I just ordered mine, can't wait to flex this on my brother who has every imaginable grill/smoker known to man! I had to have this based on the ridiculousness alone. Thanks Wesley.
Sweet frankfurter griller. The only improvement I see would be drilling the lower holes for the skewer holders smaller so the skewers don't slide all the way through.
The ONE issue I have with the design is that the poker tip makes contact with the table surface. It may just be me, but I don't like the idea of the one part that actually enters my food has made direct contact with whatever unclean table surface the unit in on (this may be a totally irrational thought, I get that). That being said, I love seeing the iterative process! And I always enjoy seeing your videos! Thanks!
Do the pieces require any clean up with a grinder when they come out of the plasma cutter, or do they come out with as clean edges as it looks like in the video? I enjoy all your projects.
I love it! What if the skewers were long enough to protrude through the other end of the Furter and there were skewer rests on each end which left the furter slightly elevated off the grill so they could be rotated/ rotisseried above the grill? Then one could go sit and spin on the furter burner.
This is just to cool. I would order one just to support your store. But it's so cool I'm going to have to order a few for gifts. Any way you could make one for say a new york strip for one or two?
Hey Wesley, just checking in. Love these videos of yours but haven’t seen anything new in a while. I hope all is well with you and I’m looking forward to seeing your next project. Take care.
I really like this product. I do have one question. Does it need to be wielded? I mean a little travel bag and small coal container. Cool idea you got these.
Hmm.... I've sent the link to the weld up version to a couple people as sly hints for x-mas. I've actually been looking at buying a small Japanese style grill, and this would fit the bill nicely. One recommendation: Build an accessory plate that has a wire mesh instead of the grill grate. Hmm, I'm thinking I might also add a couple little notches to the tabs that hold the grill plate, so I can use skewers. Satay anyone?
Might I add a suggestion? What if you came up with a way to cook a single steak with the same process? That would make someone living in an apartment and wants a steak, VIOLA, one steak on the grill.
Would you consider to sell stunt wieners too? xD And a corporation with Jimmy Diresta would be easy. You make the housing with your logo on the sides and Jimmy gets the grill plate with his logo. Maybe a product for other makers in general so that they could add there logo to it.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Best part is you could pop the grate off and use the skewers to roast marshmallows on the dying coals. Dinner and dessert all in one device!
Great idea! 🔥⬜
You are one person that looks forward to prototyping with an unbridled joy. I thoroughly enjoy the process myself.
"we ran it a few times" whew, this was one of the more challenging ones to get right, but the ends justified the means
Geeze Rich, you'd think you could plasma cut SOMETHING right ;)
I red that as "Metal Fabrication & Sausage" :-)
You should invest in your own laser cutter and a plasma cutter. They're very useful and a must for your business.
This is your DiResta ice pick or Giaco Maker Knife! A truly iconic product. Congratulations!
The twin roaster, banger toaster
The double heater meat-treater
The tandem tubesteak, roaster toaster
The dual banger heat stander
UHM.
Why is this the first time we've seen this lovely doggy!!
Her appearance fees are too high.
@@WesleyTreat Half the profits, I can see that.
Sweet design Wesley! I like how the non-weld version can break down for camping/travel.
Thanks!
BEST money you will ever spend I use ours all the time ESPECIALLY on the job site.
I was expecting the "stunt wieners" to be new skewers, wasnt disappointed either way!
Hmm, wiener-shaped wiener skewers. Should've thought of that!
awesome, just bought one. i love it when a random gift to a wife can lead to random unplanned adventures. thanks!
This is outstanding. Love the walkthrough of your iterations. Great video!
How can anyone not like this? A real treat - as ever!
Supporting TWO of my favorite makers at the same time? Sign me up!
Can't believe you only have 100k subs. I love your craftmanship, humor and editing! All the best from Holland.
I just ordered mine, can't wait to flex this on my brother who has every imaginable grill/smoker known to man! I had to have this based on the ridiculousness alone. Thanks Wesley.
Thanks! It should go out in the next couple of weeks or so! 👍🌭
I just take the MT2 chuck off of my drill press to use on my 1947 Shop Smith! Liked and shared!
Starting the video with a shot of you stroking your shaft... What a power play.
Excellent idea for selling the weld at home kit.
that's perfect for camping! what a beauty! cheers mate you're awesome!
I love this! Wonderful! I want one.
Dang. This is a three way. 🤣 Richard, Wesley and David. Didn’t see that coming. Fun project and design.
Also. The hair is getting pretty sweet Treat.
Don’t know why I haven’t seen your channel before, but totally enjoyed this video, great work.
Sweet frankfurter griller. The only improvement I see would be drilling the lower holes for the skewer holders smaller so the skewers don't slide all the way through.
Thought about it, but the holes would have to be well less than 1/8" wide and it would be fiddly to get them in there. 👍
Your videos are always a... wait for it... treat!
Really neat idea man. I also like seeing collaborations between a lot of RUclipsrs here lately
Excellent product.
Awesome film, nice story telling. Love how you captured design and prototyping. Product is killer. Mahalo for sharing! : )
The ONE issue I have with the design is that the poker tip makes contact with the table surface. It may just be me, but I don't like the idea of the one part that actually enters my food has made direct contact with whatever unclean table surface the unit in on (this may be a totally irrational thought, I get that). That being said, I love seeing the iterative process! And I always enjoy seeing your videos! Thanks!
You probably shouldn't look up what goes into a hot dog. 🌭
@@WesleyTreat comment of the day!
Just poke them into the fire for a few seconds to burn off those deadly germs
Thanks to the YT algorithms I only saw this today! Great work my man. 🤓
Woo! Order 29. Excited to assemble this kit. Love your stuff!
Ok I'm more excited for the hotdogs. But I really love hotdogs.
🌭🌭
I really enjoyed the evolution of an idea nice work i wish it well
Do the pieces require any clean up with a grinder when they come out of the plasma cutter, or do they come out with as clean edges as it looks like in the video? I enjoy all your projects.
Thanks! I believe 42Fab does a little cleanup when the parts come off the machine, but you would need to ask them about the details. 👍
I love it, great design, so much fun.
Best money I ever SPENT THANK you sir
Buy the Furter Burner Deluxe at www.wesleytreat.com with *10% OFF and FREE SHIPPING* now through Nov. 29!
I love it - best regards from Germany Nico from Nico’s Projects
Brilliant stuff, but there’s no name like “Single Eater Wiener Heater” 🤣😂🤣😂
Thanks! It's actually "Solo Eater," but in 5 takes, I got it wrong every time and didn't realize till editing. 🤦♂️
👍 nicely done
Nice work!
I wonder if a hole in one of the end panels would let you use this as a stick-fired mini camping grill, so you can feed sticks in as it burns down
watching this i couldn't help but see it as a relative of the firebox camping stove :)
As of now, it includes a detachable handle that enables you to lift the grill when it's hot. I'd love to see someone make it work with wood!
Wes, have you considered putting some kind of stop on the skewer to keep it from hitting the surface of whatever the furter burner is sitting on?
Yes, but then it would make the skewer too short to be useful. I don't think their touching the surface is much of an issue, really.
A dimple on the lower plate instead of a hole might be nice.
I love it! What if the skewers were long enough to protrude through the other end of the Furter and there were skewer rests on each end which left the furter slightly elevated off the grill so they could be rotated/ rotisseried above the grill? Then one could go sit and spin on the furter burner.
Thanks! I considered something like this, but the skewers would have to be kind of stupidly long and wouldn't fit in the flat rate shipping box.
@@WesleyTreat What if you did 2 shorter skewers per wiener instead of 1 long one? 4 short skewers per kit.
Are the files available for people like me outside of ‘Murika’? Shipping to Canada is a costly hassle
This is brilliant. When I want one or two hot dogs and don’t want to fire up the big grill
This guy gets it.
I just ordered two of the kits! I like the product over the patreon. That's just my 11000¢.
Very cool! Tried to order one to ship to Canada but no option.. keep us Canucks notified if that changes! Congrats on the new product.
Working on it! Send me an email through the contract form and I'll try to let you know when it's done. 👍
I'm more impressed that you found wiener tone spray paint. But the FB does look pretty sweet. Thanks for sharing!
You’d be surprised at what colors you can get in spray paint when you look beyond the Lowe’s shelf and visit a proper art supply store
Child: Mom, can we get a Ghostbusters ghost trap?
Mother: We have a Ghostbusters ghost trap at home.
The Ghostbusters trap at home...
Definitely some subconscious influence there. 👻
Looking forward to my Solo Sausage Searing Set ! Glad to see you makin bacon!
This is just to cool. I would order one just to support your store. But it's so cool I'm going to have to order a few for gifts. Any way you could make one for say a new york strip for one or two?
Why no spaceship sounds for the saw ? :P
its masonite or in tassy burnie board made from the bark of one of the trees
This is not the Gonk Droid I'm looking for! But it is cool!
So cool.
Where do you buy hot dog colored spray paint? There can't be a huge market for this.
Rust-Oleum Coral with a light spritz of brown. 👍
Can you offer the plans for sale? Also, why not make a single burger grill?
Hey Wesley, just checking in. Love these videos of yours but haven’t seen anything new in a while. I hope all is well with you and I’m looking forward to seeing your next project. Take care.
Will you ship to Canada?
Working on it. Send me an email through the contact form so I can notify you when it's available. Thanks!
I really like this product. I do have one question. Does it need to be wielded? I mean a little travel bag and small coal container. Cool idea you got these.
Thanks! The Deluxe version is collapsible. 👍
I love seeing your method of "escalating prototypes"!
Dude I hovered over the thumb nail and died.
lol I hadn't noticed that
I can see why you dropped the ' Solo Eater Wiener Heater ' idea cause when you have a dog you never eat alone ! Stay safe Wesley
Hmm.... I've sent the link to the weld up version to a couple people as sly hints for x-mas. I've actually been looking at buying a small Japanese style grill, and this would fit the bill nicely. One recommendation: Build an accessory plate that has a wire mesh instead of the grill grate. Hmm, I'm thinking I might also add a couple little notches to the tabs that hold the grill plate, so I can use skewers. Satay anyone?
I'd love to see your mods. Tag me on Instagram!
@@WesleyTreat Will do! My wife just ordered it for me.
Bad Azz Wes !!!!
I have learned so much 😏
Thank you, sir.
Crazy. But fun. Thank you lol x
Love it!!!
I think the wooden version might work as well. Once.
And when your not grilling, you can use it for your Ghostbuster cosplay nights as a ghost trap ;-)
How is hotdog a colour?
Holy Murder Hornet at 14:14 !!!
I miss the goofy noise the table saw used to make
That freehand tablesaw cut at the start was kind of scary...
Might I add a suggestion? What if you came up with a way to cook a single steak with the same process? That would make someone living in an apartment and wants a steak, VIOLA, one steak on the grill.
I bet you could get nice NY strip on there. 🥩
Whip up a batch of mochi rice and you got yourself a dual purpose Dango Dangler!
ah... a typo. Its Frankfurter :D - this is a great piece of kit!
European... sorry :D
I appreciate your linguistic insights. You might be interested in a book by William Lane Craig, In Quest of the Historical Adam.
Why isn’t the kit as portable as the deluxe version?
I see what ya did there, you’re a tricky one!
So, did the Jetsons saw just get retired?
There's a new saw coming. 😁
Forgot to say, really digging the new look. 😎 In years to come it will probably be referred to as the '2020' look or the 'Covid cut'. 👍 😝
Didn’t know there was a Krylon color code “ grilled wiener”. Is their one for “ raw wiener”?
You should make a Burger version and call it the " Furter Burger Burner " or Fur-Burger for short..Hehe
14:15 Wasp climbing deck rails wants some😂 🐝 🌭
You had me at Stunt Wieners
Wait. Where's the Stunt Buns?
I’m going to be thinking about those authentic looking hot dogs for way too long
Welcome back to the Wiener Warmer channel.
Today we have a new and exciting way to heat your meat.
“Compressed horsehair and ground june bugs”
I think the pick handles should look like hotdog slices.
But what if I want a burger? ;)
as a new viewer, it saddens me that I can no longer buy this kit :(
You can still get the weld-up kit at www.42fab.com/weld-it-yourself/furterburner 🔥🌭
Wet liquid tap water
Very nice, but for me the stunt wieners stole the show.
Would you consider to sell stunt wieners too? xD
And a corporation with Jimmy Diresta would be easy. You make the housing with your logo on the sides and Jimmy gets the grill plate with his logo. Maybe a product for other makers in general so that they could add there logo to it.
I think Jimmy has his name on enough stuff already. 😆
@@WesleyTreat Yeah, not wrong :D
Two franks or one brat!
“Wiener guard” seems like a sure-fire way to get demonetized 🌭
I never heard of a hot dog, or weiner being called a Furter. Is that some kind of a regional thing?
"Stunt Wieners" So many jokes, so little time.
I am curious as to where you found wiener colored paint.
Rust-Oleum Coral. 🌭
I guess Furter Burner sounds better than Wiener Warmer... aaand doesn't sound like it can be something else.
Not being on the site in anyway any more makes me sad.
www.42fab.com/weld-it-yourself/furterburner
"I spent a lot of time in sketch up". Because there is no program called smust ard