I wish that I would have found this video sooner. Was having the same issue, so i towed my Accord to the Honda dealership. First thing they done was replace the PCM for $2000. Then they replaced the IMA motor controller. I provided the motor controller. Dealership wanted $2800 for a new one, but bought one on Ebay for $49 bucks. Dealer called to let me know that I could pickup my 07 Accord. Get there and the car would not start. Nothing has changed. Honda mechanic told me that they could no figure out the crank, no start issue, but their cost was $2700. I paid and walked away shaking my head. They finally got the car to start after 30 minutes of attempts at the dealership. I drive the car home and thought, maybe someone on RUclips has had the same issue. I found this video, viewed, walked out to my car pressed the ignition relay and my car started 1st try. Thanks for the video and IT's FREE.
Mannnnn! Awesome video turn out this was my problem as well. Didn’t replace the ECU seeing I didn’t want to go that far, but I noticed no spark and went straight to the relay and once I moved it around. Car started straight up! Replaced the relay helped as well
I gotta admit that was somthing to see.. though my car may not b that exact problem based off your work I now have something to check on mine... thank you vide was interesting...
I’m having trouble getting my 02 2.4 started as well . No spark . And I hooked the computer to it but no codes ? I’m not sure what’s going on with it all the fuse under the hood seem to be good so I guess I’ll try to make a jumper wire as well and see if it will start
Cold solder joints! Take the relay out of the car. Then take it apart go out in Sunlight and look at the joints you will discover the solder joints are bad.
![[DOKKAN BATTLE] Worldwide Campaign Announcement Video Part 2!](http://i.ytimg.com/vi/JpT5Voak6WA/mqdefault.jpg)
I wish that I would have found this video sooner. Was having the same issue, so i towed my Accord to the Honda dealership. First thing they done was replace the PCM for $2000. Then they replaced the IMA motor controller. I provided the motor controller. Dealership wanted $2800 for a new one, but bought one on Ebay for $49 bucks. Dealer called to let me know that I could pickup my 07 Accord. Get there and the car would not start. Nothing has changed. Honda mechanic told me that they could no figure out the crank, no start issue, but their cost was $2700. I paid and walked away shaking my head. They finally got the car to start after 30 minutes of attempts at the dealership. I drive the car home and thought, maybe someone on RUclips has had the same issue. I found this video, viewed, walked out to my car pressed the ignition relay and my car started 1st try. Thanks for the video and IT's FREE.
Mannnnn! Awesome video turn out this was my problem as well. Didn’t replace the ECU seeing I didn’t want to go that far, but I noticed no spark and went straight to the relay and once I moved it around. Car started straight up! Replaced the relay helped as well
Thank You for your help man. I’m sure you have helped out lots of people thanks to your hard dedicated work!! Keep it up
I gotta admit that was somthing to see.. though my car may not b that exact problem based off your work I now have something to check on mine... thank you vide was interesting...
Pretty Good Advice !!!
Thx
Where can I find free schematics?
Quick question.
I just bout a 05 2.4 accord, when the car is on and you open the oil fill cap, air is pulsating out,
Is that normal?
Thanks
Depends on the type of engine, but yes, most of the time it's normal or there is blow by the pistons.
I’m having trouble getting my 02 2.4 started as well . No spark . And I hooked the computer to it but no codes ? I’m not sure what’s going on with it all the fuse under the hood seem to be good so I guess I’ll try to make a jumper wire as well and see if it will start
Did you get it start? If yes, how?
Please help a brother out...
Stranded with same symptoms here
The replacement from dealer are Denso but the original ones are Matsuba is that normal. My fuel pump relay is bad but I can't find the original one
Cold solder joints! Take the relay out of the car. Then take it apart go out in
Sunlight and look at the joints you will discover the solder joints are bad.
That matsubas are faulty from matsuba denso you need
Gracias
Te sirvio??