@@sarveshtheinventer6988 I think you should increase the value of capacitor but you might be able to use same transistor. Please check datasheet of that transistor to obtain it's max volt handle
for those who want to know all the components that were used in the video: 1- Color led 2- Resistor 430 ohm 3- Diode 1n4148 4- Capacitor 25v 100uf 5- diose 1n4001 Hope this helps (◍•ᴗ•◍) Fala aí galera do Brasil, espero ter ajudado tbm 🇧🇷 (☞ ಠ_ಠ)☞
Next one you make needs to filter the high mid and low range one for each channel!! Wouldnt be to hard, just need to isolate frequency / filter it and then use that new signal for one of the 3 LED channels, Either way cool build!
too much bass. not that that is a bad thing. A nice, simple IC free solution, though it looks like the red LEDs aren't getting enough current. That, or they are just really, really dim compared to the other LEDs. That circuit diagram helped to force me to realize the purpose of all those 1N4148 diodes as I was wondering where the IC or extension wires where when you began to seal the box. Nice build.
why is mine insensitive like that ..? when the song is playing the lights only turn on at the beginning, after arriving in the middle of the song the lights are no longer lit. does the amplifier also have an effect?
Mantap gan lebih simpel dan kuat TDK ada komponen yg mudah rusak❤
One question, if im using 200 led for that same project, Can i use the same transistor and capacitor ?
SAME, but I want to use 500 LEDs
Yet No answer fron the owner of this channel.
@@sarveshtheinventer6988 I think you should increase the value of capacitor but you might be able to use same transistor. Please check datasheet of that transistor to obtain it's max volt handle
Hi were are you from
I want this led light you can send me I will pay amount
No
I thought my phone speakers gone!!! 😂😂😂😂😂😂😂
for those who want to know all the components that were used in the video:
1- Color led
2- Resistor 430 ohm
3- Diode 1n4148
4- Capacitor 25v 100uf
5- diose 1n4001
Hope this helps (◍•ᴗ•◍)
Fala aí galera do Brasil, espero ter ajudado tbm 🇧🇷
(☞ ಠ_ಠ)☞
Kiero el diagrama también
Thanks
Hi goodday what if im using 12v as power supply what will be the capacitor and the resistor
Mantab sekali makasih atas ilmunya semoga sehat -sehat selalu banyak rezeki nya
That's a simple design, if you add a 2way or 3 way crossover and divide the LED tower the lights would respond to frequency not just volume
yes correct ... i have one that expands till 8 band ... but involves opamps and comparators
Sir plz reply me plz sir can i use 1k resistence in this project plz reply me because I haven't 450ohm resistence plz reply me sir
Question: would a 430 ohms but 1/2Watts will do? Thank!
Bahut badia bhai ya ma bji bana chata tha magar nahi bana paya
Give all required material name
Nice thinking and creation ✌️
can this circuit use for 100W Amplifier .?
i was thinking if you did that in a transparent box.. it would look more eye catching. but this i will build. thanks for sharing
Next one you make needs to filter the high mid and low range one for each channel!!
Wouldnt be to hard, just need to isolate frequency / filter it and then use that new signal for one of the 3 LED channels,
Either way cool build!
Great video.. are you using pam8610 amplifier with that speaker??
Brilliant Idea, simple without many components. You have the diagram.
7:25
too much bass. not that that is a bad thing. A nice, simple IC free solution, though it looks like the red LEDs aren't getting enough current. That, or they are just really, really dim compared to the other LEDs. That circuit diagram helped to force me to realize the purpose of all those 1N4148 diodes as I was wondering where the IC or extension wires where when you began to seal the box. Nice build.
can it support a 5v amplifier?
I would appreciate your responses.
Yes
Hey can you tell me which board are you using
Sir ydi hme led aur jyada lagana hi to kaun sa capacitor aur doid lgega
Hlw Bro what are you using for speaker sound connection plz tell me i am making this project for my college plz tell me
Buat wadah lampu nya pake bahan apa itu kak?
If okay when the resistor i ised is 470ohms and capacitor is 470uf16v ??
i want to know if i can make this bigger to vew the full spectrum
Ide kreatif brylian,mantab👍
Very Very Good My feried
Kalau amplifer menggunakan 24 v apakah masih sama..?
430ohms resistor and 1N4001 diode not available in stores they have only 390ohms resistor and 1N4007 diodes can i make use these components
can that led tower be used for other volts in the amplifier or can only be used for 7.4 volts?
Kitne watt ki sound sah sakta he
I make it...
it's awesome
Thanks
Miếng màu trắng đó gọi là gì và mua ở đâu v chỗ mk k có bán
Sir Esme kya kya lgha hai mujhe bataye sir our konsha transister lgha hai
How many watts was your speakers?
did you use styrofoam for making your tower?
How u connected the led, in series or parallel
Is this support to 5v amplifier?
Plzz reply for me........
Nice video
Siang mas,maaf mas mau tanya klo speker nya yang pake ampli kuat gx mas lampu nya putus gx ,mksih
Wow sangat kreatif sekali ya gaes,, 👏👏
Mantap lamfu lid nya bisa ngkutin suara musiknya
Creative brother, thank
आपका धन्यवाद , मैने बनाया लेकिन minimum आवाज पर लाईट लागते नही इसके लिये क्या करे
Hum ise home theater ke speaker pe jod skte hai kya
Home theater m lga skte hai kya
Can it be connected to speaker runs with 220 v ac?
Can you please show us how you made that amplifier circuit?
Mil respetos bro" este es el video que siempre busque gracias bro ahora si me suscribo a tu canal por hacer un buen trabajo
Yo igual!
Todo simple hasta q llego a ese pequeño amplificafor... Donde se consigue eso?
X2 jaja muy buenoo
@@leocolemam9201 busca en Internet pam 8610 es un amplificador de 15w ×2 o 30w bueno y barato
Sayang tidak ada penjelasannya disetiap langkahnya😝
Sirve conectado a un parlante de auto ?
Aapne kon say LED tar ko fold keya ha +/- 😅😅😅😅😅
Hi, i made vu meter exactly like this but only 3 of the leds lights up. I used 12×3 leds. What's the problem? Should i use more powerfull capacitors?
Just tell me on thing in led witch terminal ( +possitive aur negetive- ) you can add resistor..?
bhai ye sab market mil jayenge
O dada kya lovely tiks dikhae hai aapne jabab nahin eaise hi item upload aap karte rahiea
Bro can it work with small speakers
Can I use it for my bass??(20watts 4ohms)🙏🙏🙏🙏🙏🙏🙌🙌🙌
No need Volt power? Just connect into the speaker?
an amplifier delivers electrical current to power the speaker. On mine I have 16 volts for example;)
Can I ask for your schematic diagram of the amplifier circuit?
Can I use without amplifier in my speaker??
What are the kit elements name tell me please bro.
Please tell me
They are all in the video as a description
Hey can i use another diode which one ?
Can you do same thing with pixel?
Max how many bulbs💡 I can add in one row???? Please answer, dear admin
Cool idea 💡 but it’s without code???
is it possible for a 5 volt mini amplifier?
Nice bro
Se eu não tiver o resistor de 430 ohms Qual o resistor posso botar no lugar
Me gusto y ya lo hice....
Very nice
why is mine insensitive like that ..? when the song is playing the lights only turn on at the beginning, after arriving in the middle of the song the lights are no longer lit. does the amplifier also have an effect?
Can I use 1k ohm Resistor For this Project
Hey, ICV creative can you give purchase link of 7.4v cricute?.
Bhai kitna volt sa start j ya led volume chaser
NICE VIDEO
Sir can we use 340ohm resistor
Ya Kon sa amplifier card use Kiya ho please reply me
Boa noite família abençoada Td bem gostei dos seus vedeo nota 1000 eu quero um
Is the leds still lights up if the speaker is in low volume?
How did you calculate what resistor to use?
Good job
Maine banaya hu konse curkit se chalega
20 light ka hi banaya hu
Can we use 180 ohm resistor
Answers please
Can u tell me about the amplifier circuit or which component u use as a amplifier ?
CA-8610
Wie der Verstärker einfach übersteuert 😂
6*12 led lights have connected how much volt capacitor and resistor I have to use pls tell me sir
How many leds we can used
Can I use it foe subwoofer 20watts4ohm?
Please reply
Yes your can use
@@icvcreative7146 thnaks bro
Una pregunta se puede hacer lo mismo pero que funcione con micrófono ?
Hello, excuse me, does anyone know what colors of LEDs I use?
Can I Use Mic To Detect The Sound?. Please Reply🙏
Does it reduce the speaker volume?
Will it work if I don't use 430 ohm resistor
Aur kitna ohm ka resistor use kare
How to connect a mic
Can you give circuit working explanation.
Nice 👍
Is it will work on 400 watt amplifier??
Sirf speeker ke voltage se chalega
Bhai ye aap sale kar sakte ho
Nice🇵🇰👍
Kalau tegangannya 24v boleh?
Bhai kitne din ho Gaye Kam karte in4007 HOTA hai daiboard in4001 Nahi ok
normally how too's have a list of parts?