I have isuues with my W211,when I repaced my ABS sensor ring,the handbrake cable couldn't fit back so I left it handing and my car failed MOT bevause of this,I was stuck and now I have a clue to fix it and this video jas brought light and I will save upto £200+Thanks very much sir
Thank you, with your guidance I was able to free and lubricate the parking brake on my 2008 CLC 220. Beforehand it was necessary to raise the pedal by using my toe behind but no longer. Keep up the good work (from Steve in the NW of England)
Thank you so much, I just fixed my coupe in 20 minutes despite the lack of space getting to it on a 2 door. A couple of sockets, a screwdriver to loosen it off and a good soaking with WD40 and its sorted. Thats one rip off I won't be experiencing at the garage. A million thanks
Thank you so much for this. My parking brake hasn’t been working and with you showing the easy access to the splitter enabled a simple diagnosis of the fault of mine. Thankfully, for me, it was merely the cable in the front had popped out...
Thanks Friend, I have a 1984 300d that I heard that spring break. I think I have to get under the car (maybe raised a bit to wedge my not so thin self under) to verify. I always enjoy your videos. I already tried the tightening of the star screws accessed at the rear wheels for the emergency cable to each wheel, but no joy. Keep up the wonderful work. If you see Kent Bergsma, please give him a three finger salute for me... :).
Thanks soo much for sharing this!! It was really instructive. Im just figuring out whats the problem with the parking brake on my CLK 2003, and I guess the construction is similar...
I have 2008 E280 CDI Sport 4-door E211 and this middle panel is not under the back seat. The two circular one's are but not the middle one nor is it under the boot liner in the boot.
Wow that was nice instructional video and yes I am hopping for new one how can we replace this broken part. As always very educational and entertaining , thank you
Hi, I have a 2004 S500 4Matic and the parking brake handle is stuck in the open position. Any suggestions on how to fix this issue? Any input is appreciated.
Any lubricant will help lube once it moves, I buy whatever is on sale, and spray fluid film rustproofing to help stop rust on vehicles I bring east to the salt belt from dry western U.S.
What I'm working on now is my 2001 ML320, the emergency brake was only acting on the left wheel, then it stopped working completely, pedal to the floor! I thought my emergency brake shoes were worn, and the rotors gouged. But in fact the cable had come disconnected at the front above the drive shaft and exhaust system. So I'll try tackle reinstalling it today, and the emergency brakes are like brand new in the back, but what I was looking for was the tool to remove the ebrake U spring. What a struggle...
That's interesting. Shouldn't there be a plate or something below that mechanism in the C? On my w208, the whole assembly is on the inside and not accessible at all from below. There is a small cover plate on top. Looks like without a bottom cover, that space would get pelted with grime and water from below.
I own E- class had problems with cable , I had take handle apart rerun cable so it would work properly not a big deal but really it’s bad engineering on manufacturing side
This is a common fault on mercedes cars of this era because there is a hole under the cable junction that exposes it to the weather elements over time it locks up my merc clk 240 was the same
I have w209 and I just checked this system, mine is stuck kn release. Spraying everything with wd40 and tomorrow is going to be a big day for maintaining my car since tehnical inspection day is coming quickly
I hate this kind of parking brake it is so useless and so many points of it to fail it just causes more problems i got it with the handle to release it is just not working so if you put the parking brake on it will not come off why did Mercedes not just use a normal parking brake or even electric one as that does not have as much problems as this stupid one does.
Thank you, your video is the only real solution of this parking brake release problem.
I have isuues with my W211,when I repaced my ABS sensor ring,the handbrake cable couldn't fit back so I left it handing and my car failed MOT bevause of this,I was stuck and now I have a clue to fix it and this video jas brought light and I will save upto £200+Thanks very much sir
Thank you, with your guidance I was able to free and lubricate the parking brake on my 2008 CLC 220. Beforehand it was necessary to raise the pedal by using my toe behind but no longer. Keep up the good work (from Steve in the NW of England)
Thank you so much, I just fixed my coupe in 20 minutes despite the lack of space getting to it on a 2 door. A couple of sockets, a screwdriver to loosen it off and a good soaking with WD40 and its sorted. Thats one rip off I won't be experiencing at the garage. A million thanks
Miranda Lewis I have the same problem with my Mercedes 2003 Ml 320, please show me how to fix or replace. Thanks
Thank you so much for this.
My parking brake hasn’t been working and with you showing the easy access to the splitter enabled a simple diagnosis of the fault of mine.
Thankfully, for me, it was merely the cable in the front had popped out...
Most of garages are more clueless than customers are. It goes for MB too. Nice fix, mate. My brake is clogging too. Time for open dissection.
Thanks Friend, I have a 1984 300d that I heard that spring break. I think I have to get under the car (maybe raised a bit to wedge my not so thin self under) to verify. I always enjoy your videos. I already tried the tightening of the star screws accessed at the rear wheels for the emergency cable to each wheel, but no joy. Keep up the wonderful work. If you see Kent Bergsma, please give him a three finger salute for me... :).
I meant to say one finger salute, but the three finger (cntrl-alt-delete) is just as good :). Thank you for sharing and not selling your information!
Sir, thanks so much for showing where the fulcrum and 2 to 1 splitter was.....
Thanks soo much for sharing this!! It was really instructive. Im just figuring out whats the problem with the parking brake on my CLK 2003, and I guess the construction is similar...
Thanx you friend. Brilliant video, i hope the E class-W211 is in the same place.
Really useful video.
Do you know if I can access the cable under the rear seat of a 2015 eclass?
It's a right hand drive.
thanks.
I have 2008 E280 CDI Sport 4-door E211 and this middle panel is not under the back seat. The two circular one's are but not the middle one nor is it under the boot liner in the boot.
Wow that was nice instructional video and yes I am hopping for new one how can we replace this broken part. As always very educational and entertaining , thank you
you are welcome….
Thank you for the video i was wondering how to remove the cable for the hub so i can replace all the best you keep up the work 😎👍💯
Thank you for this, it's the exact same problem on my 2007 mod. 🙏
I wana adjustment park brake w204 is same place as video 1:33 ?
This was a lifesaver, I'm not mechanically inclined but I figured what the hell and saved myself $200 or so
When i went to adjust it, i put spanner on adjusting nut and it SHEERED OFF !!
So going to try and remove whole assembly and see what i can do ??
Thanks you.. You made it looked so simple and easy..
Hi, I have a 2004 S500 4Matic and the parking brake handle is stuck in the open position. Any suggestions on how to fix this issue? Any input is appreciated.
Will this work on a 1998 E320 gasoline?
Any lubricant will help lube once it moves, I buy whatever is on sale, and spray fluid film rustproofing to help stop rust on vehicles I bring east to the salt belt from dry western U.S.
What I'm working on now is my 2001 ML320, the emergency brake was only acting on the left wheel, then it stopped working completely, pedal to the floor! I thought my emergency brake shoes were worn, and the rotors gouged. But in fact the cable had come disconnected at the front above the drive shaft and exhaust system. So I'll try tackle reinstalling it today, and the emergency brakes are like brand new in the back, but what I was looking for was the tool to remove the ebrake U spring. What a struggle...
Ihave Benzi E320 HAND BRAKE IS LOOSE CAN NOT RELEASE
ok, thanks ...but now what needs to be replaced???..you left off with the cables going to each rear assembly. 2005 c 240
Great informative video. Thanks!
That's interesting. Shouldn't there be a plate or something below that mechanism in the C? On my w208, the whole assembly is on the inside and not accessible at all from below. There is a small cover plate on top. Looks like without a bottom cover, that space would get pelted with grime and water from below.
I own E- class had problems with cable , I had take handle apart rerun cable so it would work properly not a big deal but really it’s bad engineering on manufacturing side
Can you help me? My brake lights stays on when I'm driving and doesn't turn off. What do I do?
Thank you so very much, you are a blessing!!
brilliant! thank you for uploading. my spring is broken too. What spring did you replace it with? Did you try replacing the original spring.
This is a common fault on mercedes cars of this era because there is a hole under the cable junction that exposes it to the weather elements over time it locks up my merc clk 240 was the same
I don't believe those do much, if anything. So many folks think they work magic, I don't!
I have w209 and I just checked this system, mine is stuck kn release. Spraying everything with wd40 and tomorrow is going to be a big day for maintaining my car since tehnical inspection day is coming quickly
Awesome instruction! Thank you!
you are welcome….
Thank you...lovely video! Regards
I have same issue with my E-Class w211..
watch Part 2.....Lube It !
thanks for sharing
I hate this kind of parking brake it is so useless and so many points of it to fail it just causes more problems i got it with the handle to release it is just not working so if you put the parking brake on it will not come off why did Mercedes not just use a normal parking brake or even electric one as that does not have as much problems as this stupid one does.
Good very good
I love you
A rubbish design and always gives trouble Merc could have done better