I’ve been out of the RUclips game for a bit. Had trouble with my account. Finally back and here to say this video was funny af. The sarcastic dry humor was on point, reminds me of my grandpa. P.S. that’s a compliment bc I love Gramps, I’m not calling you an old guy 🤣
Super Impressive build. I love how professional and clean it came out looks like it came out of a factory that way. All you need is some fork speed dampeners for more stability at those high speeds. For me 40 feels crazy but 60 is scary fast for something so low to the ground.
Alabama ain’t that far away from Austin. Why don’t I load up some bikes, come out and shoot an episode sometime of riding this stuff. Maybe you can teach me how to wheelie and jump 😂
I have a question. Do think I can install a kelly controller and electric and co 52 volt battery in a mototec with the stock motor? I'm wondering if they are compatible.
Rough numbers. Swing arm kit $1k. Battery 1.1k, controller 250, forks 300, front wheel and brake 500, cost of the bike (whatever that is) super rough numbers
Speed wobbles are from the front tire being smaller than the rear. I still think you should go with a bigger front rim with a skinnier tire. ( 90/90 - 14) Keep those speed wobbles away.
I’ve got a question I have a 48 V 20 amp battery and 2000 W Vevor motor and I’m only getting around 27 mph. And I thought I was supposed to get around 30 to 35 mph?
So I ordered the ultimate 2.1 kit 3 weeks ago and they deleted the kit and replaced it with the 3.0, do I have to order a new kit or will they keep manufacturing it and eventually ship it
Hey voltron, looking for some help. Today I completed my extreme razor bike build but when I turn it on it beeps once and then beeps very quietly constantly, it kind of sounds like a warning alarm like ee RR ee RR. Do you happen to know what is happening?
That varies greatly, but on 40 amp hours I’ll get 30 + miles easily if I stay out of the throttle. More than I want to ride this thing in one go that’s for sure 🤙
Nice build man, Question: are you using a Sotion controller? Is there one you'd recommend? The swingarm + battery is a hefty dollar, not sure how much I should be investing in a controller. Thanks!
In this build I am using a Sotion controller. You don’t have to. You can build a similar bike with a fardriver controller and a cheaper (but quality) battery from Amorge 🤙
The no chain noise or immediate wheelie is my favorite part of hub motors. Also like you mentioned, once you get them going they feel like they just aren't going to top out. They're great. Ever since I started using hubs I realized how much noise tires make 😂
How are you doing, bro? I look up your watch your videos all the time I like your different Bike builds. And how informative you are on the pit bikes anyways I have a question. I have a Tuttio sole 1 , I was wondering if you think I could get like a 3000 W 5000 W hub motor kit to put in that bike and is there any certain measurements I need to make the wheel fit? I see social has a few a bunch of companies have a few hot motors 12 inch. Do you think the stock 48 V battery would work with a kit or do you think I’m better off buying like that mini controller that electro and co. What do you think I should use a direct drive motor kit would that battery be able to handle it? I do have a 72 V /30ah battery that goes into a Surron or Talaria but I don’t think that will fit in the chassis of that bike. Any feedback on hooking that bike up I I don’t wanna spend a whole lot. I know some of those kids you can get from say AliExpress Alibaba like ocean and other makes a pretty reasonable on the bank. Please let me know your thoughts.
Ppl say electric motorcycles will never take off for a lot of reasons. The real reason is that people are building stuff like this, so there is no point in dropping 8k on a kawasaki ninja with 3kwh of battery that goes the same speed haha
If you were about to really lose it, no words would come out. The fact that you were still talking means you were just at stage 1 of a crash. At least for me, if I'm about to crash, I just brace for it without a sound. Then, afterwards, I make a sound that is awfully similar to what it sounds like when I'm taking a shit.
⚡️Discount codes ⚡️
Electro & Co. "Voltorn5"
Ride or Die "R&D "Voltron"
Econic cycles "Voltron5"
Sotion "Voltron"
Voltron Watts Link Tree 🤙
linktr.ee/VoltronWatts
Not to mention Becci and the team have some of the best customer service in the biz. Awesome kit and review.
Facts! Thank you for watching and commenting 🫡
oh look it’s the guy from face book who makes the cleanest builds
Hahaha! Holla 😂 thank you for being here man!
I’ve been out of the RUclips game for a bit. Had trouble with my account. Finally back and here to say this video was funny af. The sarcastic dry humor was on point, reminds me of my grandpa.
P.S. that’s a compliment bc I love Gramps, I’m not calling you an old guy 🤣
Hahahaha! I appreciate that! 😂 👊
Ride Or Die are awesome!!!
Yes sir!
Man I been waiting for this !!!
Holla! Thank you for watching and being an active member of the community! 🍻
Another great build. 👏 👏 👏
Thanks Mino 🤘
Super Impressive build. I love how professional and clean it came out looks like it came out of a factory that way. All you need is some fork speed dampeners for more stability at those high speeds. For me 40 feels crazy but 60 is scary fast for something so low to the ground.
You’re totally right bro!
That is SICK man 🤘🤘🤘
Hell yea bro! Thanks for watching boss!
great info, love the bike, keep it up
Thanks Alan! 🤜🤛
I gotta build up one of these
Totally bro! 🚀
Alabama ain’t that far away from Austin. Why don’t I load up some bikes, come out and shoot an episode sometime of riding this stuff. Maybe you can teach me how to wheelie and jump 😂
Nice video like always 👌
Thank you sir! 🙏
What a beast 🔥🔥
Yes sir!
Great video man!
Thank you! 🙏
Str8 Fire !!! 💪🔥🔥🔥🔥🔥🔥🔥🔥🔥
Haha! Thanks man! 💜
another banger vid. can you do a video on the new ebox 2.0 v2 if u havent already please
I’ll reach out to them 🫡
Than you for watching and commenting man! 👍
@@VoltronWatts thank you!!!!!
@SKibidisigma12299 🫡
You probably got speed wobbles because of the geometry, the rear wheel is huge compared to the front.
Totally, I now have a matching front and rear wheel size 🤙
750 WATTS LOL 😂 I GOT IT, need that sticker fr
Hahaha! I’m having 40 made. I’ll post a community post here and on the Voltron watts page when they are ready 💪
Th-th-th-thick!!!😂
Hahahah! She thicccccc boi! 😂
Why did it get speed wobbles what's causing it?
I think it had to do with the front wheel being small and I think there was some washboard in the road that didn’t help
How do you set it up with the app? Same as fardriver?
I didn’t even set anything up. I just plugged it in and it went! 👌
I have a question. Do think I can install a kelly controller and electric and co 52 volt battery in a mototec with the stock motor? I'm wondering if they are compatible.
I don’t see a problem so long as you set it up correctly 🤙
Hi I have a question I have both RSF350 AND first gen MX350. Is there a extension swing arm kit them at all?
No. Not that I know of
@VoltronWatts ty for responding I appreciate 🙏🏾 I'll keep looking
Is the stock rear shock in the rsf650 adjustable
Not that I have noticed
Sweet looking build I bet it’s loads of fun as always great informational content 🤙🏽🚀🚀🚀🫡
Thank you as always for watching and commenting brother 🤜🤛
@@VoltronWatts 🤙🏽you know it brother your content has helped and gave me ideas along with your discount codes 🦾🚀🚀🚀much appreciated 💯🫡
💜🫡
The full price for the whole sotion setup with front and back tires and battery. I’m apart of the Razor group so I’m looking to build one.
Rough numbers. Swing arm kit $1k. Battery 1.1k, controller 250, forks 300, front wheel and brake 500, cost of the bike (whatever that is) super rough numbers
Whats the no-load speed of this motor?
I don’t know. I’ll find out 🤙
@voltronWatts can you put the sotion 12 inch hub motor on razor MX 650 without the swing arm
Sure. But you will have to modify the drop outs in the swing arm where the motor axle goes
Probably a dumb question but would getting the tire balanced help with the speed wobble
That small wheel is gunna go and I’ll add a steering dampener. That should help a lot 💪
@@VoltronWatts didn't think about a steering dampener on something so small
Totally! 👌
@@VoltronWatts I'll be looking forward to the video on that particular fabrication when you get there
Will the minimods forks fit the razor Prospect
No.
Speed wobbles are from the front tire being smaller than the rear. I still think you should go with a bigger front rim with a skinnier tire. ( 90/90 - 14) Keep those speed wobbles away.
That front wheel is getting replaced ASAP man 😆
I’ve got a question I have a 48 V 20 amp battery and 2000 W Vevor motor and I’m only getting around 27 mph. And I thought I was supposed to get around 30 to 35 mph?
Speed depends a lot on gearing, the controller and the battery amps. A lot of variables.
I starting my first build do you have any info for someone new to the Hobby. I have a stock RSF650.
I have a whole razor playlist 👌
Stark varg drive terrain in rsf 650
That would be epic!
Can the sotion battery fit in the rsf without the kit?
Nope
Shorts, tshirt, no helmet.... Send it!
#fullsend 🚀😂
Where do you get the kit
18b524-be.myshopify.com/products/sotion-new-swing-arm-ho2-hub-10kw-motor-rsf-kits
So I ordered the ultimate 2.1 kit 3 weeks ago and they deleted the kit and replaced it with the 3.0, do I have to order a new kit or will they keep manufacturing it and eventually ship it
I can’t say. I’d email them and ask. Electroandcompany@gmail.com
@@VoltronWatts thanks
No problem
Hey voltron, looking for some help. Today I completed my extreme razor bike build but when I turn it on it beeps once and then beeps very quietly constantly, it kind of sounds like a warning alarm like ee RR ee RR. Do you happen to know what is happening?
I don’t. Google fardriver beep sequence and drill down what the beeps mean. There you will have your answer
How long of ride time are you getting with that battery. Thanks
That varies greatly, but on 40 amp hours I’ll get 30 + miles easily if I stay out of the throttle. More than I want to ride this thing in one go that’s for sure 🤙
watching this at 4:30 in the morning
My man! Where are you located? 😳
@@VoltronWatts California!
I'd love to see a Walfisk ET-7 with a Sotion motor, although I don't know if the frame can take it.
I had to look that bike up. Looks awesome!👀
Where’s the link or official sotion site you recommend
In the show notes
have you done a video on the b1 bomb moto?
FIRST RIDE! The Bomb Moto B1- Ultimate Electric Pit Bike - 72 Volts, A Must Have For Any Rider!
ruclips.net/video/3_5Hq_DHnv0/видео.html
@@VoltronWatts Thanks brother 👊
I guess you can call it a RSF 10,000 now
Hahaha! Well played! 🤣
Nice build man,
Question: are you using a Sotion controller? Is there one you'd recommend? The swingarm + battery is a hefty dollar, not sure how much I should be investing in a controller.
Thanks!
In this build I am using a Sotion controller. You don’t have to. You can build a similar bike with a fardriver controller and a cheaper (but quality) battery from Amorge 🤙
I have $1000 in the MX 650 frame. What do you think? The best bill is I can do for that
Did you see my prior response?
No
The no chain noise or immediate wheelie is my favorite part of hub motors. Also like you mentioned, once you get them going they feel like they just aren't going to top out. They're great. Ever since I started using hubs I realized how much noise tires make 😂
Thanks for the great video again. Support 💯💯
I’m a hub motor lover now 💜
Thank you for watching and supporting! 🤜🤛
Is the wheelie really immediate like mid-drive? I don’t think so
@StangGT550 no it’s not. Not with this set up.
Always dropping good content 👍😎
BTW a test ride on Voltron testing grounds is worth a plane ticket to TX from Maryland lol💯😂😉🫡.
Hahaha! ✈️
@@VoltronWatts 🤣😇☝🏽💯
How are you doing, bro? I look up your watch your videos all the time I like your different Bike builds. And how informative you are on the pit bikes anyways I have a question. I have a Tuttio sole 1 , I was wondering if you think I could get like a 3000 W 5000 W hub motor kit to put in that bike and is there any certain measurements I need to make the wheel fit? I see social has a few a bunch of companies have a few hot motors 12 inch. Do you think the stock 48 V battery would work with a kit or do you think I’m better off buying like that mini controller that electro and co. What do you think I should use a direct drive motor kit would that battery be able to handle it? I do have a 72 V /30ah battery that goes into a Surron or Talaria but I don’t think that will fit in the chassis of that bike. Any feedback on hooking that bike up I I don’t wanna spend a whole lot. I know some of those kids you can get from say AliExpress Alibaba like ocean and other makes a pretty reasonable on the bank. Please let me know your thoughts.
Thanks for watching man! If I were you, I would join the modified razors for adults Facebook page. A ton of info there 👌
I need one of those stickers 😂😂was wondering how many amps are you running the full 240?
I’m having the stickers made. I’ll let post a community update here and on my Facebook page when they are available 🫡
Ppl say electric motorcycles will never take off for a lot of reasons.
The real reason is that people are building stuff like this, so there is no point in dropping 8k on a kawasaki ninja with 3kwh of battery that goes the same speed haha
Thank you for watching and commenting! 🫡
What exact controller and throttle did you use?
Sotion controller and throttle
Lean forward weight less or more biger super Moto wheels
For sure! I have a matching 12” wheel coming right meow
So the pegs are attached to the swing arm? There’s not much you can do with that chassis, but that’s a pretty stupid design.
Well, the deign isn’t sotions fault. That’s a razor issue. You can get this hub motor kit to fit in a SX or MX razor frame as well 🫡
Dragy results for all your bikes 0 to 60mph or 0 to 30mph
Hahaha! 😂
Please do a giveaway
lol!! 😂
Send me or sell me the front wheel, I need it. Thanks
I need it too! 😆
I thought you getting a new front wheel?
@alfredyap8397 I did. It just got here yesterday. I posted some pics of it on my FN page yesterday
If you were about to really lose it, no words would come out. The fact that you were still talking means you were just at stage 1 of a crash. At least for me, if I'm about to crash, I just brace for it without a sound. Then, afterwards, I make a sound that is awfully similar to what it sounds like when I'm taking a shit.
Cool man
He does not fit on that tiny ass bike.
Wrong! 😂 i kinda fit but the smaller the more fun!