Creo Parametric Basic Tutorial || Sheet Metal
HTML-код
- Опубликовано: 21 авг 2024
- In this tutorial, we will learn about the basic techniques related to ‘Sheet Metal’ functionality of ‘Creo Parametric’ by modelling a Cover.
In the creation process of this model, we will start our work by creating some basic sketches utilising the constrains and dimensions.
Next, we will use the Extrude Tool to create our first feature and use the same to remove some material from the model. Later we will use Flange Tool and take the help of ‘Mirror Tool’ to duplicate the Extrude Cut and Flange feature to the other side of the sheet. Then we will create another Flange that will also be mirrored to the other side as well. A Flat feature will be added next that will be bend along a line. Moving ahead we will unbend a previously created flange to remove some material from the model and then it would be bend back. Again a Flat feature at an angle of 75° will be created… Now we will create a corner between both the visible walls by using the Extend Tool along with a gap of 0.1 mm. So at the last, we will create the Flat Pattern of the model. Next to place the flat pattern and solid model of the part in the drawing sheet we will use Family Table.
Next, we will create a drawing file and put the Flat Pattern part in it along with Bend Lines… and export the drawing sheet to a PDF file…
So let us start the tutorial and watch everything in action…….
..................................................................................
Get the model file by visiting the following link…
nisheeth-invent...
..................................................................................
Hope all of you enjoyed the tutorial. If you find the video useful please like it and share it with your friends/colleagues and do not forget to subscribe me to get latest updates about my new uploads….
....................................................................................................
If you love our work and wanted us to keep continuing the good work then become a patron of ours by visiting the following link...
/ nisheethsri
In return, you will get rewards also...
Thanks for this tutorial. It is an self explained video. Good
Your tutorial is worthy of time.
Thanks a lot.
Excellent demo of sheet metal basics!
I like your way of presentations 😊👍
Superb tutorial...really so useful and educational. Thanks a lot!
Please post more such tutorials.
Thanks for appreciation.
It is very nice lecture as a creo engineer. Thanks :)
You are welcome.
I just want to point out that it is a good practice to Erase unneeded datums from the drawing rather than deleting them, since deleting them can remove them from the main model and cause errors.
Thank you very much for a very good and educational video. Just what I was looking for:-)
You are welcome.
it is too much helpful, to learn sheet metal work in creo,
thanks
You are welcome.
Great video. I prefer written instructions to audio as I can pause and read rather than rewind and listen.
It feels great that my work is helping you in your learning.
super gemacht!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks
problem at 13:55
In Creo 5.0, the feature still fails to regenerate even after specifying opposite sided chains. Can someone please help
Spoken words would have been helpful, but you paused at the right screens for me to be able to point out what you did for each feature. I was trying to figure out how to create an edge flange on PART of an edge instead of the whole thing, and this showed me how.
Thx! this video helps me a lot.
In creo 4, I try to MIRROR the 1st set of flanges and it fails. I have watched it a number of times, doing same settings and it wont let me complete the mirroring.
My doubt is why didnt you directly start with the planar & flanges instead of extrude? Why everytime specifiying sketch when you can utilise default flat/flanges.
Nice video, tkx
Thank you so much.
You are welcome.
superb demo n i want the installation procedure with crack of creo
good, but I'm facing problem at radius bend on corner for flat or Flange. There is too much gap between those bend. for example bowl corner of radius 25 mm. I solve it manually by practice is any trick for that.
Hi, i like your video. And it seem like you are an expert in NX, inventor, Creo. If i become a patron will you show me some technique as request??. Each industry use software differently. Thanks
cảm ơn
@ 10:23 I'm not able to select two edges as you did in the video, in the flange option. If try to hold control, the edge reference is not showing up. What should I do?
I got it now by holding shift and selecting multiple edges.
please make a video for sheet metal enclosure with meter cut command using we are waiting for that video sir
Problems in mirroring of flange, when I mirror there is error in sketch, then I have to redraw the sketches again..what's the proble
Please mention the video time where you are getting the problem and share the screen shot of your work window on our facebook page so we can understand what is the problem.
Please give your Facebook link
@@dhanushacharya8286 Check the about page of this channel it is mentioned there.
@@3DSolidModellingVideosCreo Sir I messaged you on the facebook with the time stamp, snapshot and the problem description. Kindly check
i am fresher now in this design field so how i can make company's model design for practices and how to make my carrier in this field i don't have any sheetmetal models for practice. so you have any website where i will download some models.
You should practice on sheet metal and spend some time working with software. I have created some tutorial in creo related to aforesaid topic which you can check out at following link...bit.ly/nis_creosheetmetal . The finished model files are available to download related to these tutorials. Check out their video description to find.
You can visit Grabcad site and search with the term Creo Parametric sheet metal model for more detailed work. There models are available to download and you can discuss about it with creators of model and take part in community discussions. People will help and guide you. Addition to this join official Creo Forum.. The links of forum are mentioned in Channel about page.
thanks for that its help full for me but its compulsory one designer knows everything means modelig drafting and analysis i do know the analysis if you give me suggestion for the analysis practice then i will do that also.
what about dimensions in drawing
hi
Can you upload the punch operation on bend part
and share the link also
HELLO MY DEAR SIR NISHEETH SRIVASTAVA.......
SIR i want to take training of sheetmetal model and drawing so please help and give me training .......... GOD HELP YOU AND YOUR FAMILY SIR
This Creo 3.0 release when? is it 2015? thanks
It is 17 June 2014.
3D Solid Modelling Videos - Creo thank you Sir
at 10:21, am unable to select another edge
I had the same problem. I was able to select multiple edges by clicking "Details" and selecting multiple references.
after selecting the first edge, press shift and then select the next edge. it will become a chain.
thank you, I was stuck trying ctrl
i now what is possible, but dont know how do it.... weak movie
What did you not understand.
Too bad this video doesn't have spoken instructions......
Send me this design documents
Sorry drawing sheets are not available.
borning..withot how to take it is meaninglesss
Open your mouth please