: www.amazon.com/...
Savage Industries T-shirts: cottonbureau.c...
Tested is:
Adam Savage / donttrythis
Norman Chan / nchan
Joey Fameli www.joeyfameli.com
Ryan Kiser / ryan.kiser
Jen Schachter www.jenschachte...
Kishore Hari / sciencequiche
Sean Charlesworth / cworthdynamics
Jeremy Williams / jerware
Kayte Sabicer / kaytesabicer
Bill Doran / chinbeard
Ariel Waldman / arielwaldman
Darrell Maloney / brokennerd
Kristen Lomasney / krystynlo
Intro bumper by Abe Dieckman
Thanks for watching!
#AdamSavage #OneDayBuild #Ghostbusters
Adam vacuum forming his Ecto Goggles: ruclips.net/video/lsXLGT5N2uo/видео.html
Adam wearing these goggles in his Ghostbusters cosplay: ruclips.net/video/f24n1GKqyNc/видео.html
Join this channel to support Tested and get access to perks:
ruclips.net/channel/UCiDJtJKMICpb9B1qf7qjEOAjoin
Tested Ts, stickers, mugs and more: tested-store.com
If one of you fine folks over there at Tested gets a moment, can you ask Adam (and then share here!) what tool/set-up he used to put those snaps into the straps? I've been looking for something to do that on a project and I really don't even know where to start.
I may not be able to get the same thing he's using, but it would at least give me a starting point.
@@Bad_Wolf_Media It looks like he is using a Press-N-Snap. If you Google that or Snap Kit or Snap Pliers you will find a bunch of different ones at a variety of price points.
In response to the opening talk Adam. A great man once said;
"Really if we are all going to be honest with ourselves I have to admit that achieving the end of the exercise was never the point of the exercise to begin with was it?"
You. It was you mate. That quote from your ted talk has stuck with me for over a decade and i still revisit it whenever im feeling creatively drained.
You could have a live camera feed going in your cave and I'd have it on 24/7 just to hear the sounds of work being done. That alone simply inspires me to work on my own projects vs. them getting half way done then losing steam b/c I really have no idea what I'm doing most of the time.
I spent two years working on a model of a wooden tall ship, and when I had done my "editing passes" and installed the model in its case, it came time to clean my workspace and take the plans down off the wall... and yeah, I felt that. I really enjoyed the process of this thing coming into existence, and seeing the plans come down really drove home that that process was finished. And talking to a few older gentlemen who have multiple such builds under their belts, I learned that they had felt the same thing too, several times. So it's not weird to hear that such a major focus for you can create bittersweet feelings once it's done.
Nice work on the goggles Adam! =D
You or Adam should upgrade a pair to Podcast's version.
It's awesome seeing a master do his/her work and even more enjoyable when they are doing it because they choose to. The passion and personal motivation shows
Who else is looking around the workshop in these wide angle shots. So interesting trying to spot..........stuff!!! 😁👍
Oh joy, you illusive beast, bearing no relation to achievement nor gain, I hope you reign in that beast again soon.
Mr. Savage, thank you. My father (machinest, mechanic, and more) also did not like to use glue which I never understood. With your insight into why I have a learned a bit more about him. One reason I like watching is learning more about my father.
This is about the most subtle weathering job we’ve ever seen from Adam. No rust, dust, crust, or slapping with chains…just subliminal hints of use, of used-ness. Nice.
I have never seen anybody put a bearing on the end of the stock and then stick it on a drill chuck. Pure genius.
I could watch these videos all day
I just watched an Adam Neely (*bass) video where he goes over the feeling of depression/emptiness after a big gig where you spend a lot of time prepping for it. When it’s over, there’s a feeling of being lost. After putting so much effort and energy into something and feeling all the highs of completion/success, the pendulum swings the other way to the dark side. His recommendation was to immediately start to look toward the next project to minimize those feelings. It’s a pretty common thing, but there are ways to mitigate it. Knowing is half the battle. 👍
Adam Savages love for making things is the only real universal constant. And I love it
Great job! My son and I (13 years old) will be challenging a build of the complete Ghostbuster cosplay from now until October 2022. Looks like we'll be 3D printing the goggles starting this weekend! :D
Amazing! If you're on Twitter, please keep us posted on your progress!
'The most beautiful knurl, in the world....' 🎶
We the internet are totally content with just watching a man work
I like this long form version. All good.
Always great seeing how happy Adam is when he is working on a project that he loves. Though one thing surprised me, the fact that he did not make the lens housings actually move like they would do from sourced camera parts. (Or be able to source a similar looking set from old stock.). As the Leader of the Capital Ghostbusters of Ottawa, Ontario, Canada, I approve of this One Day Build!
Hopefully one day Adam will put in the Polaroid feature.
Loved Podcast's version too.
Adam your channel gives me so much joy. I love that's there's a place where us nerds, fanatics and makers can come to and rejoyce! Thanks for what you and your team does and the consistent uploads👍🏻👍🏻👍🏻
Cabinet doors and a label maker is what I’d need
You are in love while you create a masterpiece, when the romance is over you feel the loss
This is soo relaxing to watch.. "Disk sander noises" is like Metallica playing Enter Sandman :D
Post-Race Blues is what runners or triathletes call that "down" feeling. Completing something big that you have poured yourself into leaves you feeling empty. The number one way to try to mitigate the blues is to set another goal to look forward to, ex. another race or project.
So I guess what you would call what Adam's feeling "Post-Making Blues" or Post-Build Blues?"
One thing that still surprises me about your shop, is that you don't have a spray booth, even a small tabletop one. That is the next thing I am adding to my workspace.
For a minute there I was convinced he was going to knurl his fingers! Beautiful work!!
Him saying "Hey kids" at the start reminded me of Sam O'nella. I miss that guy
Sweet!
I would kill to have a light weight ecto goggles! 😩
Get some yellow snot for the eye cushion material. 3M weatherstrip adhesive. Also works as a waxing gel if you're not too picky about what your skin looks like.
I don't think I've ever been as nervous watching a video as I have been watching that approach the face lol
PPD after a big project comes together and is finished? Oh yeah, brother, all the time. Which drives me, inevitably, to the next feel-good project.
awesome as always :)
Nice!
I get that post project blues, I figured it's just a normal thing. I get it when finishing a good book or tv show too.
Lol when he's not talking to the camera I feel like I'm spying on him lol
Right. Aim the torch at the acetone container. That will weather everything.
“Are those heavy”
“Yeah”
“Put it down, it’s expensive”
Love this video great to just watch you work!
Almost all of those snaps have a coppery brassy Ness under the final finish...take one and go byons a little scuff it comes out a brighter color but over a week or so it really darkens up ..or after you scuff use some cold blue and rub it off
Suggestion: You should look into a scissor knurling tool. It applies pressure on two knurling wheels top and bottom and pressure is controlled by a thumb screw. It alleviates the side pressure on the workpiece.
I have never had very good luck with a side pressure tool like this, but I also do diamond pattern knurling more than straight line.
As soon as I saw the texture of the padding, I knew EXACTLY where you got them from, that is brilliant, I can't wait to put that on my own.
Where DID he get them from? I ordered the original padding for the NVG from eBay but never ended up showing up, and the real thing is pretty hard to come by now. Is there another source?
nevermind jfc I swear I buffered through this video more than a few times to find the answer...
I can't even find the cheap aviator padding now! All the Amazon ones seem to have a bridge in-between the eyes that would have to be cut out.
I was quite surprised when RUclips gave me an advert for Ghostbusters Afterlife in the middle of this. It's not like them to use something so relevant.
Wow. Those look great. So when do we get to see a one day Build for a RTV Ghost trap?
great work, its nice to see the care you put no only on the final results but also on the process, i hope i could convey this attention to detail to my students, you inspire me a lot, greetings from Coobia.
AN/PVS-5 night vision goggles, modded up. Many bits of the Ghostbusters kit was modded military surplus like the backpack frames.
Adam should add a couple of finger or glove prints of a UV fluorescent paint where you would naturally grab it to pull them off, as though he forgot to clean off some ectoplasm after a busting a ghost.
Glad even the pros end up bleeding when working on stuff...LOL
you need to add some dried ectoplasm
Absolutely love watching these- particularly GB builds. Do you guys think we could do some more simple builds- like Star Lord’s Walkman- that’s scratch built, and we could follow along and do at home without buying a load of cast parts etc. The scratch built prop builds are amazing.
"That's the one that got me."
Wow. Could someone point me to the music that was playing during the time lapse build montage section? It really struck a chord with me so to speak. I really really dig it. Great vibe!
You gotta do the ghost trap at some point or even the PKE Meter
You know, I think I'd really like to see Adam to a project where he's basically handed a hero prop from a film and told "Ok, we need you to make another hero quality standin of this prop, as well as a stunt version, and about 10 more backward quality level copies of it" Just to see how he tackles that sort of duplication. Cos I feel like that's a lot of what some guy working in the proper department of a movie would do.
When Adam says he clean up the shop i always think where did he do that.. 😅
What's the reason for using the baking soda?
36:24 That's why they call him Savage.
I want one. If you make any more.
Wow so early!
your so fast
Anyone else watch footage of the Cave and pretend it’s an “Eye-Spy” book and just look for Easter eggs?
Above the lathe: is there something blurred out in post that we can’t see?
On the bench, next to the can of “redacted-D40”, is a votive candle. Wondering what the image is on the front?
Who else spies with their little eye?
Hey Adam, I was thinking with all that stuff you have, how do you know what you got in your shop?
I love Adams builds; always a pleasure to watch.
But I do wonder if he's ever considered trying to add functionality to prop replicas... Like an ir monocular and a telescoping jewelers loupe to these goggles perhaps?
Do they make an adapter (you make one) for your air cutting blade to mount a sanding bar, seems it might have even better control than by hand , faster and way easier on your wrist
Hi I’ve watched most of not all of your posts and I’ve seen you use bicarbonate of soda dusting on things as you make them. Can I ask what that is for please? Sorry if I’ve missed the explanation for that in the past! 👍
What is that cool acetone dispenser?
How about a Spengler latex/rubber mask?
Re-watching this and thinking "Ah! Now What Syndrome!"
Is the red acetone bottle available for sale someplace? Thanks!
Should try and make a PKE meter
Hi Adam, here’s a challenge: Any chance you could please do an Amazon-but-functional Belt Gizmo 1-day build? Sort of a gateway to GB prop / cosplay / toy - making for those of us for whom a Hasbro pack might be a first step into a larger world. Thank you!
you need a second one that is clean so you can have the before ghost busting and after
Am I the only one who though Adam did this already?
What is the red pump looking can on your workbench?
I would of thought you might of put some auto focusing lenses from a camera on it
With all the dust and everything in your shop how do you keep your space suits in the background so clean and shiny?
You need a kitchen scale in your shop :-).
I used one of those extra VR padding foam inserts for mine. They're dirt cheap.
whats with the baking soda at the start while sanding?
i thought for sure that kicker was going to make you yowl when it hit your fresh cuts
did you get a new tool holder for your lathe, i like the way the tightning nut is away from the tool carriers, anyway brill video as always thanks for doing all the stuff you do for the maker world, including sharing your years of knowledge with the community
Hi Adam Savage
you say the spacesuit is finihed, yet they are not weathered in the back of the shot, clean and unfinished
Why do you have the WD covered up on the WD-40?
I feel as if there should have been a third space suit in blue, like Boeing space suit blue
Adam could have added some of his blood to the straps for some extra blood and grim.
Hugs
lol, the "new car" comment.
*buys new car*
Adam: oh baby I'm going to have so much fun weathering this, couple of oil passes, some sandpaper...
Deal: What?!
Adam: What?
Can you make the goggles functional?
Imagine of adam was such a fkn boss (he is) that he actually put a functioning polaroid camera in his ecto goggles
Finally another build video! I gotta admit I was getting a little burnt out on the patreon questions videos...
Couldn't you have just gotten an old non-functioning set of PVS-5s for the base?
I'd buy a pair if you sold them
Olive Drab II - the sequel outdid the original, but is it better than the one that capped off the trilogy, Olive Drab III ?
Watching this I realize you can monetise anything.
Just you wait until i can get a few hours recorded & I'll be back.
You must've been in a funk to neglect the eyewear while using the power tools.
Builds goggles, but doesn’t wear goggles while building them
🥽
What happened to your Dino build ?
Completed a big project? The space suits in the background clearly aren't weathered yet.
Totally get the depression you get after finishing a project sometimes when I don’t have a time restriction I like to stretch it out just so I can milk the experience. It’s the journey not the destination as they say.
DEAR ADAM 🤣can you please do a video on the ghostbusters pke meter many mods out their for it ! however i got a genius idea ? how about making a ghostbusters pke meter that can actually do what it was intended for detecting ghosts lol ...no...now wait a second i`m serious acording to todays readings we can indefenatly trap a ghost lol ...so my request is this `dear adam can you get the spirit halloween pke meter and do a mod on it or make one from scrath with lights and sutch movi film acurate ...if thats possible the fans would love it i would love it ....but with a twist ? yeah at most hardware stores they sell something called a ``voltage meter ``pen esetually its used by electricians to detected air born eletric fields lol ..lol you know what comes next its only like 20 bucks the `voltage meter ``pen so what i was thinking is adam please put the lectronics of the ``volatage meter into a ghostbusters pke meter so that it can actually detect air born electri fields but somehow its got to activate that machains of the ghostbusters pke metter now thats my busters chanllange for you can you ghostbust for real with a pke meter allready the paranormal community uses emf detectors to detect ghosts i done many ghost tests i doubt a emf meter works on ghosts but a voltage metter sounds more promessing ghosts leek electrons when the move that can be detected by a simple store bought hardware called a ``voltage meter ``pen its tinny enough to fit into the pke prop now to get those two devices coralating hum...thats quite the chanllange i havent been able too was wondering if you could ? yes its my idea and i`m giving it to you adam so can you please mod a ghostbusters pke meter prop to actually dected ghosts ? NOW THAT WOULD BE MOVIE ACURATE ...AND NO ONE HAS EVER DONE IT BEFORE PLEASE AND THANK YOU ....KEEP ON BUSTIN LOVED YOUR WISTLE ON THE NEW FILM WOW ! MY BROTHER IN LAW LOVED THAT SCENE THE WISTLE SECENE NICE.....