Great video man! I'd say this is an outstanding light! The AdvanBlack light is hitting all the boxes, except sequential. It's SO good that you can overlook that. Picking out lights is tough because what it looks like in a picture, video, or on a display at the dealer is a little different than what you see when you finally get it on your bike. Sometimes you have to give it some time to marinate how much you like it or what parts you don't like as much. On the subject of the CustomDynamic lights not matching, I don't think that's an issue. Since the AB light disappears into the tour pak, it doesn't draw your attention to a mismatch, it just disappears. Of course this is one of those things that you decide later after installing it and looking at it from different points of view over a couple weeks. I really like your setup. It's super clean. Fillers, tail light, Tour pak and TP arms. I have the same bike with the Harley TP light. The only disappointment is it being so dim a running light during the high sunlight of the day. Other than that, it looks awesome. In addition to that, I have the same smoked CD Tail, tour pak arms, and Fillers. I also have CD BAGS sequential saddlebag lights, and high mount tour pak light, CD latch lights, and Ciro machete saddlebag led lights. Yep, it's lit up man! No doubt about it! I just had the install so I'm giving it a few weeks to see if I still like it or want to change. I'll say this, since everything is so bright now, the dim run light on the Harley TP doesn't standout to me as much now. Funny how that works.
I installed my Advanblack tail light in smoke lens on my 2007 Harley Davidson Custom Fatboy Trike, on the chopped tour pack. I must now adapt the wiring harness to work with my lighting system.
I just came across your channel recently and subscribed. I am happy to support a fellow moto content creator. Great video. Looks like a very nice light option. Ride safe 👍👊🇺🇸
I have a 2019 FLHTK. Tried the CD tour pak light. It would not line up with the factory holes. It has a raised lip around its harness connector and was about 1/16 of an inch off and would not sit flush to the pak. Returned it. Have the Harley light you have on it now. I like the sequential signals. However I notice the magic strobe screws them up when strobing. So I have it on a 4x flash pattern. I wish the running light was brighter on the Harley. This looks nice. Not sure I like the signals though.
The turns are growing on me. I think the difference with the light CD smoke and the Advanblack darkness would set off my OCD. I’d prob get used to that too. You could night shade your CD lights but I think you’d lose light output. Especially during the day. I night shaded my front fender tip light and it does reduce the brightness. I like the Harley light. Your install video on it was one of the reasons I bought it. I installed it in the evening in my garage and thought it looked great. Next morning brought it outside and thought the light went bad. The running light really gets washed out in sunlight. The brake and turns are bright regardless of light conditions just the running needs some help. I’d like to see the Advanblack light on outside in the sun. Any issues with it lining up to the factory holes? Any raised lip around its electrical connector that might interfere with it fitting?
@@ronbartell7151 it fit just as good as stock. I didnt have any problems with holes lining up or anything. I've used that night shade on other products. I'm not a fan of the night shade. I've been looking at the dominator rear fender from Advanblack. It comes with SMOKED cvo style lights. So that might be the solution I need. Lol. Thanks for the input and support. I'm sure u will see the Advanblack tour pak light in the sun when I do other videos. I plan on doing some ride videos also.
I just had my tour pak put on with the rack and my heart sinks about drilling holes into it after spending 1500 dong to get it. I don't know if any good light makers are out there who can add this kind of thing without putting holes into it. I just can't bring myself to do it, but maybe after I while I'll soften up. I don't know.
Hi, do you know if this light requires BCM for the brake light function? Harley light only does running/turn signals without BCM, the one from Custom Dynamics is fully functional without BCM, what about this one?
@@IotaMan357 Did u go back with Harley or did you keep the AVB…. I just installed that Harley from watching your earlier video and Man that baby is niceeeeeeee and clean…. 😎
I really like the styling, and the smoked color blends right into the tour pak. very nice!
It is a very nice light. Advanblack killed it with this light...
Glad to see you back. Honestly, I really like both lights but the Advanblack light does look great when it’s off. Love that dark look.
Thank. U.
I really like how dark it is.
Love the dark look of the new light. Still love the Harley light too. Great video. Good to see you back.
@@Preachermotoman thanks buddy. How u doin?
@@blackedoutbandit doing good. Hoping to get back to producing doing me content real soon. I enjoyed your vid. Always do.
Great video man! I'd say this is an outstanding light! The AdvanBlack light is hitting all the boxes, except sequential. It's SO good that you can overlook that. Picking out lights is tough because what it looks like in a picture, video, or on a display at the dealer is a little different than what you see when you finally get it on your bike. Sometimes you have to give it some time to marinate how much you like it or what parts you don't like as much. On the subject of the CustomDynamic lights not matching, I don't think that's an issue. Since the AB light disappears into the tour pak, it doesn't draw your attention to a mismatch, it just disappears. Of course this is one of those things that you decide later after installing it and looking at it from different points of view over a couple weeks. I really like your setup. It's super clean. Fillers, tail light, Tour pak and TP arms. I have the same bike with the Harley TP light. The only disappointment is it being so dim a running light during the high sunlight of the day. Other than that, it looks awesome. In addition to that, I have the same smoked CD Tail, tour pak arms, and Fillers. I also have CD BAGS sequential saddlebag lights, and high mount tour pak light, CD latch lights, and Ciro machete saddlebag led lights. Yep, it's lit up man! No doubt about it! I just had the install so I'm giving it a few weeks to see if I still like it or want to change. I'll say this, since everything is so bright now, the dim run light on the Harley TP doesn't standout to me as much now. Funny how that works.
Thanks for your input. That's one thing about our bikes, they are always a work in progress.
@@tinman3505 You ain't wrong
@@tinman3505 ruclips.net/user/shortsSGVd32MAvHo
Yes, I do like it. Thank you for sharing
no problem thanks for the support..
I installed my Advanblack tail light in smoke lens on my 2007 Harley Davidson Custom Fatboy Trike, on the chopped tour pack. I must now adapt the wiring harness to work with my lighting system.
Nice
Great job on the video! I do like some aspects of the Advanblack better and some of the Harley light.
Me to. Thanks
I just came across your channel recently and subscribed. I am happy to support a fellow moto content creator. Great video. Looks like a very nice light option. Ride safe 👍👊🇺🇸
thank u for the support I'll do the same.
I was already a subscriber on your channel lol.
@@blackedoutbandit 👍👊🇺🇸
I have a 2019 FLHTK. Tried the CD tour pak light. It would not line up with the factory holes. It has a raised lip around its harness connector and was about 1/16 of an inch off and would not sit flush to the pak. Returned it. Have the Harley light you have on it now. I like the sequential signals. However I notice the magic strobe screws them up when strobing. So I have it on a 4x flash pattern. I wish the running light was brighter on the Harley. This looks nice. Not sure I like the signals though.
I wish it had sequential turns
The turns are growing on me. I think the difference with the light CD smoke and the Advanblack darkness would set off my OCD. I’d prob get used to that too. You could night shade your CD lights but I think you’d lose light output. Especially during the day. I night shaded my front fender tip light and it does reduce the brightness. I like the Harley light. Your install video on it was one of the reasons I bought it. I installed it in the evening in my garage and thought it looked great. Next morning brought it outside and thought the light went bad. The running light really gets washed out in sunlight. The brake and turns are bright regardless of light conditions just the running needs some help. I’d like to see the Advanblack light on outside in the sun. Any issues with it lining up to the factory holes? Any raised lip around its electrical connector that might interfere with it fitting?
@@ronbartell7151 it fit just as good as stock. I didnt have any problems with holes lining up or anything. I've used that night shade on other products. I'm not a fan of the night shade. I've been looking at the dominator rear fender from Advanblack. It comes with SMOKED cvo style lights. So that might be the solution I need. Lol. Thanks for the input and support. I'm sure u will see the Advanblack tour pak light in the sun when I do other videos. I plan on doing some ride videos also.
That limited is clean
Thank you.
Well they all match like I said before I like it. I want one .
Thanks
Looks good.
Thanks
This new led light is way better than HD . Really hope somebody will make 1 with yellow signals in the future 🇬🇧🇬🇧👍
send Advanblack a email. u never know what they could be working on.
Do you have to connect the ground that’s connected to the radio connector? Also, why do they include an antenna when they have no place to connect it?
I believe there is a place to connect it. Or u can use the shorty to relocate the antenna
I just had my tour pak put on with the rack and my heart sinks about drilling holes into it after spending 1500 dong to get it. I don't know if any good light makers are out there who can add this kind of thing without putting holes into it. I just can't bring myself to do it, but maybe after I while I'll soften up. I don't know.
I understand where u are coming from. Just remember the more light output u have the less chance u have at getting rear ended.
Wish I had some of your skills brother
I dont have skills. Lol I just jump head first into a project and hope it works out. Lmfao
Looks good
Thank you
Great video, just wish you had more lighting to see what your doing better.
Thanks for the input. I'll make sure to set up more lighting in the future
@@blackedoutbandit I bought a 3 sided LED light bulb for my garage Nd it's so bright
@@Rvbiker18 I've seen a lot of people use those. I know professional Monkey has some also.
@@blackedoutbandit they make it like so bright in the garage
I seen that. I'll have to get a few
Like your videos, keep up the good work. Are you interested in selling the Harley taillight with advanblack wiring harness and template?
Thanks. I'm going to keep the light for now anyway.
Hi, do you know if this light requires BCM for the brake light function? Harley light only does running/turn signals without BCM, the one from Custom Dynamics is fully functional without BCM, what about this one?
I'm pretty sure it dont need it.
@@blackedoutbandit This is me comparing Harley to CD light ruclips.net/video/iy0EvELcDz0/видео.html
so, what about those of us who use both antennas?
Probably have to use antenna relocation brackets.
I know it cost money but I think your tail lights should be blacked out like your tour pack. Your name is blacked out bandit. Like your videos
I agree. Thanks
I like it
Thanks Scott
I would stay with the harley davidson light it's a lot nicer looking light.
I like them both for different reasons lol
AVB looks good but Harley looks much better.
😊😊😊🤨
@@IotaMan357 Did u go back with Harley or did you keep the AVB…. I just installed that Harley from watching your earlier video and Man that baby is niceeeeeeee and clean…. 😎
I switch them up.
😀😀
They both look good. I do like the sequential of the Harley light. But I like the tint of the AVB light
i will take the hd light off your hands
I'm not sure what I'm going to do just yet.