Great video! About to attempt this myself. last year I asked my local dealer 3 times to replace the battery while it was in for service and they “forgot”. They then had a meltdown about how I could damage the electronics when I said I would just do it myself. Doesn’t seem too complicated.
Hello Jordan, Glad to hear you like our video. It's not very complicated to replace the battery and we are certain most people out there are able to do it by themselves.
I have a Husqvarna automower 315 that has generally worked well for 4-5 years other than a replacement of the wheel motors a year ago. Its software was also updated at that time. I haven't seen the problem I am having now discussed. It will start and beginning mowing like usual. Then, with around 80% of charge left, it will stop in the middle of the lawn and turn completely off. Flipping the switch on and off does nothing. The only way to get it on again is to take it back to its dock. Once it's in the dock I have to put in my pin then it goes through language and date/time setup and set a new pin. It then says it is at 100% power again but will not start mowing for awhile while it says it is 'charging'. It will start after a bit and do the same thing all over again, stopping and turning full off mid mow with lots of charge left. Does this seem like a battery problem? Or some kind of electrical problem? Hoping a battery change will work but not sure that's the issue.
Hello Brent, We would assume this is due to the battery. It's not very uncommon that this occurs if one(or more) of the battery cells are broken. Then it can not hold charge and will discharge quickly. Which results to this problem. Also the battery indicator might show 80% but is in reality close to 0%. It can also be due to normal battery degradation. After 5 years it's time to replace the battery normally, they don't last longer than this. Best regards
I am facing the same problem as you are describing. I have just recived a new batteri, as i assumed that this is where the problem is. Found this video, and Saw your deskription of the problem. Battery changed with help of this video, and problem solved.😊
My Automower 315x was working fine. Then from one moment to the other it just not working properly anymore. When it finishes the work on the secondary area, I go out to pick the mower. The "welcome wizards" starts after I charge the mower. Before I just needed to charge and everything was fine. Then we changed battery in the robot to a new one but it still does. Do you have any idea what is the problem? Maybe there is a "secondary battery"?
Hello Deaktomi, That's a strange problem. On Automower 315X there is no microbattery. The mainboards stores the settings and information and if you've recently replaced the battery I'd assume it's the mainboard that is the problem. Hard to say though as we've never experienced this problem. We would start by updating the firmware even though we doubt it would make a difference. Our recommendation would be to leave it at an authorized dealer and have them troubleshoot the robot. Best regards
Have you got any solutions to this? I am also experiencing this. My Automower 315 has worked well for 7 years and suddenly this summer the cutting time was low and it could not manage to get back to the charging station before it stopped. I have tried new original battery with no success. Now the mower shuts of after very short cutting time, and I need to put it in the charging station again. When I enter the home screen the battery is almost full.
@@LarsChristianAasen ISsue is not solved. I got new motherboard, new battery. The cut time is okay and it gets back to the charging station, but once it not it immediatly forgots everything. I am very tired of reprogramming it every time. IT happens even when it finishes on the secondary area
@@gplshophelpcenterenglish @LarsChristianAasen ISsue is not solved. I got new motherboard, new battery. The cut time is okay and it gets back to the charging station, but once it not it immediatly forgots everything. I am very tired of reprogramming it every time. IT happens even when it finishes on the secondary area
Great video! About to attempt this myself. last year I asked my local dealer 3 times to replace the battery while it was in for service and they “forgot”. They then had a meltdown about how I could damage the electronics when I said I would just do it myself. Doesn’t seem too complicated.
Hello Jordan,
Glad to hear you like our video. It's not very complicated to replace the battery and we are certain most people out there are able to do it by themselves.
Merci pour le tuto.
J’ai ainsi découvert les connecteurs du câble de capot derrière le joint !
I have a Husqvarna automower 315 that has generally worked well for 4-5 years other than a replacement of the wheel motors a year ago. Its software was also updated at that time.
I haven't seen the problem I am having now discussed. It will start and beginning mowing like usual. Then, with around 80% of charge left, it will stop in the middle of the lawn and turn completely off. Flipping the switch on and off does nothing. The only way to get it on again is to take it back to its dock.
Once it's in the dock I have to put in my pin then it goes through language and date/time setup and set a new pin. It then says it is at 100% power again but will not start mowing for awhile while it says it is 'charging'. It will start after a bit and do the same thing all over again, stopping and turning full off mid mow with lots of charge left.
Does this seem like a battery problem? Or some kind of electrical problem? Hoping a battery change will work but not sure that's the issue.
Hello Brent,
We would assume this is due to the battery. It's not very uncommon that this occurs if one(or more) of the battery cells are broken. Then it can not hold charge and will discharge quickly. Which results to this problem. Also the battery indicator might show 80% but is in reality close to 0%. It can also be due to normal battery degradation. After 5 years it's time to replace the battery normally, they don't last longer than this.
Best regards
@@gplshophelpcenterenglish thank you! As it turns out I did change the battery and it's all better. Appreciate the videos!
I am facing the same problem as you are describing. I have just recived a new batteri, as i assumed that this is where the problem is. Found this video, and Saw your deskription of the problem.
Battery changed with help of this video, and problem solved.😊
thanks to this video I saved 100 euros
My Automower 315x was working fine. Then from one moment to the other it just not working properly anymore. When it finishes the work on the secondary area, I go out to pick the mower. The "welcome wizards" starts after I charge the mower. Before I just needed to charge and everything was fine. Then we changed battery in the robot to a new one but it still does. Do you have any idea what is the problem? Maybe there is a "secondary battery"?
Hello Deaktomi,
That's a strange problem. On Automower 315X there is no microbattery. The mainboards stores the settings and information and if you've recently replaced the battery I'd assume it's the mainboard that is the problem.
Hard to say though as we've never experienced this problem.
We would start by updating the firmware even though we doubt it would make a difference.
Our recommendation would be to leave it at an authorized dealer and have them troubleshoot the robot.
Best regards
Have you got any solutions to this? I am also experiencing this. My Automower 315 has worked well for 7 years and suddenly this summer the cutting time was low and it could not manage to get back to the charging station before it stopped. I have tried new original battery with no success. Now the mower shuts of after very short cutting time, and I need to put it in the charging station again. When I enter the home screen the battery is almost full.
@@LarsChristianAasen ISsue is not solved. I got new motherboard, new battery. The cut time is okay and it gets back to the charging station, but once it not it immediatly forgots everything. I am very tired of reprogramming it every time. IT happens even when it finishes on the secondary area
@@gplshophelpcenterenglish @LarsChristianAasen ISsue is not solved. I got new motherboard, new battery. The cut time is okay and it gets back to the charging station, but once it not it immediatly forgots everything. I am very tired of reprogramming it every time. IT happens even when it finishes on the secondary area
@@deaktomi69 Are you using a genuine battery?
Thanks.