It’s a criminal offence Chevy didn’t offer the T56 in the Silverado ss, would have completely transformed the driving feel. A manual in a truck is priceless fun.
@@Pecas85 idk why chev was so fixated on using that garbage ass electronic 700r4 all the way till 2013, for crying out loud ram had an 8 speed truck by then😭😭😭
@@chrishansen7004Don’t forget how shit the 8L90’s were too…. To the point that Chevy had a class action lawsuit and lemon laws against them… For the most part, I know people custom tune the trans and run the revised Mobil 1 Dexron HPLV ATF, which is super specific for it, and supposedly keeps it good (for however long…)… The 6th gen Camaro’s however, I hear, did better with just the revised ATF being flushed and swapped in, with no auto trans tune/re-flash done. This is usually the case with the same trans between the trucks and cars…
Do you know if the sst shifter works on my Silverado 1500 2000 stock 5 speed and how or where can I ordered it thanks in advance I I hope you get to read me thank you.
Once you get the funds and Holley Terminator X I’m sure you could eliminate the brake warning issue. I’d really like to see some shots of the remote shifter you made.
Hey man great video. But you skipped out on a key part of your swap. The people wanna see underneath and I my self would like to see how your buddy tackled the wiring for your nuetral safty. There certain color wires that some of us need sorted out. Unless he left it plugged in underneath.
I don’t have access to a lift, but I do have some okay clips from when I went to the muffler shop, I have posted them as shorts previously, and he left the wires unplugged
@Andregarcia5.0 I'm sure iv already watched them will probably watch them again. I watch all your videos when I can. I'll let you know if I can see what im looking for but I'm probably not the only one that wants to see the wiring. There's reverse lights that need to work when in reverse and certain wires that need connected. Basically fishing for info cause there ain't none online
@Andregarcia5.0 gotcha so we're both tryin to figure it out. Alright if I figure it put I'll make a video and tag you in it. I'm on a endless search to figure all of this out
@Its_Ulicis I'll have to let you know if that worked or not. I got a 01 gmc but im putting a 05 nv3500 in it so we will see. If there the same. Thanks for the info I know exactly what wires your referring to
can u make a parts list with links for this swap?
It’s a criminal offence Chevy didn’t offer the T56 in the Silverado ss, would have completely transformed the driving feel. A manual in a truck is priceless fun.
That’s why we gotta do it ourselves 😎 I got a t56 swapped 03 Sierra
@@Pecas85 idk why chev was so fixated on using that garbage ass electronic 700r4 all the way till 2013, for crying out loud ram had an 8 speed truck by then😭😭😭
@@chrishansen7004Don’t forget how shit the 8L90’s were too…. To the point that Chevy had a class action lawsuit and lemon laws against them…
For the most part, I know people custom tune the trans and run the revised Mobil 1 Dexron HPLV ATF, which is super specific for it, and supposedly keeps it good (for however long…)…
The 6th gen Camaro’s however, I hear, did better with just the revised ATF being flushed and swapped in, with no auto trans tune/re-flash done. This is usually the case with the same trans between the trucks and cars…
Badass , I put a summit crate motor in my rcsb , now it looks like I’ll have to drop a six speed in, thanks for the info
You make me want to go back to n/a just to do this style exhaust 😂
You can always do a turbo back full exhaust 🙆🏻♀️
@@Andregarcia5.0 already have
I have a single cab 2005 gmc sierra manual v6 4.3. Could I swap the manual transmission and engine from the ss much easier ?
The long awaited video 🙏🙏🤌
Thank you 🔥🔥
What kind of clutch pedal did you get for it (been looking to replace my plastic one for a while now)
Did you have to swap the tail housing for spline on tr6060 or just get a custom drive shaft that bolts up?
Awesome truck brother! Sounds great too👍🏻
What I'm thinking of doing is getting a standard V6 silverado and slapping a 5.3 in it, any recommendations for that stock v6 transmission?
Been waiting on this, W vid 🔥🔥
Thank you brother !! 🔥
What cross member did you use?
Can someone explain to me why so many people push the accelerator to the rev limit prior to shifting?
Can you use stock starter?
Do you know if the sst shifter works on my Silverado 1500 2000 stock 5 speed and how or where can I ordered it thanks in advance I I hope you get to read me thank you.
Once you get the funds and Holley Terminator X I’m sure you could eliminate the brake warning issue. I’d really like to see some shots of the remote shifter you made.
How much of this applies to a 2014 silverado?
Hey what’s the part number for that LuK slave cylinder? If you can help me out would be great 🙏🏼
LMC444
Okay fine.. I'll buy it 😂😂
Will a tr6060 fit in a nnbs silverado ??
Hey man great video. But you skipped out on a key part of your swap. The people wanna see underneath and I my self would like to see how your buddy tackled the wiring for your nuetral safty. There certain color wires that some of us need sorted out. Unless he left it plugged in underneath.
I don’t have access to a lift, but I do have some okay clips from when I went to the muffler shop, I have posted them as shorts previously, and he left the wires unplugged
@Andregarcia5.0 I'm sure iv already watched them will probably watch them again. I watch all your videos when I can. I'll let you know if I can see what im looking for but I'm probably not the only one that wants to see the wiring. There's reverse lights that need to work when in reverse and certain wires that need connected. Basically fishing for info cause there ain't none online
My reverse lights don’t work either, I would like to know how I can make them work as well
@Andregarcia5.0 gotcha so we're both tryin to figure it out. Alright if I figure it put I'll make a video and tag you in it. I'm on a endless search to figure all of this out
@Its_Ulicis I'll have to let you know if that worked or not. I got a 01 gmc but im putting a 05 nv3500 in it so we will see. If there the same. Thanks for the info I know exactly what wires your referring to
How do I get in contact with theoriginalmiked about a gauge cluster
I thought manual don't use trans cooler
Good video brother
Thank you brother 🙌🏼
I think I know what brand you’re referring to in terms of header fitment, dealing with the same issue
What’s the brand that you are having issues with ?
Did you use a slave cylinder from a Camaro or Silverado?
Camaro slave cylinder
What company are you referring to for the long tubes, speed engineering?
No sir, it’s gsm headers
How did u made the speedo to work eith the tr6060?
My tuner is the one who made it work
@@Andregarcia5.0does the tr6060 bolt straight up to the 5.3?
Where you located??
Chopper citywidlll)