3 Transistors|| LED chaser with speed controller DIY Rs-50
HTML-код
- Опубликовано: 18 ноя 2024
- Thanks for watching, Have a great day !
Component list:
3 pcs NPN transistors; C/S9013 or BC547, You can use any other NPN transistor (but You have pay attention into EBC pin sositions).
15 pcs or more 3v LED bulbs.
4 pcs Elco 100uF/16v.
4 pcs 4K7 Resistors.
3 pcs 560 ohm Resistors.
10K Potensiometer.
#DIY #Homemade #RunningLED #LedChaser #Electronic
---------------------------------------------------------------
hy welcome my youtube channel TECHNOLOGY SADDAM
About this video-
friends following me -----
RUclips- / @technologysaddam
Instagram- / saddamhaldar97488
Fecebook- / sahin.saddam.758
Twitter- / saddam19145006
Nice sir व्हिडीअो अच्छा लगा सर
Idea accha hai par sound hota to aur bhi accha hota
Beautiful ! Nice Light. Stay Happy .
Doing Step by Step..
Thank you, I will
बहुत अच्छा है और एक बात यदि हमें ये चेसरतीनचेनल खरीदने के लिए कौनसी जगह का कोन टेक करना चाहिए ये भी बताइये
Beautiful work author of the video
Hugs from Brazilian here
Thank you very much!
Very nice view and good ceen this cerckit i
Thanks for watching
A schematic would make this a lot easier to follow
It's always good to post a circuit diagram or schematic
0
Your project very nice but it cannot be easy for new man so I suggest you please give circuit diagram
Nice u so happy for viedo 😊😊😁
'
very good LED electronic project at home
Very nice and beautiful. Thank you for letting me know more about it
Thanks for watching!
Sir if I add more sections can I turn this into a 6 or 8 channel chaser unit? I'd like to build this for some holiday lights. Thank you for your post and attention.
yes
Adele a 9 components kiss
Pls send this to my address
Hi great video but have you made a single LED strip with a chase from end to end?
２０年以上前に、この位のコンデンサーを＋−逆につないで爆発させたことがあった。
それにしてもこの作者、取扱説明書見ないで組み立てているのはすごいわ。トランジスタなんぞ働きがよくわからない（笑）。
Finally i make circuit diagram. Its working.
Hi, this vedio is very good.
Thank you very much
Nice work what is the volt of the battery you include
I think he use 6v battery
Hello, your ideas are beautiful
How to make a LED chaser circuit for a large number of LEDs, for example 500???
Can you show this circuit diagram??
For better understanding
Beautiful soldering work 👌
I like it, no breadboard required!
Well done but can u put a link the the schematics for both boards plz
Congratulations for 1.2 m views 👏👏👏
thanks
Very very very good for your xperemant I like for your xperemant plus making for music sistim car
No podes mostrar graficamente el circuito? Muchas gracias
Oooo ho nice video
Super experiment
Good job sir
Thanks
fadli
What this man this is a very very good to you your are very good mass
thanks bro
Hola excelente el proyecto. Pregunta se puede usar con una corriente de 24v a este circuito?
Will only 24 lights light up in this or can we add more lights? What to do if you want to add more light in such a process
This works well with 3 LED's. I need 4 so it looks like a rotating beacon. If I add one more section to do 4 instead of 3, it flashes alternatively - 1&3 together, 2&4 together. Is there any way to modify to get 4 running like the 3?
Me iska use mini drone ko speed controller ke use kar sakta hu kya
If I use 5 pc led here then it's works or not or 100uf 25v
super
560 ohm resistor watts
Bhi isme 120uf 16 volt ka chl jayga
Very good
the driagrama ?
i,d really like the music bcoz i will say “meow” what is music #2 on your video?
This is basically an astable multivibrator (alternating indicators) with a third stage added. It's simple.
Very good 👍
Dhere dhere video bnaya kro bhai
How much maximum led used in cirkit
I can't see the type number of the transistors. Are those BJT's, or MOSFET's? I love the variable speed. this could be a crude 3 phase driver for a variable frequency drive, for electric motors.
These are simple BJTs in a 3-stage astable multivibrator. It's not usable as a Motor driver, because the ON-Time of each stage is definetly not exactly the same. The component values are too imprecise for that. There are too many specimen variations. Sometimes this circuit can start freezed (one stage permanently on), then it needs a kickstart or restart to start oscillating.
@@djblackarrow I did try it, but I had to capacitor-couple the motor, to keep the DC bias off the stator. ANY DC on an induction motor has a plug-braking effect, causing it to run inefficiently, if even at all. You are right. I found, that the frequency span is quite limited. The duty cycle on each output varies, with bias resistor current, which is what defines the maximum available frequency, based on the size of the coupling capacitors. It's still a fascinating circuit. If nothing else, I got some pretty good ideas experimenting with it.(I used 2N3904 transistors) The most interesting thing about this, was connecting the LED's anti-parallel to the emitter-collector junctions of the transistors, rather than in series with the load resistors. I think that shunt regulation is why the frequency varies as well as it does.
Great .
Can you please share scheme?
Can i connect it to 12v adapter
super video.............
creative and very useful
Thanks a lot
thanks again😁, making the tutorial channel turned out to be difficult😅, for all those who don't mind giving feedback, I'll wait okay😊
Is this functional modern art? I have to say I would be more open to modern art if it was!
I agree schematic Orr part list at the least would help understand it more. .v
Nice😎😎
Excellent 👌👌👍👍
Thank you! Cheers!
Kon Kon se it componet lgaye h
Description diya he chake karlo
Can I use 1000uf/25v capacitor
It is possible
Excellent project but difficult to understand without a circuit scheme
Adolfo Blasco
Very Good choice
Kitne blub ka circuit bna sktey hai bhai is pr
How long is the shelf life?
Great project 👍
Thanks 👍
Buena tarde, con el transistor S9014 se puede hacer el circuito, gracias y bendiciones
CLARO QUE SI
Hi, friend video is very nice and absolutely complete information about to make the lighting. Plz tell me how I can run it on 220v .a c tell me circuit diagram. Thanks
You need down converter for that
Nice Bhai 👍👍👌👍
Can we connect any ohm resistor. Like 1k ?
Good
what is the name of LED kit
Good idea bro keep it up
Thank you, I will
What i remove or replace when i use led cob 12v from accu,interest for stop lamp
لا؟!
ليش هيج انا هوجان
Good morning
Sir u have used 8 led per channel can i increse led to 15 led per channel
Would it work if i skip the potentiometer
Nice!!! Вы,конечно же, молодцы,что показываете такие вещи!... Но очень жаль,что не отвечаете на комментарии...
@technology saddam, where is the circuit? Don't tell me it is ok to following the movie, bucause it is impossible!
Agar 5 clour lgay ge to sarkit badi karna padegi kiy
Yeh wala vero board konsi site pe milega?
Sir usme 9013/bc547 ak transistor par kitni led laga sakte he
Post circuit diagram, with all those shaking, can't understand what u r doing.
Kitna volt ka batri ha
Video is good but speed and clearly not visible
Good morning
Am I make the led rise by this circuit so the light effect is slower. Why brother
Any components value increase or decrease.
So that is problem
Super
What are the transistors
Can I replace the lamps with a 12volt lamps??
And operate this circult at 12volts
Ye circut kitne led tak kam kr sakta hae matkb 1000 led tk ????
Sir is cirkit me maximum Kitna led jod sakte hai
itu mengunakan transisto apa aja mas
এইরকম ১০ প্রকার খেলোনো কি আইছি করতে হবে...?
Is there any technique to make led glow one by one?
What is the value of 4k7 resistance?
Quter wait
Gan saya bikin led strip yg di sambung ke speaker tpi pengaruh ke suara jdi kecil plus pecah, itu gmn ya solusinya ?
Salah server bos 🤣
Sir i want to learn this technique
Which course i have to do
Please help me.
Basic electronics
Very nice...
thanks
Hello, can you give me the diagram?? Plis?
How much led should we connect in 1 channel please reply me urgently
Brother can we use 100uF/25v capacitor ?
Yes
video good but poor sound
Is it BC547 you are using?
Awesome
Maja as Gaya sir g