How To: Hellcat Oil Change & Drain Oil Cooler
HTML-код
- Опубликовано: 8 июн 2024
- A how-to on changing the oil in your Dodge Hellcat SRT Charger or Challenger, includes draining the oil cooler.
Oil Filters (One needed, take your pick, I use the SRT One)
Mopar Filter (Stock) www.amazon.com/Mopar-4884899A...
SRT Filter www.amazon.com/Genuine-Mopar-...
Oil - Dodge recommends Pennzoil Ultra Platinum 0W-40 Full Synthetic with stock hellcats
(1 Quart) www.amazon.com/Pennzoil-55004...
(6 Quarts) www.amazon.com/Pennzoil-55004... 
Авто/Мото
Fought with the dealer and lost on this one. They refused to put on the SRT/Viper filter as they said it wouldn't fit, but now I have proof. Thanks!
Phil G yup it fits great and has slightly higher flow rate.
@@CasualRacing I knew about the flow rate for sure, and was sure it would fit, but there was no arguing with the mechanic. If I had the means, would definitely had changed it myself.
Phil G the dealer probably will just do everything by the book with what their manuals tell them. The srt filter is made by wix filters so you could also find a compatible one from them which would basically be the same.
@@CasualRacing good to know. Thank you very much.
Great video. Perfectly done
Great vid! Thanks for posting!
Perfect 👍
I wonder how many oil changes you can do before the push pins break on that 2nd panel. What a pita!
You notice how he uses another wrench to back up the oil cooler plug? Always do this or you can twist the cooler flange and ruin it on the spot.
Yep, yep.
FCA tech here nice to see a torque wrench used! Great video brother!
I got my stickers today brother
BRAAAP SQUAD 👌
That's how my bowels drain after I eat taco bell
And I thought I was the only one......................
So with any oil cooler you just have to drain it that’s it?
I notice that there seems to be two nuts to drain the intercooler. Is that the case?
Robert Lyon just one nut for draining the oil cooler.
Should have left the panels off after filling with fresh oil to check for any leaks. PITA to uninstall everything if ya have a leak.
Why do you have to pour oil in the filter? Doesn't the oil go into it when pouring new oil in?
Mr A car pumps oil through the filter when it’s running. Good to prime the filter with oil before reinstalling so there’s not a period where it’s not pushing oil through when you first start it.
You were not using the "Pennzoil Ultra Platinum OW-40" the only motor oil for the SRT that approved by the FCA to meet the Chrysler "MS12633" toughest and highest requirements. Your car engine is going to suffer premature piston ring wear and developed awful sludge problem (end sarcasm).
slonold lol haha. My engine was previously rebuilt and the engine builder recommended the type of oil I’m using now :P
No Grip NC engine ran lean at the top end of the track and took out a cylinder.
No Grip NC I run the driven brand oil in mine just because it’s what the engine builder recommended when they rebuilt it.
Nobody else made the comment so I will, if there was a time to have your black latex gloves on ,it would have been when you pulled the oil filter. Other than that, nothing special.
I actually don't bother with the gloves at all anymore.
@@CasualRacing keeps you from the chance of getting skin cancer from repeated contact with the oils and grease.
Lol dodge owners can't change their own oil.
Clearly this video shows you otherwise.
I change my oil every 1000 miles. I race on the freeways. Do ricers not know this car has 840 horses? Maybe they belong on the 8000 island country. I just dont get it......WTF....are they on drugs?
Are ricers a futuristic type of people?